Simple numerical strategies to model freezing in variably-saturated soil with the standard finite element method

Author(s):  
Johanna Blöcher ◽  
Petr Mayer ◽  
Michal Kuraz

<p>An accurate representation of freezing and thawing in soil covers many applications including simulation of land surface processes, hydrology, and degrading permafrost. Freezing and thawing tightly couple water and heat flow, where temperature and temperature gradients influence the water flow and phase changes, and water content and flow influence the heat transport. In most porous media, the interface between liquid and frozen water is not sharp and a slushy zone is present. A common observation of freezing soil is water accumulation towards the freezing front due to Cryosuction. A mathematical model can be derived using the Clausius-Clapeyron equation, which allows the derivation of a soil freezing curve relating temperature to pressure head. This is based on the assumption that soil freezing is similar to soil drying.</p><p>Many models still lack features such as Cryosuction. We believe that this may be due to numerical issues that model developers face with their current solver and discretization setup. Implementing freezing soil accurately is not straight-forward. Using the Clausius-Clapeyron creates a discontinuity in the freezing rate and latent heat at the freezing point and little attention has been paid to the adequate description of their numerical treatment and computational challenges. Discretizing this discontinuous system with standard finite element methods (standard Galerkin type) can cause spurious oscillations because the standard finite element method uses continuous base/shape functions that are incapable of handling discontinuity of any kind within an element. Similarly, standard finite difference methods are also not capable of handling discontinuities. In this contribution, we present the application of regularization of the discontinuous term, which allows the use of the standard finite element method. We implemented the model in the open-source code base DRUtES (www.drutes.org). We verify this approach on synthetic and various real freezing soil column experiments conducted by Jame (1977) and Mizoguchi (1990).</p><p>Jame, Y.-W., Norum, D.I., 1980. Heat and mass transfer in a freezing unsaturated porous medium. Water Resources Research 16, 811–819. https://doi.org/10.1029/WR016i004p00811</p><p>Mizoguchi, M., 1990. Water, heat and salt transport in freezing soil. sensible and latent heat flow in a partially frozen unsaturated soil. University of Tokyo.</p><p> </p>

Author(s):  
Виктор Григорьевич Чеверев ◽  
Евгений Викторович Сафронов ◽  
Алексей Александрович Коротков ◽  
Александр Сергеевич Чернятин

Существуют два основных подхода решения задачи тепломассопереноса при численном моделировании промерзания грунтов: 1) решение методом конечных разностей с учетом граничных условий (границей, например, является фронт промерзания); 2) решение методом конечных элементов без учета границ модели. Оба подхода имеют существенные недостатки, что оставляет проблему решения задачи для численной модели промерзания грунтов острой и актуальной. В данной работе представлена физическая постановка промерзания, которая позволяет создать численную модель, базирующуюся на решении методом конечных элементов, но при этом отражающую ход фронта промерзания - то есть модель, в которой объединены оба подхода к решению задачи промерзания грунтов. Для подтверждения корректности модели был проделан ряд экспериментов по физическому моделированию промерзания модельного грунта и выполнен сравнительный анализ полученных экспериментальных данных и результатов расчетов на базе представленной численной модели с такими же граничными условиями, как в экспериментах. There are two basic approaches to solving the problem of heat and mass transfer in the numerical modeling of soil freezing: 1) using the finite difference method taking into account boundary conditions (the boundary, for example, is the freezing front); 2) using the finite element method without consideration of model boundaries. Both approaches have significant drawbacks, which leaves the issue of solving the problem for the numerical model of soil freezing acute and up-to-date. This article provides the physical setting of freezing that allows us to create a numerical model based on the solution by the finite element method, but at the same time reflecting the route of the freezing front, i.e. the model that combines both approaches to solving the problem of soil freezing. In order to confirm the correctness of the model, a number of experiments on physical modeling of model soil freezing have been performed, and a comparative analysis of the experimental data obtained and the calculation results based on the provided numerical model with the same boundary conditions as in the experiments was performed.


Author(s):  
D. Bucco ◽  
J. Mazumdar

AbstractA simple and efficient numerical technique for the buckling analysis of thin elastic plates of arbitrary shape is proposed. The approach is based upon the combination of the standard Finite Element Method with the constant deflection contour method. Several representative plate problems of irregular boundaries are treated and where possible, the obtained results are validated against corresponding results in the literature.


1982 ◽  
Vol 104 (2) ◽  
pp. 323-328 ◽  
Author(s):  
P. E. Frivik ◽  
G. Comini

In this paper we describe a system of computer programs based on the finite element method, which can be used for the calculation of coupled velocity and temperature fields during freezing and thawing of soils in the presence of seepage flow. In the programs, the mass and energy conservation equations are solved simultaneously, without the use of too limiting assumptions. The results of the computations are compared with experimental measurements made on a laboratory model of a soil freezing system, and the agreement between measured and computed values is good.


2007 ◽  
Vol 348-349 ◽  
pp. 941-944
Author(s):  
Li Juan Cao ◽  
Shou Ju Li ◽  
Zi Chang Shangguan

Freezing and thawing damage is one of the major problems of concrete dams in cold climate. Cracking and splitting are the most common results of freezing and thawing deterioration in concrete dam. The cracking problem owing to freezing and thawing was investigated by making sue of finite element methods. The interpretation of the mechanism of failure was also given. In order to compute the thermal stress fields of concrete dam caused by freezing and thawing, the temperature changes versus seasons is determined according to measured data. The temperature fields of concrete dam versus seasons are simulated by using finite element method. Basing on the computational results of the temperature fields of concrete dam, the thermal stress fields are calculated numerically. The researches show that the first principal stress of concrete dam at downstream surface can exceed the tensile strength of concrete material. The numerical simulation results of fractured regions of concrete dam agreed with practical observed data.


2012 ◽  
Vol 37 (13) ◽  
pp. 10028-10035 ◽  
Author(s):  
B. Bulfin ◽  
B.E. Murphy ◽  
O. Lübben ◽  
S.A. Krasnikov ◽  
I.V. Shvets

Sign in / Sign up

Export Citation Format

Share Document