scholarly journals Improving river flow generation over Great Britain in a land surface model required for coupled land-atmosphere interactions

2018 ◽  
Author(s):  
Alberto Martínez-de la Torre ◽  
Eleanor M. Blyth ◽  
Graham P. Weedon
Keyword(s):  
Great Britain ◽  
Surface Runoff ◽  
Land Surface ◽  
River Flow ◽  
Land Surface Model ◽  
Soil Conditions ◽  
Surface Model ◽  
Climate Modelling ◽  
Operational Systems ◽  
Runoff Production

Abstract. Land surface models (LSMs) represent terrestrial hydrology in weather and climate modelling operational systems and research studies. Using river flow observations from gauge stations, we study the capability of the Joint UK Land Environment Simulator (JULES) LSM to simulate river flow over 13 catchments in Great Britain, each representing different climatic and topographic characteristics at the 1 km2 spatial resolution. A series of tests, carried out to identify where the model results are sensitive to the scheme and parameters chosen for runoff production, suggests that different catchments require different parameters and even different runoff schemes to produce the best results. From these results, we introduce a new topographical parametrization that produces the best daily river flow results (in terms of Nash-Sutcliffe efficiency and mean bias) for all 13 catchments. The new parametrization introduces a dependency on terrain slope, constraining surface runoff production to wet soil conditions over flatter regions (like the Thames catchment; Nash-Sutcliffe efficiency above 0.8), whereas over steeper regions the model produces surface runoff for every rainfall event regardless of the soil wetness state. This new parametrization improves the model capability in regional (Great Britain wide) assessments. The new choice of parameters is reinforced by examining the amplitude and phase of the modelled versus observed river flows, via cross-spectral analysis for time scales longer than daily.

scholarly journals Using observed river flow data to improve the hydrological functioning of the JULES land surface model (vn4.3) used for regional coupled modelling in Great Britain (UKC2)

2019 ◽  
Vol 12 (2) ◽  
pp. 765-784 ◽  
Author(s):  
Alberto Martínez-de la Torre ◽  
Eleanor M. Blyth ◽  
Graham P. Weedon
Keyword(s):  
Great Britain ◽  
Surface Runoff ◽  
Land Surface ◽  
River Flow ◽  
Model Performance ◽  
Soil Conditions ◽  
Surface Model ◽  
Climate Modelling ◽  
Prediction System ◽  
Runoff Production

Abstract. Land surface models (LSMs) represent terrestrial hydrology in weather and climate modelling operational systems and research studies. We aim to improve hydrological performance in the Joint UK Land Environment Simulator (JULES) LSM that is used for distributed hydrological modelling within the new land–atmosphere–ocean coupled prediction system UKC2 (UK regional Coupled environmental prediction system 2). Using river flow observations from gauge stations, we study the capability of JULES to simulate river flow at 1 km2 spatial resolution within 13 catchments in Great Britain that exhibit a variety of climatic and topographic characteristics. Tests designed to identify where the model results are sensitive to the scheme and parameters chosen for runoff production indicate that different catchments require different parameters and even different runoff schemes for optimal results. We introduce a new parameterisation of topographic variation that produces the best daily river flow results (in terms of Nash–Sutcliffe efficiency and mean bias) for all 13 catchments. The new parameterisation introduces a dependency on terrain slope, constraining surface runoff production to wet soil conditions over flatter regions, whereas over steeper regions the model produces surface runoff for every rainfall event regardless of the soil wetness state. This new parameterisation improves the model performance across Great Britain. As an example, in the Thames catchment, which has extensive areas of flat terrain, the Nash–Sutcliffe efficiency exceeds 0.8 using the new parameterisation. We use cross-spectral analysis to evaluate the amplitude and phase of the modelled versus observed river flows over timescales of 2 days to 10 years. This demonstrates that the model performance is modified by changing the parameterisation by different amounts over annual, weekly-to-monthly and multi-day timescales in different catchments, providing insights into model deficiencies on particular timescales, but it reinforces the newly developed parameterisation.

scholarly journals Using observed river flow data to improve the hydrological functioning of the JULES land surface model (vn4.3) used for regional coupled modelling in Great Britain (UKC2)

2018 ◽  
Author(s):  
Alberto Martínez-de la Torre ◽  
Eleanor M. Blyth ◽  
Graham P. Weedon
Keyword(s):  
Great Britain ◽  
Surface Runoff ◽  
Land Surface ◽  
River Flow ◽  
Soil Conditions ◽  
Surface Model ◽  
Climate Modelling ◽  
Prediction System ◽  
Coupled Modelling ◽  
Runoff Production

Abstract. Land surface models (LSMs) represent terrestrial hydrology in weather and climate modelling operational systems and research studies. We aim to improve hydrological performance in the Joint UK Land Environment Simulator (JULES) LSM that is suitable for distributed hydrological modelling within the new land-atmosphere-ocean coupled prediction system UKC2 (UK regional Coupled environmental prediction system 2). Using river flow observations from gauge stations, we study the capability of JULES to simulate river flow over 13 catchments in Great Britain, each representing different climatic and topographic characteristics at 1 km2 spatial resolution. A series of tests, carried out to identify where the model results are sensitive to the scheme and parameters chosen for runoff production, suggests that different catchments require different parameters and even different runoff schemes to produce the best results. From these results, we introduce a new topographical parametrization that produces the best daily river flow results (in terms of Nash-Sutcliffe efficiency and mean bias) for all 13 catchments. The new parametrization introduces a dependency on terrain slope, constraining surface runoff production to wet soil conditions over flatter regions (like the Thames catchment; Nash-Sutcliffe efficiency above 0.8), whereas over steeper regions the model produces surface runoff for every rainfall event regardless of the soil wetness state. This new parametrization improves the model capability in regional (Great Britain wide) assessments. The new choice of parameters is reinforced by examining the amplitude and phase of the modelled versus observed river flows, via cross-spectral analysis for time scales longer than daily.

River parametrisation of the JULES land surface model for improved runoff routing at the global scale.

2021 ◽  
Author(s):  
Aristeidis Koutroulis ◽  
Manolis Grillakis ◽  
Camilla Mathison ◽  
Eleanor Burke
Keyword(s):  
Spatial Resolution ◽  
Land Surface ◽  
River Flow ◽  
Land Surface Model ◽  
Flow Simulation ◽  
Surface Model ◽  
Routing Scheme ◽  
Basin Scale ◽  
River Flow Simulation ◽  
River Routing

<p>The JULES land surface model has a wide ranging application in studying different processes of the earth system including hydrological modeling [1]. Our aim is to tune the existing configuration of the global river routing scheme at 0.5<sup>o</sup> spatial resolution [2] and improve river flow simulation performance at finer temporal scales. To do so, we develop a factorial experiment of varying effective river velocity and meander coefficient, components of the Total Runoff Integrating Pathways (TRIP) river routing scheme. We test and adjust best performing configurations at the basin scale based on observations from GRDC 230 stations that exhibiting a variety of hydroclimatic and physiographic conditions. The analysis was focused on watersheds of near-natural conditions [3] to avoid potential influences of human management on river flow. The HydroATLAS database [4] was employed to identify basin scale descriptive hydro-environmental indicators that could be associated with the components of the TRIP. These indicators summarize hydrologic and physiographic characteristics of the drainage area of each flow gauge. For each basin we select the best performing set of TRIP parameters per basin resulting to the optimal efficiency of river flow simulation based on the Nash–Sutcliffe and Kling–Gupta efficiency metrics. We find that better performance is driven predominantly by characteristics related to the stream gradient and terrain slope. These indicators can serve as descriptors for extrapolating the adjustment of TRIP parameters for global land configurations at 0.5<sup>o</sup> spatial resolution using regression models.</p><p> </p><p>[1] Papadimitriou et al 2017, Hydrol. Earth Syst. Sci., 21, 4379–4401</p><p>[2] Falloon et al 2007. Hadley Centre Tech. Note 72, 42 pp.</p><p>[3] Fang Zhao et al 2017 Environ. Res. Lett. 12 075003</p><p>[4] Linke et al 2019, Scientific Data 6: 283.</p>

scholarly journals Improved representations of coupled soil-canopy processes in the CABLE land surface model

2016 ◽  
Author(s):  
Vanessa Haverd ◽  
Matthias Cuntz ◽  
Lars P. Nieradzik ◽  
Ian N. Harman
Keyword(s):  
Water Use ◽  
Land Surface ◽  
Land Surface Model ◽  
Heat Fluxes ◽  
Soil Conditions ◽  
Surface Model ◽  
Drought Response ◽  
Deep Soil ◽  
Stable Conditions ◽  
Water Use Efficiencies

Abstract. CABLE is a global land surface model, which has been used extensively in offline and coupled simulations. While CABLE performs well in comparison with other land surface models, results are impacted by decoupling of transpiration and photosynthesis fluxes under drying soil conditions, often leading to implausibly high water use efficiencies. Here we present a solution to this problem, ensuring that modeled transpiration is always consistent with modeled photosynthesis, while introducing a parsimonious single-parameter drought response function which is coupled to root water uptake. We further improve CABLE’s simulation of coupled soil-canopy processes by introducing an alternative hydrology model with a physically accurate representation of coupled energy and water fluxes at the soil/air interface, including a more realistic formulation of transfer under atmospherically stable conditions within the canopy and in the presence of leaf litter. The effects of these model developments are assessed using data from 18 stations from the global Eddy covariance flux network FLUXNET, selected to span a large climatic range. Marked improvements are demonstrated, with root-mean-squared errors for monthly latent heat fluxes and water use efficiencies being reduced by 40 %. Results highlight the important roles of deep soil moisture in mediating drought response and litter in dampening soil evaporation.

scholarly journals ORCHIDEE-ROUTING: A new river routing scheme using a high resolution hydrological database

2018 ◽  
Author(s):  
Trung Nguyen-Quang ◽  
Jan Polcher ◽  
Agnès Ducharne ◽  
Thomas Arsouze ◽  
Xudong Zhou ◽  
...  
Keyword(s):  
High Resolution ◽  
Land Surface ◽  
River Flow ◽  
Anthropogenic Impacts ◽  
Computational Cost ◽  
Land Surface Model ◽  
Surface Model ◽  
Routing Scheme ◽  
Wide Range ◽  
River Routing

Abstract. This study presents a revised river routing scheme (RRS) for the Organising Carbon and Hydrology in Dynamic Ecosystems (ORCHIDEE) land surface model. The revision is carried out to benefit from the high resolution topography provided the Hydrological data and maps based on SHuttle Elevation Derivatives at multiple Scales (HydroSHEDS), processed to a resolution of approximately 1 kilometer. The RRS scheme of the ORCHIDEE uses a unit-to-unit routing concept which allows to preserve as much of the hydrological information of the HydroSHEDS as the user requires. The evaluation focuses on 12 rivers of contrasted size and climate which contribute freshwater to the Mediterranean Sea. First, the numerical aspect of the new RRS is investigated, to identify the practical configuration offering the best trade-off between computational cost and simulation quality for ensuing validations. Second, the performance of the revised scheme is evaluated against observations at both monthly and daily timescales. The new RRS captures satisfactorily the seasonal variability of river discharges, although important biases come from the water budget simulated by the ORCHIDEE model. The results highlight that realistic streamflow simulations require accurate precipitation forcing data and a precise river catchment description over a wide range of scales, as permitted by the new RRS. Detailed analyses at the daily timescale show promising performances of this high resolution RRS for replicating river flow variation at various frequencies. Eventually, this RRS is well adapted for further developments in the ORCHIDEE land surface model to assess anthropogenic impacts on river processes (e.g. damming for irrigation operation).

scholarly journals ORCHIDEE-ROUTING: revising the river routing scheme using a high-resolution hydrological database

2018 ◽  
Vol 11 (12) ◽  
pp. 4965-4985 ◽  
Author(s):  
Trung Nguyen-Quang ◽  
Jan Polcher ◽  
Agnès Ducharne ◽  
Thomas Arsouze ◽  
Xudong Zhou ◽  
...  
Keyword(s):  
High Resolution ◽  
Land Surface ◽  
River Flow ◽  
Anthropogenic Impacts ◽  
Computational Cost ◽  
Land Surface Model ◽  
Surface Model ◽  
Routing Scheme ◽  
Wide Range ◽  
River Routing

Abstract. The river routing scheme (RRS) in the Organising Carbon and Hydrology in Dynamic Ecosystems (ORCHIDEE) land surface model is a valuable tool for closing the water cycle in a coupled environment and for validating the model performance. This study presents a revision of the RRS of the ORCHIDEE model that aims to benefit from the high-resolution topography provided by the Hydrological data and maps based on SHuttle Elevation Derivatives at multiple Scales (HydroSHEDS), which is processed to a resolution of approximately 1 km. Adapting a new algorithm to construct river networks, the new RRS in ORCHIDEE allows for the preservation of as much of the hydrological information from HydroSHEDS as the user requires. The evaluation focuses on 12 rivers of contrasting size and climate which contribute freshwater to the Mediterranean Sea. First, the numerical aspect of the new RRS is investigated, in order to identify the practical configuration offering the best trade-off between computational cost and simulation quality for ensuing validations. Second, the performance of the new scheme is evaluated against observations at both monthly and daily timescales. The new RRS satisfactorily captures the seasonal variability of river discharge, although important biases stem from the water budget simulated by the ORCHIDEE model. The results highlight that realistic streamflow simulations require accurate precipitation forcing data and a precise river catchment description over a wide range of scales, as permitted by the new RRS. Detailed analyses at the daily timescale show the promising performance of this high-resolution RRS with respect to replicating river flow variation at various frequencies. Furthermore, this RRS may also eventually be well adapted for further developments in the ORCHIDEE land surface model to assess anthropogenic impacts on river processes (e.g. damming for irrigation operation).

scholarly journals A Python-enhanced urban land surface model SuPy (SUEWS in Python, v2019.2): development, deployment and demonstration

2019 ◽  
Author(s):  
Ting Sun ◽  
Sue Grimmond
Keyword(s):  
Land Surface ◽  
Urban Climate ◽  
Land Surface Model ◽  
Urban Land ◽  
Surface Model ◽  
Climate Modelling ◽  
Climate Services ◽  
Mass Fluxes ◽  
Online Tutorials ◽  
Urban Energy

Abstract. Accurate and agile modelling of the climate of cities is essential for urban climate services. The Surface Urban Energy and Water balance Scheme (SUEWS) is a state-of-the-art, widely used, urban land surface model (ULSM) which simulates urban-atmospheric interactions by quantifying the energy, water and mass fluxes. Using SUEWS as the computation kernel, SuPy (SUEWS in Python), stands on the Python-based data stack to streamline the pre-processing, computation and post-processing that are involved in the common modelling-centred urban climate studies. This paper documents the development of SuPy, which includes the SUEWS interface modification, F2PY (Fortran to Python) configuration and Python frontend implementation. In addition, the deployment of SuPy via PyPI (Python Package Index) is introduced along with the automated workflow for cross-platform compilation. This makes SuPy available for all mainstream operating systems (Windows, Linux, and macOS). Furthermore, three online tutorials in Jupyter notebooks are provided to users of different levels to become familiar with SuPy urban climate modelling. The SuPy package represents a significant enhancement that supports existing and new model applications, reproducibility, and enhanced functionality.

Sign in / Sign up

Export Citation Format

Share Document