scholarly journals GEOMETRY AND INFORMATION FOR THE PRESERVATION OF A ROMAN MOSAIC THROUGH A HBIM APPROACH

2021 ◽  
Vol VIII-M-1-2021 ◽  
pp. 73-79
Author(s):  
D. Del Pozzo ◽  
B. Scala ◽  
A. Adami
Keyword(s):  
Building Information Modeling ◽  
Archaeological Site ◽  
Good Health ◽  
Interesting Case ◽  
Information Modeling ◽  
Design Phase ◽  
Historical Building ◽  
Roof Structure ◽  
Building Information ◽  
The Cost

Abstract. The archaeological site is a mine of data and information that helps to deepen the knowledge of its origin, history, and structure. This virtuous approach becomes even more effective when these data, properly processed and structured, form the basis for a project of conservation and enhancement of the cultural asset.The Roman mosaics dug in Castiglione delle Stiviere in 1995 represent an interesting case in which all the archaeological information, made available by the Superintendence, was used through an HBIM (Historical Building Information Modeling) approach for the conservation project. The Stratigraphic Units (US) of the findings have identified the strategy for the geometric and informative modeling of the BIM (Building Information Modeling) model and have also been exploited in the design phase for the project of the new roof structure and especially for the cost analysis. The structuring of the data by stratigraphic units was also used in the drafting of the preventive and planned conservation, necessary to enhance and prolong the state of good health of the property.This work has been developed in the internship activity within a training course on HBIM, in collaboration with the Diocese of Mantua, owner of the property.

An Assessment of the Accuracy of Cost Estimation Using Building Information Modeling in Design Process

2013 ◽  
Vol 291-294 ◽  
pp. 2822-2825 ◽  
Author(s):  
Gwang Hee Kim ◽  
Hyun Young Park ◽  
Jae Min Shin
Keyword(s):  
Design Process ◽  
Cost Estimation ◽  
Building Information Modeling ◽  
Information Modeling ◽  
Design Phase ◽  
Cost Estimating ◽  
Construction Market ◽  
Building Information ◽  
Causes Of Errors ◽  
The Cost

The completion of the design drawing has not been credited in the construction market in Korea, and the modeling information of the design phase cannot be effectively used in an estimation process. Therefore, the objective of this study is to assess the cost estimating accuracy of a BIM tool in the design process to verify its applicability. Modeling was done for a building in an actual project to evaluate the applicability, from which the causes of errors of quantity take-off were derived.

scholarly journals BIM-Integrated Collaborative Robotics for Application in Building Construction and Maintenance

Robotics ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 2
Author(s):  
Camilla Follini ◽  
Valerio Magnago ◽  
Kilian Freitag ◽  
Michael Terzer ◽  
Carmen Marcher ◽  
...  
Keyword(s):  
Semantic Information ◽  
Building Information Modeling ◽  
A Priori ◽  
Building Construction ◽  
Information Modeling ◽  
Robotic Systems ◽  
Design Phase ◽  
Collaborative Robotics ◽  
Semantic Data ◽  
Building Information

The application of robotics in construction is hindered by the site environment, which is unstructured and subject to change. At the same time, however, buildings and corresponding sites can be accurately described by Building Information Modeling (BIM). Such a model contains geometric and semantic data about the construction and operation phases of the building and it is already available at the design phase. We propose a method to leverage BIM for simple yet efficient deployment of robotic systems for construction and operation of buildings. With our proposed approach, BIM is used to provide the robot with a priori geometric and semantic information on the environment and to store information on the operation progress. We present two applications that verify the effectiveness of our proposed method. This system represents a step forward towards an easier application of robots in construction.

scholarly journals Hybrid processing of laser scanning data

2018 ◽  
Vol 33 ◽  
pp. 01047 ◽  
Author(s):  
Vladimir Badenko ◽  
Dmitry Zotov ◽  
Alexander Fedotov
Keyword(s):  
Laser Scanning ◽  
Building Information Modeling ◽  
Information Modeling ◽  
Historical Buildings ◽  
Historical Building ◽  
Historic Building ◽  
Technology Application ◽  
Hybrid Technology ◽  
Building Information

In this article the analysis of gaps in processing of raw laser scanning data and results of bridging the gaps discovered on the base of usage of laser scanning data for historic building information modeling is presented. The results of the development of a unified hybrid technology for the processing, storage, access and visualization of combined laser scanning and photography data about historical buildings are analyzed. The first result of the technology application for the historical building of St. Petersburg Polytechnic University shows reliability of the proposed approaches.

scholarly journals An overview of the Necessities, Challenges & Outcomes of Building Information Modeling (BIM) Framework used in Project Management

2020 ◽  
Vol 6 (3) ◽  
pp. 873-883
Author(s):  
Shahid Iqbal ◽  
Muhammad Saad ◽  
Masab -Bin -Shahid ◽  
Wajeeha Batool
Keyword(s):  
Developing Countries ◽  
Life Cycle ◽  
Project Management ◽  
Research Study ◽  
Building Information Modeling ◽  
Effective Communication ◽  
Information Modeling ◽  
Management Support ◽  
Building Information ◽  
The Cost

Building Information Modeling (BIM) is gaining attention worldwide due to its assistances during the entire building’s construction life cycle covering all phases of project from commencement to accomplishment. BIM integrates different disciplines by effective communication, analyzes the project systems for constructability, estimates the cost and time of projects at any time using quantity takeoffs. Notwithstanding that fact Pakistan like other developing countries is lagging in Building Information Modeling (BIM) adoption. To facilitate the adoption of Building Information Modeling (BIM) in the AEC industry, the purpose of this research study is to identify the important factors for BIM adoption among construction engineers of Pakistan to carry out the awareness. It is found statistically that Building Information Modeling (BIM) capability is most important factors for the adoption of BIM among the construction engineers in Pakistan having the factors of motivation and management support which positively effect on BIM adoption in Pakistan. The trainings are very important to increase the BIM adoption in the industry.

scholarly journals Unbundling Transaction Cost Components in Building Information Modeling Adoption Procurement

2019 ◽  
Vol 8 (2S9) ◽  
pp. 333-338
Keyword(s):  
Transaction Costs ◽  
Transaction Cost ◽  
Building Information Modeling ◽  
Transaction Cost Economics ◽  
Project Performance ◽  
Information Modeling ◽  
Construction Disputes ◽  
Building Information ◽  
The Cost ◽  
Cost Components

Building information modeling (BIM) adoption is an emerging trend in Malaysian construction industry. BIM is expected to bring better project performance and address the various construction dilemmas stemmed from construction disputes. Construction disputes has been associated with high transaction costs, which subsequently increase overall project costs. Hence, BIM has been adopted in project procurement to address construction disputes for better project performance. Studying the transaction costs in BIM adoption procurement is deemed beneficial particularly when the ambiguity of a project performance is high. This is especially true when the number of projects adopting BIM is still comparatively small to ascertain the benefits of BIM. Transaction cost economics (TCE) is a theory and methodology for relatively evaluating the cost-effectiveness of institutional arrangements in managing transaction, and therefore, studying TCE in BIM adoption procurement can be beneficial. Such an effort can improve the understanding of the benefits of the transactions made. Previous research has managed to conclude that the traditional procurement resulted in higher transaction costs compared to the design-and-build procurement. Hence, this study attempts to identify the transaction costs in BIM adoption procurement. A systematic literature review was performed to investigate the TCE in procurement to profile the transaction costs and its components in BIM adoption procurement. The outcome of the systematic structured literature is a conceptual framework combining the “RIBA Plan of Work with BIM Overlay” developed by RICS with a refined transaction cost components categorisation. The framework is further classified into pre-contract and post-contract transaction cost components specifying the fixed and variable components, and either visible or hidden. It is believed that the unbundling of the components of transaction cost in BIM adoption procurement could provide a solid foundation in developing a guideline for industry players to better understand, apply, and manage BIM adoption procurement

Sign in / Sign up

Export Citation Format

Share Document