scholarly journals Groundwater pollution in the Mesta River terrace caused by Eleshnitsa tailings pond – current status

2021 ◽  
Vol 82 (3) ◽  
pp. 228-230
Author(s):  
Nikolay Stoyanov ◽  
Stefan Dimovski ◽  
Sava Kolev
Keyword(s):  
Three Dimensional ◽  
Current Status ◽  
Three Dimensional Model ◽  
Degree Of Contamination ◽  
Alluvial Deposits ◽  
Protective Measures ◽  
Quaternary Aquifer ◽  
Tailings Pond ◽  
Geophysical Surveys ◽  
Hydrochemical Studies

Even after the implementation of eco-protective measures, the Eleshnitsa tailings pond continues to contaminate the Quaternary aquifer, formed in the alluvial deposits of Mesta River. A three-dimensional model of mass transport of selected key pollutants is developed on the basis of hydrochemical studies, geophysical surveys, and processing and systematization of monitoring data. The spread and degree of contamination in the Quaternary aquifer are estimated.

scholarly journals From Lithological Modelling to Groundwater Modelling: A Case Study in the Tiber River Alluvial Valley

2021 ◽  
Author(s):  
Cristina Di Salvo ◽  
Marco Mancini ◽  
Massimiliano Moscatelli ◽  
Maurizio Simionato ◽  
Gian Paolo Cavinato ◽  
...  
Keyword(s):  
Three Dimensional ◽  
Stationary Regime ◽  
Regional Government ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Hydrogeological Model ◽  
Alluvial Deposits ◽  
Tiber River

This study presents the results of a research project financed by the Lazio Regional Government. The research focused on defining an integrated model of recent alluvial deposits in the Tiber River. To achieve this objective, geological boreholes were made to monitor the aquifer and in situ and laboratory tests carried out. The data obtained was used to detail stratigraphic aspects and improve the comprehension of water circulation beneath the recent alluvial deposits of the Tiber River in the urban area of Rome, between the Ponte Milvio bridge and the Tiber Island. The stratigraphic intervals recognised in the boreholes were parameterised based on their litho-technical characteristics. The new data acquired, and integrated with existing data in the CNR IGAG database, made it possible to produce a three-dimensional model of the lithologies in the study area.The model of the subsoil, simplified for applied reasons, was described in hy-drostratigraphic terms: three different lithotypes were subjected to piezometric levels monitor-ing. Finally, the research generated a numerical hydrological level in a stationary regime. In general, this study demonstrates how a numerical hydrogeological model calibrated by piezo-metric monitoring data can support the construction of a geological model, discarding or con-firming certain hypotheses and suggesting other means of reconstructing sedimentary bodies.

scholarly journals From Lithological Modelling to Groundwater Modelling: A Case Study in the Tiber River Alluvial Valley

Geosciences ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 507
Author(s):  
Cristina Di Salvo ◽  
Marco Mancini ◽  
Massimiliano Moscatelli ◽  
Maurizio Simionato ◽  
Gian Paolo Cavinato ◽  
...  
Keyword(s):  
Hydrological Model ◽  
Three Dimensional ◽  
National Research Council ◽  
Regional Government ◽  
Three Dimensional Model ◽  
Hydrogeological Model ◽  
Alluvial Deposits ◽  
Tiber River

This study presents the results of a research project financed by the Lazio Regional Government. The research focused on defining an integrated model of recent alluvial deposits in the Tiber River. To achieve this objective, geological boreholes were made to monitor the aquifer and in situ and laboratory tests were carried out. The data obtained were used to detail stratigraphic aspects and improve the comprehension of water circulation beneath the recent alluvial deposits of the Tiber River in the urban area of Rome, between the Ponte Milvio bridge and the Tiber Island. The stratigraphic intervals recognised in the boreholes were parameterised based on their litho-technical characteristics. The new data acquired, and integrated with existing data in the database of Institute of Environmental Geology and Geoengineering of the Italian National Research Council, made it possible to produce a three-dimensional model of the lithologies in the study area. The model of the subsoil, simplified for applied reasons, was described in hydrostratigraphic terms: three different lithotypes were subjected to piezometric levels monitoring. Finally, the research generated a numerical hydrological model in a steady state. In general, this study demonstrates how a numerical hydrogeological model calibrated by piezometric monitoring data can support the construction of a geological model, discarding or confirming certain hypotheses and suggesting other means of reconstructing sedimentary bodies.

Three-Dimensional Model for Virtual Surgical Simulation, during Complex Skull Base Surgery and Aneurysm Surgery

Skull Base ◽  
2008 ◽  
Vol 18 (S 01) ◽  
Author(s):  
Akio Morita ◽  
Toshikazu Kimura ◽  
Shigeo Sora ◽  
Kengo Nishimura ◽  
Hisayuki Sugiyama ◽  
...  
Keyword(s):  
Skull Base ◽  
Surgical Simulation ◽  
Skull Base Surgery ◽  
Three Dimensional ◽  
Aneurysm Surgery ◽  
Dimensional Model ◽  
Three Dimensional Model

Digitalization system of ancient architecture decoration art based on neural network and image features

2020 ◽  
pp. 1-12
Author(s):  
Wu Xin ◽  
Qiu Daping
Keyword(s):  
Neural Network ◽  
Construction Industry ◽  
Three Dimensional ◽  
Performance Testing ◽  
Image Features ◽  
Three Dimensional Model ◽  
Performance Effect ◽  
Data Process ◽  
And Performance ◽  
Construction Mode

The inheritance and innovation of ancient architecture decoration art is an important way for the development of the construction industry. The data process of traditional ancient architecture decoration art is relatively backward, which leads to the obvious distortion of the digitalization of ancient architecture decoration art. In order to improve the digital effect of ancient architecture decoration art, based on neural network, this paper combines the image features to construct a neural network-based ancient architecture decoration art data system model, and graphically expresses the static construction mode and dynamic construction process of the architecture group. Based on this, three-dimensional model reconstruction and scene simulation experiments of architecture groups are realized. In order to verify the performance effect of the system proposed in this paper, it is verified through simulation and performance testing, and data visualization is performed through statistical methods. The result of the study shows that the digitalization effect of the ancient architecture decoration art proposed in this paper is good.

Phonetic iconicity in the evaluative morphology of a sample of Indo-European, Niger-Congo and Austronesian languages

2010 ◽  
Vol 3 (2) ◽  
pp. 156-180 ◽  
Author(s):  
Renáta Gregová ◽  
Lívia Körtvélyessy ◽  
Július Zimmermann
Keyword(s):  
Three Dimensional ◽  
Sound Symbolism ◽  
Three Dimensional Model ◽  
Austronesian Languages ◽  
Place Of Articulation ◽  
European Languages ◽  
Phonetic Symbolism ◽  
The Individual ◽  
Core Vocabulary

Universals Archive (Universal #1926) indicates a universal tendency for sound symbolism in reference to the expression of diminutives and augmentatives. The research ( Štekauer et al. 2009 ) carried out on European languages has not proved the tendency at all. Therefore, our research was extended to cover three language families – Indo-European, Niger-Congo and Austronesian. A three-step analysis examining different aspects of phonetic symbolism was carried out on a core vocabulary of 35 lexical items. A research sample was selected out of 60 languages. The evaluative markers were analyzed according to both phonetic classification of vowels and consonants and Ultan's and Niewenhuis' conclusions on the dominance of palatal and post-alveolar consonants in diminutive markers. Finally, the data obtained in our sample languages was evaluated by means of a three-dimensional model illustrating the place of articulation of the individual segments.

3D reconstruction and calculation of surface area and volume of bell pepper

2007 ◽  
Vol 3 (1) ◽  
pp. 89-113
Author(s):  
Zoltán Gillay ◽  
László Fenyvesi
Keyword(s):  
3D Reconstruction ◽  
Surface Area ◽  
Three Dimensional ◽  
Reference Method ◽  
Bell Pepper ◽  
Three Dimensional Model ◽  
Acceptable Error ◽  
Volume Calculation ◽  
Bell Peppers ◽  
Area And Volume

There was a method developed that generates the three-dimensional model of not axisymmetric produce, based on an arbitrary number of photos. The model can serve as a basis for calculating the surface area and the volume of produce. The efficiency of the reconstruction was tested on bell peppers and artificial shapes. In case of bell peppers 3-dimensional reconstruction was created from 4 images rotated in 45° angle intervals. The surface area and the volume were estimated on the basis of the reconstructed area. Furthermore, a new and simple reference method was devised to give precise results for the surface area of bell pepper. The results show that this 3D reconstruction-based surface area and volume calculation method is suitable to determine the surface area and volume of definite bell peppers with an acceptable error.

Sign in / Sign up

Export Citation Format

Share Document