scholarly journals COMPARING THE ACCURACY OF GNSS POSITIONING VARIANTS FOR UAV BASED 3D MAP GENERATION

2020 ◽  
Vol XLIII-B1-2020 ◽  
pp. 443-449
Author(s):  
H. Haddadi Amlashi ◽  
F. Samadzadegan ◽  
F. Dadrass Javan ◽  
M. Savadkouhi
Keyword(s):  
Global Navigation Satellite System ◽  
Satellite System ◽  
Open Pit ◽  
Navigation Satellite ◽  
Navigation Systems ◽  
Positioning Systems ◽  
Satellite Systems ◽  
Gnss Receivers ◽  
Global Navigation ◽  
Global Navigation Satellite

Abstract. GNSS stands for Global Navigation Satellite System and is the standard generic term for satellite navigation systems that provide autonomous geo-spatial positioning with global coverage. The advantage of having access to multiple satellites is accuracy, redundancy, and availability at all the times. Though satellite systems do not often fail, if one fails GNSS receivers can pick up signals from other systems. If the line of sight is obstructed, having access to multiple satellites is also a benefit. GPS (Global Positioning System, USA), GLONASS (Global Navigation Satellite System, Russia), BeiDou (Compass, China), and some regional systems are positioning systems that are usually used. In recent years with the development of the UAVs and GNSS receivers, it is possible to manage an accurate PPK (Post Processing Kinematic) networks with a GNSS receiver mounted on a UAV to achieve the position of images principal points WGS1984 and to reduce the need for GCPs. But the most important challenge in a PPK task is, which a combination of different GNSS constellations would result in the most accurate computed position in checkpoints. For this purpose, this study focused on a PPK equipped UAV to map an open pit (Golgohar mine near Sirjan city). For the purpose, different combination of GPS, GLONASS and BeiDou used for position computed. Results are plotted and compared and found out having access to multiple constellations while doing a PPK task would bring higher accuracies in building photogrammetric models although it may cause some random error due to the higher values of noise while the number of the satellites increases.

Aircraft positioning using GPS/GLONASS code observations

2019 ◽  
Vol 92 (2) ◽  
pp. 163-171 ◽  
Author(s):  
Kamil Krasuski ◽  
Janusz Cwiklak ◽  
Marek Grzegorzewski
Keyword(s):  
Global Navigation Satellite System ◽  
Single Point ◽  
Satellite System ◽  
Least Square ◽  
Navigation Satellite ◽  
Navigation Systems ◽  
Protection Level ◽  
Content Type ◽  
Global Navigation ◽  
Global Navigation Satellite

Purpose This paper aims to present the problem of the integration of the global positioning system (GPS)/global navigation satellite system (GLONASS) data for the processing of aircraft position determination. Design/methodology/approach The aircraft coordinates were obtained based on GPS and GLONASS code observations for the single point positioning (SPP) method. The numerical computations were executed in the aircraft positioning software (APS) package. The mathematical scheme of equation observation of the SPP method was solved using least square estimation in stochastic processing. In the research experiment, the raw global navigation satellite system data from the Topcon HiperPro onboard receiver were applied. Findings In the paper, the mean errors of an aircraft position from APS were under 3 m. In addition, the accuracy of aircraft positioning was better than 6 m. The integrity term for horizontal protection level and vertical protection level parameters in the flight test was below 16 m. Research limitations/implications The paper presents only the application of GPS/GLONASS observations in aviation, without satellite data from other navigation systems. Practical implications The presented research method can be used in an aircraft based augmentation system in Polish aviation. Social implications The paper is addressed to persons who work in aviation and air transport. Originality/value The paper presents the SPP method as a satellite technique for the recovery of an aircraft position in an aviation test.

scholarly journals Semi-tightly coupled integration of multi-GNSS PPP and S-VINS for precise positioning in GNSS-challenged environments

2021 ◽  
Vol 2 (1) ◽  
Author(s):  
Xingxing Li ◽  
Xuanbin Wang ◽  
Jianchi Liao ◽  
Xin Li ◽  
Shengyu Li ◽  
...  
Keyword(s):  
Global Navigation Satellite System ◽  
Inertial Navigation ◽  
Satellite System ◽  
Navigation Satellite ◽  
Navigation Systems ◽  
Tight Coupling ◽  
Positioning Accuracy ◽  
3D Positioning ◽  
Global Navigation ◽  
Global Navigation Satellite

AbstractBecause of its high-precision, low-cost and easy-operation, Precise Point Positioning (PPP) becomes a potential and attractive positioning technique that can be applied to self-driving cars and drones. However, the reliability and availability of PPP will be significantly degraded in the extremely difficult conditions where Global Navigation Satellite System (GNSS) signals are blocked frequently. Inertial Navigation System (INS) has been integrated with GNSS to ameliorate such situations in the last decades. Recently, the Visual-Inertial Navigation Systems (VINS) with favorable complementary characteristics is demonstrated to realize a more stable and accurate local position estimation than the INS-only. Nevertheless, the system still must rely on the global positions to eliminate the accumulated errors. In this contribution, we present a semi-tight coupling framework of multi-GNSS PPP and Stereo VINS (S-VINS), which achieves the bidirectional location transfer and sharing in two separate navigation systems. In our approach, the local positions, produced by S-VINS are integrated with multi-GNSS PPP through a graph-optimization based method. Furthermore, the accurate forecast positions with S-VINS are fed back to assist PPP in GNSS-challenged environments. The statistical analysis of a GNSS outage simulation test shows that the S-VINS mode can effectively suppress the degradation of positioning accuracy compared with the INS-only mode. We also carried out a vehicle-borne experiment collecting multi-sensor data in a GNSS-challenged environment. For the complex driving environment, the PPP positioning capability is significantly improved with the aiding of S-VINS. The 3D positioning accuracy is improved by 49.0% for Global Positioning System (GPS), 40.3% for GPS + GLOANSS (Global Navigation Satellite System), 45.6% for GPS + BDS (BeiDou navigation satellite System), and 51.2% for GPS + GLONASS + BDS. On this basis, the solution with the semi-tight coupling scheme of multi-GNSS PPP/S-VINS achieves the improvements of 41.8–60.6% in 3D positioning accuracy compared with the multi-GNSS PPP/INS solutions.

scholarly journals OutFin, a multi-device and multi-modal dataset for outdoor localization based on the fingerprinting approach

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Fahad Alhomayani ◽  
Mohammad H. Mahoor
Keyword(s):  
Global Navigation Satellite System ◽  
Urban Areas ◽  
Satellite System ◽  
Reference Points ◽  
Navigation Satellite ◽  
Data Types ◽  
Entry Barrier ◽  
Promising Alternative ◽  
Global Navigation ◽  
Global Navigation Satellite

AbstractIn recent years, fingerprint-based positioning has gained researchers’ attention since it is a promising alternative to the Global Navigation Satellite System and cellular network-based localization in urban areas. Despite this, the lack of publicly available datasets that researchers can use to develop, evaluate, and compare fingerprint-based positioning solutions constitutes a high entry barrier for studies. As an effort to overcome this barrier and foster new research efforts, this paper presents OutFin, a novel dataset of outdoor location fingerprints that were collected using two different smartphones. OutFin is comprised of diverse data types such as WiFi, Bluetooth, and cellular signal strengths, in addition to measurements from various sensors including the magnetometer, accelerometer, gyroscope, barometer, and ambient light sensor. The collection area spanned four dispersed sites with a total of 122 reference points. Each site is different in terms of its visibility to the Global Navigation Satellite System and reference points’ number, arrangement, and spacing. Before OutFin was made available to the public, several experiments were conducted to validate its technical quality.

Implementation of a Dual-Frequency GLONASS and GPS L1 C/A Software Receiver

2010 ◽  
Vol 63 (2) ◽  
pp. 269-287 ◽  
Author(s):  
S. Abbasian Nik ◽  
M. G. Petovello
Keyword(s):  
Global Navigation Satellite System ◽  
Critical Role ◽  
Satellite System ◽  
Navigation Satellite ◽  
Dual Frequency ◽  
Software Receiver ◽  
The Public ◽  
Global Navigation ◽  
Global Navigation Satellite

These days, Global Navigation Satellite System (GNSS) technology plays a critical role in positioning and navigation applications. Use of GNSS is becoming more of a need to the public. Therefore, much effort is needed to make the civilian part of the system more accurate, reliable and available, especially for the safety-of-life purposes. With the recent revitalization of Russian Global Navigation Satellite System (GLONASS), with a constellation of 20 satellites in August 2009 and the promise of 24 satellites by 2010, it is worthwhile concentrating on the GLONASS system as a method of GPS augmentation to achieve more reliable and accurate navigation solutions.

scholarly journals Computation Approach for Quantitative Dielectric Constant from Time Sequential Data Observed by CYGNSS Satellites

2021 ◽  
Vol 13 (11) ◽  
pp. 2032
Author(s):  
Junchan Lee ◽  
Sunil Bisnath ◽  
Regina S.K. Lee ◽  
Narin Gavili Kilane
Keyword(s):  
Dielectric Constant ◽  
Soil Moisture ◽  
Global Navigation Satellite System ◽  
Measurement Data ◽  
Satellite System ◽  
Computation Method ◽  
Navigation Satellite ◽  
Local Soil ◽  
Global Navigation ◽  
Global Navigation Satellite

This paper describes a computation method for obtaining dielectric constant using Global Navigation Satellite System reflectometry (GNSS-R) products. Dielectric constant is a crucial component in the soil moisture retrieval process using reflected GNSS signals. The reflectivity for circular polarized signals is combined with the dielectric constant equation that is used for radiometer observations. Data from the Cyclone Global Navigation Satellite System (CYGNSS) mission, an eight-nanosatellite constellation for GNSS-R, are used for computing dielectric constant. Data from the Soil Moisture Active Passive (SMAP) mission are used to measure the soil moisture through its radiometer, and they are considered as a reference to confirm the accuracy of the new dielectric constant calculation method. The analyzed locations have been chosen that correspond to sites used for the calibration and validation of the SMAP soil moisture product using in-situ measurement data. The retrieved results, especially in the case of a specular point around Yanco, Australia, show that the estimated results track closely to the soil moisture results, and the Root Mean Square Error (RMSE) in the estimated dielectric constant is approximately 5.73. Similar results can be obtained when the specular point is located near the Texas Soil Moisture Network (TxSON), USA. These results indicate that the analysis procedure is well-defined, and it lays the foundation for obtaining quantitative soil moisture content using the GNSS reflectometry results. Future work will include applying the computation product to determine the characteristics that will allow for the separation of coherent and incoherent signals in delay Doppler maps, as well as to develop local soil moisture models.

Sign in / Sign up

Export Citation Format

Share Document