scholarly journals A radiative transfer module for calculating photolysis rates and solar heating in climate models: Solar-J v7.5

2017 ◽  
Vol 10 (7) ◽  
pp. 2525-2545 ◽  
Author(s):  
Juno Hsu ◽  
Michael J. Prather ◽  
Philip Cameron-Smith ◽  
Alex Veidenbaum ◽  
Alex Nicolau
Keyword(s):  
Radiative Transfer ◽  
General Circulation ◽  
Solar Spectrum ◽  
Solar Heating ◽  
Gas Absorption ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Cirrus Cloud ◽  
Stratus Cloud ◽  
Photolysis Rates

Abstract. Solar-J is a comprehensive radiative transfer model for the solar spectrum that addresses the needs of both solar heating and photochemistry in Earth system models. Solar-J is a spectral extension of Cloud-J, a standard in many chemical models that calculates photolysis rates in the 0.18–0.8 µm region. The Cloud-J core consists of an eight-stream scattering, plane-parallel radiative transfer solver with corrections for sphericity. Cloud-J uses cloud quadrature to accurately average over correlated cloud layers. It uses the scattering phase function of aerosols and clouds expanded to eighth order and thus avoids isotropic-equivalent approximations prevalent in most solar heating codes. The spectral extension from 0.8 to 12 µm enables calculation of both scattered and absorbed sunlight and thus aerosol direct radiative effects and heating rates throughout the Earth's atmosphere.The Solar-J extension adopts the correlated-k gas absorption bins, primarily water vapor, from the shortwave Rapid Radiative Transfer Model for general circulation model (GCM) applications (RRTMG-SW). Solar-J successfully matches RRTMG-SW's tropospheric heating profile in a clear-sky, aerosol-free, tropical atmosphere. We compare both codes in cloudy atmospheres with a liquid-water stratus cloud and an ice-crystal cirrus cloud. For the stratus cloud, both models use the same physical properties, and we find a systematic low bias of about 3 % in planetary albedo across all solar zenith angles caused by RRTMG-SW's two-stream scattering. Discrepancies with the cirrus cloud using any of RRTMG-SW's three different parameterizations are as large as about 20–40 % depending on the solar zenith angles and occur throughout the atmosphere.Effectively, Solar-J has combined the best components of RRTMG-SW and Cloud-J to build a high-fidelity module for the scattering and absorption of sunlight in the Earth's atmosphere, for which the three major components – wavelength integration, scattering, and averaging over cloud fields – all have comparably small errors. More accurate solutions with Solar-J come with increased computational costs, about 5 times that of RRTMG-SW for a single atmosphere. There are options for reduced costs or computational acceleration that would bring costs down while maintaining improved fidelity and balanced errors.

scholarly journals A Radiative Transfer Module for Calculating Photolysis Rates and Solar Heating in Climate Models: Solar-J 7.5

2017 ◽  
Author(s):  
Juno Hsu ◽  
Michael Prather ◽  
Philip Cameron-Smith ◽  
Alex Veidenbaum ◽  
Alex Nicolau
Keyword(s):  
Radiative Transfer ◽  
Solar Spectrum ◽  
Solar Heating ◽  
Gas Absorption ◽  
Transfer Model ◽  
Cirrus Cloud ◽  
Stratus Cloud ◽  
Earth’S Atmosphere ◽  
Photolysis Rates ◽  
Earth's Atmosphere

Abstract. Solar-J is a comprehensive model for radiative transfer over the solar spectrum that addresses the needs of both photochemistry and solar heating in Earth system models. Solar-J includes an 8-stream scattering, plane-parallel radiative transfer solver with corrections for sphericity. It uses the scattering phase function of aerosols and clouds expanded to 8th order and thus makes no isotropic-equivalent approximations that are prevalent in most solar heating codes. It calculates both chemical photolysis rates and the absorption of sunlight and thus the heating rates throughout the Earth's atmosphere. Solar-J is a spectral extension of Fast-J, a standard in many chemical models that calculates photolysis rates in the 0.18–0.85 μm region. For solar heating, Solar-J extends its calculation out to 12 μm using correlated-k gas absorption bins in the infrared from the shortwave Rapid Radiative Transfer Model for GCM applications (RRTMG-SW). Solar-J successfully matches RRTMG's atmospheric heating profile in a clear-sky, aerosol-free, tropical atmosphere. We compare both codes in cloudy atmospheres with a liquid-water stratus cloud and an ice-crystal cirrus cloud. For the stratus cloud both models use the same physical properties, and we find a systematic low bias in the RRTMG-SW of about 3 % in planetary albedo across all solar zenith angles, caused by RRTMG-SW's 2-stream scattering. Discrepancies with the cirrus cloud using any of RRTMG's three different parameterizations are larger, less systematic, and occur throughout the atmosphere. Effectively, Solar-J has combined the best components of RRTMG and Fast-J to build a high-fidelity module for the scattering and absorption of sunlight in the Earth's atmosphere, for which the three major components – wavelength integration, scattering, and averaging over cloud fields all have comparably small errors. More accurate solutions come with increased computational costs, about 5x that of RRTMG, but there are options for reduced costs or computational acceleration that would bring costs down while maintaining balanced errors across components and improved fidelity.

scholarly journals Improvement of the Simulation of Cloud Longwave Scattering in Broadband Radiative Transfer Models

2018 ◽  
Vol 75 (7) ◽  
pp. 2217-2233 ◽  
Author(s):  
Guanglin Tang ◽  
Ping Yang ◽  
George W. Kattawar ◽  
Xianglei Huang ◽  
Eli J. Mlawer ◽  
...  
Keyword(s):  
Radiative Transfer ◽  
Multiple Scattering ◽  
General Circulation ◽  
General Circulation Models ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Discrete Ordinate ◽  
Wide Range ◽  
Scaling Methods ◽  
Computational Errors

Abstract Cloud longwave scattering is generally neglected in general circulation models (GCMs), but it plays a significant and highly uncertain role in the atmospheric energy budget as demonstrated in recent studies. To reduce the errors caused by neglecting cloud longwave scattering, two new radiance adjustment methods are developed that retain the computational efficiency of broadband radiative transfer simulations. In particular, two existing scaling methods and the two new adjustment methods are implemented in the Rapid Radiative Transfer Model (RRTM). The results are then compared with those based on the Discrete Ordinate Radiative Transfer model (DISORT) that explicitly accounts for multiple scattering by clouds. The two scaling methods are shown to improve the accuracy of radiative transfer simulations for optically thin clouds but not effectively for optically thick clouds. However, the adjustment methods reduce computational errors over a wide range, from optically thin to thick clouds. With the adjustment methods, the errors resulting from neglecting cloud longwave scattering are reduced to less than 2 W m−2 for the upward irradiance at the top of the atmosphere and less than 0.5 W m−2 for the surface downward irradiance. The adjustment schemes prove to be more accurate and efficient than a four-stream approximation that explicitly accounts for multiple scattering. The neglect of cloud longwave scattering results in an underestimate of the surface downward irradiance (cooling effect), but the errors are almost eliminated by the adjustment methods (warming effect).

scholarly journals Technical Note: A novel parameterization of the transmissivity due to ozone absorption in the <i>k</i>-distribution method and correlated-<i>k</i> approximation of Kato et al. (1999) over the UV band

2015 ◽  
Vol 15 (13) ◽  
pp. 7449-7456 ◽  
Author(s):  
W. Wandji Nyamsi ◽  
A. Arola ◽  
P. Blanc ◽  
A. V. Lindfors ◽  
V. Cesnulyte ◽  
...  
Keyword(s):  
Radiative Transfer ◽  
Solar Spectrum ◽  
Ground Level ◽  
Technical Note ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Spectral Interval ◽  
Computationally Efficient ◽  
Ozone Absorption ◽  
Distribution Method

Abstract. The k-distribution method and the correlated-k approximation of Kato et al. (1999) is a computationally efficient approach originally designed for calculations of the broadband solar radiation at ground level by dividing the solar spectrum in 32 specific spectral bands from 240 to 4606 nm. Compared to a spectrally resolved computation, its performance in the UV band appears to be inaccurate, especially in the spectral intervals #3 [283, 307] nm and #4 [307, 328] nm because of inaccuracy in modeling the transmissivity due to ozone absorption. Numerical simulations presented in this paper indicate that a single effective ozone cross section is insufficient to accurately represent the transmissivity over each spectral interval. A novel parameterization of the transmissivity using more quadrature points yields maximum errors of respectively 0.0006 and 0.0143 for intervals #3 and #4. How to practically implement this new parameterization in a radiative transfer model is discussed for the case of libRadtran (library for radiative transfer). The new parameterization considerably improves the accuracy of the retrieval of irradiances in UV bands.

scholarly journals Development of a GOES-R Advanced Baseline Imager Solar Channel Radiance Simulator for Ice Clouds

2013 ◽  
Vol 52 (4) ◽  
pp. 872-888 ◽  
Author(s):  
Shouguo Ding ◽  
Ping Yang ◽  
Bryan A. Baum ◽  
Andrew Heidinger ◽  
Thomas Greenwald
Keyword(s):  
Radiative Transfer ◽  
Spectral Response ◽  
Three Dimensional ◽  
Gas Absorption ◽  
Radiative Transfer Model ◽  
Discrete Ordinates ◽  
Transfer Model ◽  
Water Vapor Absorption ◽  
Ice Clouds ◽  
Ice Cloud

AbstractThis paper describes the development of an ice cloud radiance simulator for the anticipated Geostationary Operational Environmental Satellite R (GOES-R) Advanced Baseline Imager (ABI) solar channels. The simulator is based on the discrete ordinates radiative transfer (DISORT) model. A set of correlated k-distribution (CKD) models is developed for the ABI solar channels to account for atmospheric trace gas absorption. The CKD models are based on the ABI spectral response functions and also consider when multiple gases have overlapping absorption. The related errors of the transmittance profile are estimated on the basis of the exact line-by-line results, and it is found that errors in transmittance are less than 0.2% for all but one of the ABI solar channels. The exception is for the 1.378-μm channel, centered near a strong water vapor absorption band, for which the errors are less than 2%. For ice clouds, the band-averaged bulk-scattering properties for each ABI [and corresponding Moderate Resolution Imaging Spectroradiometer (MODIS)] solar channel are derived using an updated single-scattering property database of both smooth and severely roughened ice particles, which include droxtals, hexagonal plates, hexagonal hollow and solid columns, three-dimensional hollow and solid bullet rosettes, and several types of aggregates. The comparison shows close agreement between the radiance simulator and the benchmark model, the line-by-line radiative transfer model (LBLRTM)+DISORT model. The radiances of the ABI and corresponding MODIS measurements are compared. The results show that the radiance differences between the ABI and MODIS channels under ice cloud conditions are likely due to the different band-averaged imaginary indices of refraction.

scholarly journals A new gas absorption optical depth parameterisation for RTTOV version 13

2021 ◽  
Vol 14 (5) ◽  
pp. 2899-2915
Author(s):  
James Hocking ◽  
Jérôme Vidot ◽  
Pascal Brunel ◽  
Pascale Roquet ◽  
Bruna Silveira ◽  
...  
Keyword(s):  
Solar Radiation ◽  
Radiative Transfer ◽  
Optical Depth ◽  
Weather Prediction ◽  
Current Approach ◽  
Gas Absorption ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Wide Range ◽  
Microwave Radiances

Abstract. This paper describes a new gas optical depth parameterisation implemented in the most recent release, version 13, of the radiative transfer model RTTOV (Radiative Transfer for TOVS). RTTOV is a fast, one-dimensional radiative transfer model for simulating top-of-atmosphere visible, infrared, and microwave radiances observed by downward-viewing space-borne passive sensors. A key component of the model is the fast parameterisation of absorption by the various gases in the atmosphere. The existing parameterisation in RTTOV has been extended over many years to allow for additional variable gases in RTTOV simulations and to account for solar radiation and better support geostationary sensors by extending the validity to higher zenith angles. However, there are limitations inherent in the current approach which make it difficult to develop it further, for example by adding new variable gases. We describe a new parameterisation that can be applied across the whole spectrum, that allows for a wide range of zenith angles in support of solar radiation and geostationary sensors, and for which it will be easier to add new variable gases in support of user requirements. Comparisons against line-by-line radiative transfer simulations and against observations in the ECMWF operational system yield promising results, suggesting that the new parameterisation generally compares well with the old one in terms of accuracy. Further validation is planned, including testing in operational numerical weather prediction data assimilation systems.

scholarly journals Evaluating and improving the treatment of gases in radiation schemes: the Correlated K-Distribution Model Intercomparison Project (CKDMIP)

2020 ◽  
Author(s):  
Robin J. Hogan ◽  
Marco Matricardi
Keyword(s):  
General Circulation ◽  
Computational Cost ◽  
General Circulation Models ◽  
Gas Absorption ◽  
Distribution Model ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Climate Modelling ◽  
Model Intercomparison ◽  
Intercomparison Project

Abstract. Most radiation schemes in weather and climate models use the 'correlated k-distribution' (CKD) method to treat gas absorption, which approximates a broadband spectral integration by N pseudo-monochromatic calculations. Larger N means more accuracy and a wider range of gas concentrations can be simulated, but at greater computational cost. Unfortunately, the tools to perform this efficiency-accuracy trade-off (e.g., to generate separate CKD models for applications such as short-range weather forecasting to climate modelling) are unavailable to the vast majority of users of radiation schemes. This paper describes the experimental protocol for the Correlated K-Distribution Model Intercomparison Project (CKDMIP), whose purpose is to use benchmark line-by-line calculations: (1) to evaluate the accuracy of existing CKD models, (2) to explore how accuracy varies with N for CKD models submitted by CKDMIP participants, (3) to understand how different choices in way that CKD models are generated affects their accuracy for the same N, and (4) to generate freely available datasets and software facilitating the development of new gas-optics tools. The datasets consist of the high-resolution longwave and shortwave absorption spectra of nine gases for a range of atmospheric conditions, realistic and idealized. Thirty-four concentration scenarios for the well-mixed greenhouse gases are proposed to test CKD models from palaeo- to future-climate conditions. We demonstrate the strengths of the protocol in this paper by using it to evaluate the widely-used Rapid Radiative Transfer Model for General Circulation Models (RRTMG).

scholarly journals Technical Note: A new discrete ordinate first-order rotational Raman scattering radiative transfer model – implementation and first results

2011 ◽  
Vol 11 (20) ◽  
pp. 10471-10485 ◽  
Author(s):  
A. Kylling ◽  
B. Mayer ◽  
M. Blumthaler
Keyword(s):  
Radiative Transfer ◽  
Raman Scattering ◽  
Solar Spectrum ◽  
Technical Note ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Discrete Ordinate ◽  
First Order ◽  
Spectral Interpolation ◽  
First Results

Abstract. Rotational Raman scattering in the Earth's atmosphere explains the filling-in of Fraunhofer lines in the solar spectrum. A new model including first-order rotational Raman scattering has been developed, based on a reimplementation of the versatile discrete ordinate radiative transfer (DISORT) solver in the C computer language. The solver is fully integrated in the freely available libRadtran radiative transfer package. A detailed description is given of the model including the spectral resolution and a spectral interpolation scheme that considerably speeds up the calculations. The model is used to demonstrate the effect of clouds on top and bottom of the atmosphere filling-in factors and differential optical depths. Cloud effects on vertical profiles of the filling-in factor are also presented. The spectral behaviour of the model is compared against measurements under thunderstorm and aerosol loaded conditions.

Sign in / Sign up

Export Citation Format

Share Document