scholarly journals Agar Extraction, Physical Properties, FTIR Analysis and Biochemical Composition of Three Edible Species of Red Seaweeds Gracilaria corticata (J. Agardh), Gracilaria dentata (J. Agardh) and Gracilariopsis longissima (S. G. Gmelin)........

2021 ◽  
Vol 64 (3) ◽  
pp. 263-273
Author(s):  
Rashida Qari ◽  
Saima Haider

Three species of red algae Gracilaria corticata (J. Agardh), Gracilaria dentata (J. Agardh) and Gracilariopsis longissima (S.G. Gmelin), Steentoft, L. M; Irvine and Farnham (formerly Gracilaria verrucosa (Hudson) were collected from four different sites (Buleji, Hawks Bay, Manora and Paradise Point) of Karachi coast. The G. corticata was the dominant species and the highest yield of agar was compared to other studied species. The physical properties such as gel temperature, melting temperature, density, viscosity and gel strength showed large variations. Interestingly, the gel temperature, melting temperature, density, and gel strength had the highest value in G. corticata samples collected, while gel viscosity recorded the highest value in G. dentata samples. Intensive spectroscopic FTIR analysis was determined in all three species of G. corticata, G. dentata and G. longissima. The bands at 414.7/cm to 3917.2/cm represents stretching and bending vibrations of alcohol O-H, amine N-H, alkane C-H, alkyne C=C, nitriles C=N, carboxyl C=O, nitro aromatic N=O, alkane C-C, nitro methane C-N, aliphatic amines C-N, sulfoxides S=O, alkene C-H alkyl halide C-Cl, C-I groups. The ash content of all studied species (G. corticata, G. dentata and G. longissima) was in the range of 20-30%, while the carbohydrate content was in the range of 22-24%. The results of this study suggested the utilization of our natural resources present in Karachi coast. This could be achieved by determining the quantity and quality of agar in the edible species of Gracilaria/Gracilariopsis.  

Alloy Digest ◽  
1981 ◽  
Vol 30 (5) ◽  

Abstract INDALLOY 136 is a bismuth-base, eutectic alloy that melts at 136 F (57.8 C). It is used widely in industry because of its low melting temperature and controlled-shrinkage characteristics. It provides the scientist, engineer and technician with an easily castable material that is ready for use soon after it freezes. The alloy can be recovered easily and recycled into new uses any number of times. Among its uses are anchoring parts for machining, proof casting and low-melting solder. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Bi-24. Producer or source: Indium Corporation of America.


Alloy Digest ◽  
1979 ◽  
Vol 28 (9) ◽  

Abstract CERROLOW-136 Alloy is a bismuth-base eutectic alloy that melts at 136 F (57.8 C), hence its identifying number. It is widely used in industry because of its low melting temperature and controlled-shrinkage characteristics. Among tis many applications are (1) Anchoring parts such as jet blades for machining, testing and inspection, (2) In the foundry for fusible cores in compound cores and (3) Low-melting solder. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Bi-13. Producer or source: Cerro Metal Products.


Alloy Digest ◽  
1978 ◽  
Vol 27 (10) ◽  

Abstract CERROLOW-117 Alloy is a bismuth-base eutectic alloy that melts at 117 F (47 C). Its low melting temperature and controlled-shrinkage characteristics make it very useful in industry for such applications as proof casting in tool and die shops, dental models and low-temperature solder. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, forming, heat treating, and machining. Filing Code: Bi-8. Producer or source: Cerro Metal Products.


2002 ◽  
Vol 33 (4) ◽  
pp. 285-295 ◽  
Author(s):  
ATSUKO IGARASHI ◽  
EKO ARAI ◽  
REIKO WATANABE ◽  
YOZO MIYAOKA ◽  
TAKAHIRO TAZAWA ◽  
...  

1931 ◽  
Vol 5 (3) ◽  
pp. 306-312 ◽  
Author(s):  
F. R. Morehouse ◽  
O. Maass

The method for preparing an alkyl acetylene by the action of an alkyl halide on sodium dissolved in liquid ammonia was modified in certain details. Ethyl and methyl acetylene were prepared and purified and their melting and boiling points determined. Vapor pressures, densities and surface tensions were measured over a considerable temperature range. These properties together with constants calculated from the data are compared with similar data for paraffins and olefines.


RSC Advances ◽  
2015 ◽  
Vol 5 (28) ◽  
pp. 22178-22187 ◽  
Author(s):  
Olga Stolarska ◽  
Ana Soto ◽  
Héctor Rodríguez ◽  
Marcin Smiglak

The composition and temperature of three eutectic mixtures of ionic liquids and their physical properties (density, viscosity, and surface tension) are presented. Melting temperature depressions of up to ca. 50 K were found with regard to those of the parent ionic liquids.


Alloy Digest ◽  
1981 ◽  
Vol 30 (9) ◽  

Abstract INDALLOY 117 is a bismuth-base, eutectic alloy that has a melting point of 117 F (47 C). Because of its low melting temperature and controlled-shrinkage characteristics, it is used widely in industry. The alloy can be recovered easily and recycled into new uses any number of times. Its many uses include low-temperature solder, proof casting, fusible elements in safety devices and model railroading. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Bi-26. Producer or source: Indium Corporation of America.


Alloy Digest ◽  
1981 ◽  
Vol 30 (1) ◽  

Abstract CERROLOW-147 Alloy is a bismuth-base non-eutectic alloy that melts over the narrow, low-temperature range of 142-149 F (61-65 C). It has a slightly lower melting temperature than CERROBEND Alloy (Alloy Digest Bi-6, August 1978) and functions about as well for the same uses if its small freezing range is not objectionable. Cerrolow-147 Alloy provides engineers and technicians with an easily castable material that is ready for use as soon as it freezes. It is highly suitable in industry for such uses as anchoring parts for machining and support for bending tubing and extrusions. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, forming, heat treating, and machining. Filing Code: Bi-21. Producer or source: Cerro Metal Products.


Sign in / Sign up

Export Citation Format

Share Document