scholarly journals Evaluation of Partially Overlapping 3D Point Cloud's Registration by using ICP variant and CloudCompare.

2014 ◽  
Vol XL-8 ◽  
pp. 891-897 ◽  
Author(s):  
Y. D. Rajendra ◽  
S. C. Mehrotra ◽  
K. V. Kale ◽  
R. R. Manza ◽  
R. K. Dhumal ◽  
...  
Keyword(s):  
Point Cloud ◽  
Point Clouds ◽  
Large Object ◽  
Point Cloud Registration ◽  
Icp Algorithm ◽  
Cloud Data ◽  
Registration Process ◽  
Heritage Site ◽  
Laser Scanners ◽  
Dense Point

Terrestrial Laser Scanners (TLS) are used to get dense point samples of large object’s surface. TLS is new and efficient method to digitize large object or scene. The collected point samples come into different formats and coordinates. Different scans are required to scan large object such as heritage site. Point cloud registration is considered as important task to bring different scans into whole 3D model in one coordinate system. Point clouds can be registered by using one of the three ways or combination of them, Target based, feature extraction, point cloud based. For the present study we have gone through Point Cloud Based registration approach. We have collected partially overlapped 3D Point Cloud data of Department of Computer Science & IT (DCSIT) building located in Dr. Babasaheb Ambedkar Marathwada University, Aurangabad. To get the complete point cloud information of the building we have taken 12 scans, 4 scans for exterior and 8 scans for interior façade data collection. There are various algorithms available in literature, but Iterative Closest Point (ICP) is most dominant algorithms. The various researchers have developed variants of ICP for better registration process. The ICP point cloud registration algorithm is based on the search of pairs of nearest points in a two adjacent scans and calculates the transformation parameters between them, it provides advantage that no artificial target is required for registration process. We studied and implemented three variants Brute Force, KDTree, Partial Matching of ICP algorithm in MATLAB. The result shows that the implemented version of ICP algorithm with its variants gives better result with speed and accuracy of registration as compared with CloudCompare Open Source software.

scholarly journals 3-D Point Cloud Registration Using Convolutional Neural Networks

2019 ◽  
Vol 9 (16) ◽  
pp. 3273 ◽  
Author(s):  
Wen-Chung Chang ◽  
Van-Toan Pham
Keyword(s):  
Pose Estimation ◽  
Point Cloud ◽  
Full Range ◽  
Point Clouds ◽  
Fixed Time ◽  
Training Data ◽  
Data Sets ◽  
Point Cloud Registration ◽  
Cloud Data ◽  
Model Point

This paper develops a registration architecture for the purpose of estimating relative pose including the rotation and the translation of an object in terms of a model in 3-D space based on 3-D point clouds captured by a 3-D camera. Particularly, this paper addresses the time-consuming problem of 3-D point cloud registration which is essential for the closed-loop industrial automated assembly systems that demand fixed time for accurate pose estimation. Firstly, two different descriptors are developed in order to extract coarse and detailed features of these point cloud data sets for the purpose of creating training data sets according to diversified orientations. Secondly, in order to guarantee fast pose estimation in fixed time, a seemingly novel registration architecture by employing two consecutive convolutional neural network (CNN) models is proposed. After training, the proposed CNN architecture can estimate the rotation between the model point cloud and a data point cloud, followed by the translation estimation based on computing average values. By covering a smaller range of uncertainty of the orientation compared with a full range of uncertainty covered by the first CNN model, the second CNN model can precisely estimate the orientation of the 3-D point cloud. Finally, the performance of the algorithm proposed in this paper has been validated by experiments in comparison with baseline methods. Based on these results, the proposed algorithm significantly reduces the estimation time while maintaining high precision.

The Advantages of Using Laser Scanners in Surveying in Protected Sites

2015 ◽  
pp. 382-402
Author(s):  
Gülhan Benli
Keyword(s):  
Protected Areas ◽  
Point Cloud ◽  
Laser Scanning ◽  
Three Dimensional ◽  
Terrestrial Laser Scanning ◽  
Point Clouds ◽  
Point Cloud Data ◽  
Cloud Data ◽  
Laser Scanners ◽  
Point Data

Since the 2000s, terrestrial laser scanning, as one of the methods used to document historical edifices in protected areas, has taken on greater importance because it mitigates the difficulties associated with working on large areas and saves time while also making it possible to better understand all the particularities of the area. Through this technology, comprehensive point data (point clouds) about the surface of an object can be generated in a highly accurate three-dimensional manner. Furthermore, with the proper software this three-dimensional point cloud data can be transformed into three-dimensional rendering/mapping/modeling and quantitative orthophotographs. In this chapter, the study will present the results of terrestrial laser scanning and surveying which was used to obtain three-dimensional point clouds through three-dimensional survey measurements and scans of silhouettes of streets in Fatih in Historic Peninsula in Istanbul, which were then transposed into survey images and drawings. The study will also cite examples of the facade mapping using terrestrial laser scanning data in Istanbul Historic Peninsula Project.

scholarly journals An Experimental Study of a New Keypoint Matching Algorithm for Automatic Point Cloud Registration

2021 ◽  
Vol 10 (4) ◽  
pp. 204
Author(s):  
Ramazan Alper Kuçak ◽  
Serdar Erol ◽  
Bihter Erol
Keyword(s):  
Point Cloud ◽  
Point Clouds ◽  
Data Systems ◽  
Icp Algorithm ◽  
Matching Algorithm ◽  
Suggested Algorithm ◽  
Registration Process ◽  
Building Facade ◽  
Coarse Registration ◽  
Fine Registration

Light detection and ranging (LiDAR) data systems mounted on a moving or stationary platform provide 3D point cloud data for various purposes. In applications where the interested area or object needs to be measured twice or more with a shift, precise registration of the obtained point clouds is crucial for generating a healthy model with the combination of the overlapped point clouds. Automatic registration of the point clouds in the common coordinate system using the iterative closest point (ICP) algorithm or its variants is one of the frequently applied methods in the literature, and a number of studies focus on improving the registration process algorithms for achieving better results. This study proposed and tested a different approach for automatic keypoint detecting and matching in coarse registration of the point clouds before fine registration using the ICP algorithm. In the suggested algorithm, the keypoints were matched considering their geometrical relations expressed by means of the angles and distances among them. Hence, contributing the quality improvement of the 3D model obtained through the fine registration process, which is carried out using the ICP method, was our aim. The performance of the new algorithm was assessed using the root mean square error (RMSE) of the 3D transformation in the rough alignment stage as well as a-prior and a-posterior RMSE values of the ICP algorithm. The new algorithm was also compared with the point feature histogram (PFH) descriptor and matching algorithm, accompanying two commonly used detectors. In result of the comparisons, the superiorities and disadvantages of the suggested algorithm were discussed. The measurements for the datasets employed in the experiments were carried out using scanned data of a 6 cm × 6 cm × 10 cm Aristotle sculpture in the laboratory environment, and a building facade in the outdoor as well as using the publically available Stanford bunny sculpture data. In each case study, the proposed algorithm provided satisfying performance with superior accuracy and less iteration number in the ICP process compared to the other coarse registration methods. From the point clouds where coarse registration has been made with the proposed method, the fine registration accuracies in terms of RMSE values with ICP iterations are calculated as ~0.29 cm for Aristotle and Stanford bunny sculptures, ~2.0 cm for the building facade, respectively.

scholarly journals Ground-distance segmentation of 3D LiDAR point cloud toward autonomous driving

2020 ◽  
Vol 9 ◽  
Author(s):  
Jian Wu ◽  
Qingxiong Yang
Keyword(s):  
Point Cloud ◽  
Large Scale ◽  
Ground Plane ◽  
Semantic Segmentation ◽  
Point Clouds ◽  
Autonomous Driving ◽  
Urban Environments ◽  
Cloud Data ◽  
Dense Point ◽  
3D Lidar

In this paper, we study the semantic segmentation of 3D LiDAR point cloud data in urban environments for autonomous driving, and a method utilizing the surface information of the ground plane was proposed. In practice, the resolution of a LiDAR sensor installed in a self-driving vehicle is relatively low and thus the acquired point cloud is indeed quite sparse. While recent work on dense point cloud segmentation has achieved promising results, the performance is relatively low when directly applied to sparse point clouds. This paper is focusing on semantic segmentation of the sparse point clouds obtained from 32-channel LiDAR sensor with deep neural networks. The main contribution is the integration of the ground information which is used to group ground points far away from each other. Qualitative and quantitative experiments on two large-scale point cloud datasets show that the proposed method outperforms the current state-of-the-art.

scholarly journals Identification of stable areas in unreferenced laser scans for automated geomorphometric monitoring

2018 ◽  
Vol 6 (2) ◽  
pp. 303-317 ◽  
Author(s):  
Daniel Wujanz ◽  
Michael Avian ◽  
Daniel Krueger ◽  
Frank Neitzel
Keyword(s):  
Point Cloud ◽  
Region Of Interest ◽  
Point Clouds ◽  
Deformation Monitoring ◽  
Cloud Data ◽  
Laser Scanners ◽  
Research Questions ◽  
Iterative Closest Point Algorithm ◽  
The Impact

Abstract. Current research questions in the field of geomorphology focus on the impact of climate change on several processes subsequently causing natural hazards. Geodetic deformation measurements are a suitable tool to document such geomorphic mechanisms, e.g. by capturing a region of interest with terrestrial laser scanners which results in a so-called 3-D point cloud. The main problem in deformation monitoring is the transformation of 3-D point clouds captured at different points in time (epochs) into a stable reference coordinate system. In this contribution, a surface-based registration methodology is applied, termed the iterative closest proximity algorithm (ICProx), that solely uses point cloud data as input, similar to the iterative closest point algorithm (ICP). The aim of this study is to automatically classify deformations that occurred at a rock glacier and an ice glacier, as well as in a rockfall area. For every case study, two epochs were processed, while the datasets notably differ in terms of geometric characteristics, distribution and magnitude of deformation. In summary, the ICProx algorithm's classification accuracy is 70 % on average in comparison to reference data.

scholarly journals Planning with Learned Dynamic Model for Unsupervised Point Cloud Registration

2021 ◽  
Author(s):  
Haobo Jiang ◽  
Jianjun Qian ◽  
Jin Xie ◽  
Jian Yang
Keyword(s):  
Dynamic Model ◽  
Point Cloud ◽  
Fundamental Problem ◽  
Point Clouds ◽  
Search Space ◽  
Target Point ◽  
Planning Problem ◽  
Point Cloud Registration ◽  
Registration Process ◽  
Cross Entropy Method

Point cloud registration is a fundamental problem in 3D computer vision. In this paper, we cast point cloud registration into a planning problem in reinforcement learning, which can seek the transformation between the source and target point clouds through trial and error. By modeling the point cloud registration process as a Markov decision process (MDP), we develop a latent dynamic model of point clouds, consisting of a transformation network and evaluation network. The transformation network aims to predict the new transformed feature of the point cloud after performing a rigid transformation (i.e., action) on it while the evaluation network aims to predict the alignment precision between the transformed source point cloud and target point cloud as the reward signal. Once the dynamic model of the point cloud is trained, we employ the cross-entropy method (CEM) to iteratively update the planning policy by maximizing the rewards in the point cloud registration process. Thus, the optimal policy, i.e., the transformation between the source and target point clouds, can be obtained via gradually narrowing the search space of the transformation. Experimental results on ModelNet40 and 7Scene benchmark datasets demonstrate that our method can yield good registration performance in an unsupervised manner.

Poisson Mesh Reconstruction for Accurate Object Tracking With Low-Fidelity Point Clouds

2016 ◽  
Vol 17 (1) ◽  
Author(s):  
Timothy Garrett ◽  
Saverio Debernardis ◽  
James Oliver ◽  
Rafael Radkowski
Keyword(s):  
Object Tracking ◽  
Point Cloud ◽  
Point Clouds ◽  
Point Cloud Data ◽  
Reconstruction Algorithms ◽  
Icp Algorithm ◽  
Cloud Data ◽  
Reconstruction Operator ◽  
Position And Orientation ◽  
Mesh Reconstruction

Tracking refers to a set of techniques that allows one to calculate the position and orientation of an object with respect to a global reference coordinate system in real time. A common method for tracking with point clouds is the iterative closest point (ICP) algorithm, which relies on the continuous matching of sequential sampled point clouds with a reference point cloud. Modern commodity range cameras provide point cloud data that can be used for that purpose. However, this point cloud data is generally considered as low-fidelity and insufficient for accurate object tracking. Mesh reconstruction algorithms can improve the fidelity of the point cloud by reconstructing the overall shape of the object. This paper explores the potential for point cloud fidelity improvement via the Poisson mesh reconstruction (PMR) algorithm and compares the accuracy with a common ICP-based tracking technique and a local mesh reconstruction operator. The results of an offline simulation are promising.

scholarly journals Application of SFM and laser scanning technology to the description of mosaics piece by piece

2014 ◽  
Vol XL-5 ◽  
pp. 23-28 ◽  
Author(s):  
O. Ajioka ◽  
Y. Hori
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Laser Scanner ◽  
Ccd Camera ◽  
3D Models ◽  
Point Cloud Data ◽  
Wall Paintings ◽  
Cloud Data ◽  
Laser Scanners ◽  
Dense Point

Mosaic floors of surviving buildings in Ostia have been mainly recorded in photographs. From 2008, Japanese research group carries out a project of 3d measuring of the whole structure of ancient Roman city Ostia using laser scanners, including its landscape, city blocks, streets, buildings, wall paintings and mosaics. The laser scanner allows for a more detailed analysis and a greater potential for recording mosaics. We can record the data of mosaics, which are described piece by piece. However it is hard to acquire enough high dense point cloud and the internal camera of the laser scanner produce low quality images. We introduce a possible technology of 3D recording of mosaics with high-quality colour information; SFM. The use of this technique permits us to create 3D models from images provided from a CCD camera without heavy and large laser scanners. We applied SFM system to different three types of the mosaics laid down on the floors of "the House of the Dioscuroi", "the Insula of the Muse" and "the House of Jove and Ganymede", and created high resolution orthographic images. Then we examined to compare these orthographic images with that are created from the point cloud data. As a result, we confirmed that SFM system has sufficient practical utility for the mosaic research. And we present how much of density of point cloud or ground resolution are required for the documentation of mosaics accurately.

scholarly journals Large Common Plansets-4-Points Congruent Sets for Point Cloud Registration

2020 ◽  
Vol 9 (11) ◽  
pp. 647
Author(s):  
Cedrique Fotsing ◽  
Nafissetou Nziengam ◽  
Christophe Bobda
Keyword(s):  
Execution Time ◽  
Point Cloud ◽  
Single Point ◽  
Point Clouds ◽  
Multiple Point ◽  
Global Alignment ◽  
Data Sets ◽  
Point Cloud Registration ◽  
Cloud Data ◽  
Local Plane

Point cloud registration combines multiple point cloud data sets collected from different positions using the same or different devices to form a single point cloud within a single coordinate system. Point cloud registration is usually achieved through spatial transformations that align and merge multiple point clouds into a single globally consistent model. In this paper, we present a new segmentation-based approach for point cloud registration. Our method consists of extracting plane structures from point clouds and then, using the 4-Point Congruent Sets (4PCS) technique, we estimate transformations that align the plane structures. Instead of a global alignment using all the points in the dataset, our method aligns 2-point clouds using their local plane structures. This considerably reduces the data size, computational workload, and execution time. Unlike conventional methods that seek to align the largest number of common points between entities, the new method aims to align the largest number of planes. Using partial point clouds of multiple real-world scenes, we demonstrate the superiority of our method compared to raw 4PCS in terms of quality of result (QoS) and execution time. Our method requires about half the execution time of 4PCS in all the tested datasets and produces better alignment of the point clouds.

Registration and Fusion of UAV LiDAR System Sequence Images and Laser Point Clouds

2020 ◽  
Author(s):  
Jiayong Yu ◽  
Longchen Ma ◽  
Maoyi Tian, ◽  
Xiushan Lu
Keyword(s):  
Point Cloud ◽  
Image Data ◽  
Point Clouds ◽  
Optical Image ◽  
Point Cloud Data ◽  
Feature Points ◽  
Lidar System ◽  
Registration Accuracy ◽  
Cloud Data ◽  
Intensity Image

The unmanned aerial vehicle (UAV)-mounted mobile LiDAR system (ULS) is widely used for geomatics owing to its efficient data acquisition and convenient operation. However, due to limited carrying capacity of a UAV, sensors integrated in the ULS should be small and lightweight, which results in decrease in the density of the collected scanning points. This affects registration between image data and point cloud data. To address this issue, the authors propose a method for registering and fusing ULS sequence images and laser point clouds, wherein they convert the problem of registering point cloud data and image data into a problem of matching feature points between the two images. First, a point cloud is selected to produce an intensity image. Subsequently, the corresponding feature points of the intensity image and the optical image are matched, and exterior orientation parameters are solved using a collinear equation based on image position and orientation. Finally, the sequence images are fused with the laser point cloud, based on the Global Navigation Satellite System (GNSS) time index of the optical image, to generate a true color point cloud. The experimental results show the higher registration accuracy and fusion speed of the proposed method, thereby demonstrating its accuracy and effectiveness.

Sign in / Sign up

Export Citation Format

Share Document