scholarly journals Eco-Efficiency Applied to Dairy Processing: From Concept to Assessment

2018 ◽  
Vol 8 (1) ◽  
pp. 1 ◽  
Author(s):  
Scott Benoit ◽  
Manuele Margni ◽  
Christian Bouchard ◽  
Yves Pouliot
Keyword(s):  
Economic Growth ◽  
Life Cycle ◽  
Resource Use ◽  
Process Simulation ◽  
Simulation Tools ◽  
Dairy Processing ◽  
Life Cycle Perspective ◽  
Guidelines And Recommendations ◽  
Subsequent Addition ◽  
Over Time

Eco-efficiency is a concept which aims at decoupling economic growth from resource use and pollution. The objective of this paper is to review how the application of this concept to dairy processing has evolved over time. Following the introduction of the concept, guidelines and recommendations were introduced in the dairy sector. The absence of a lifecycle perspective and means of measuring improvement led to a subsequent addition of efficiency and intensity assessments. As restrictive regulations and comprehensive methodologies integrating the life-cycle perspective in eco-efficiency assessments were virtually non-existent, the ISO 14045 standard was developed. However, as of yet the dairy processing sector does not appear to have embraced the ISO methodology. Nonetheless, process simulation tools may help and could therefore contribute to the implementation of the eco-efficiency assessments in the dairy processing sector.

Resource use assessment of an agricultural system from a life cycle perspective – a dairy farm as case study

2015 ◽  
Vol 135 ◽  
pp. 77-89 ◽  
Author(s):  
Sophie Huysveld ◽  
Veerle Van linden ◽  
Steven De Meester ◽  
Nico Peiren ◽  
Hilde Muylle ◽  
...  
Keyword(s):  
Life Cycle ◽  
Resource Use ◽  
Dairy Farm ◽  
Agricultural System ◽  
Life Cycle Perspective

Uneven Decoupling

2019 ◽  
Vol 5 (4) ◽  
pp. 410-427 ◽  
Author(s):  
Ryan P. Thombs ◽  
Xiaorui Huang
Keyword(s):  
Economic Growth ◽  
Co2 Emissions ◽  
Ecological Modernization ◽  
Climate Mitigation ◽  
Data Limitations ◽  
Treadmill Of Production ◽  
Global North ◽  
Organization Of Production ◽  
Changes Over Time ◽  
Over Time

The macro-comparative decoupling literature has often sought to test the arguments made by the treadmill of production (TP) and ecological modernization (EM) theories. However, due to data limitations, these studies have been limited to analyzing the years after 1960. Given that both theories discuss historical processes operating before 1960, analyzing pre-1960 data is warranted to more comprehensively test the propositions made by both theories. We assess the long-term relationship between economic growth and CO2 emissions from 1870 to 2014 using a sample of global North nations. We use Prais-Winsten regression models with time interactions to assess whether, when, and how much CO2 emissions have decoupled from economic growth over time. We find that significant relative decoupling has occurred twice since 1870: during the last 30 years of the nineteenth century, the timing of which is contrary to what both the EM and TP theories might expect, and after 1970. We also observe that the relationship remained relatively stable from the turn of the twentieth century to approximately 1970, which aligns with the arguments made by the classical TP work. We conclude that shifts in the global organization of production have shaped the magnitude of the economic growth–CO2 emissions relationship and its changes over time, which has implications for climate mitigation policy.

Has Aid Helped in Pakistan?

1997 ◽  
Vol 36 (4II) ◽  
pp. 947-957 ◽  
Author(s):  
Shahrukh Rafi Khan
Keyword(s):  
Economic Growth ◽  
Negative Impact ◽  
Negative Association ◽  
Causal Impact ◽  
The Impact ◽  
Over Time

This paper has a two-fold objective: first, to examine the terms on which Pakistan receives aid and whether its debt situation is sustainable, and second, to examine the impact of aid and debt on economic growth. It is found that there is little encouraging that can be said about how the terms on which Pakistan has received aid over time have changed, and its current debt situation is not sustainable. Also reported is the analysis done elsewhere which shows that aid has a negative (Granger) causal impact on GDP, and aid has a robust negative impact on economic growth after controlling for supplyside shocks. We provide various reasons for this negative association.

Software-driven Security Attacks: From Vulnerability Sources to Durable Hardware Defenses

2021 ◽  
Vol 17 (3) ◽  
pp. 1-38
Author(s):  
Lauren Biernacki ◽  
Mark Gallagher ◽  
Zhixing Xu ◽  
Misiker Tadesse Aga ◽  
Austin Harris ◽  
...  
Keyword(s):  
Life Cycle ◽  
Case Studies ◽  
Gain Control ◽  
Illustrative Case ◽  
Security Attacks ◽  
Specific Point ◽  
Security Vulnerabilities ◽  
Significant Challenge ◽  
Hardware Realization ◽  
Over Time

There is an increasing body of work in the area of hardware defenses for software-driven security attacks. A significant challenge in developing these defenses is that the space of security vulnerabilities and exploits is large and not fully understood. This results in specific point defenses that aim to patch particular vulnerabilities. While these defenses are valuable, they are often blindsided by fresh attacks that exploit new vulnerabilities. This article aims to address this issue by suggesting ways to make future defenses more durable based on an organization of security vulnerabilities as they arise throughout the program life cycle. We classify these vulnerability sources through programming, compilation, and hardware realization, and we show how each source introduces unintended states and transitions into the implementation. Further, we show how security exploits gain control by moving the implementation to an unintended state using knowledge of these sources and how defenses work to prevent these transitions. This framework of analyzing vulnerability sources, exploits, and defenses provides insights into developing durable defenses that could defend against broader categories of exploits. We present illustrative case studies of four important attack genealogies—showing how they fit into the presented framework and how the sophistication of the exploits and defenses have evolved over time, providing us insights for the future.

scholarly journals Engineering Design Process of Face Masks Based on Circularity and Life Cycle Assessment in the Constraint of the COVID-19 Pandemic

2021 ◽  
Vol 13 (9) ◽  
pp. 4948
Author(s):  
Núria Boix Rodríguez ◽  
Giovanni Formentini ◽  
Claudio Favi ◽  
Marco Marconi
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Sustainability ◽  
Design Guidelines ◽  
New Device ◽  
Engineering Design Process ◽  
Life Cycle Perspective ◽  
Different Types ◽  
3D Printed ◽  
Negative Impacts

Face masks are currently considered key equipment to protect people against the COVID-19 pandemic. The demand for such devices is considerable, as is the amount of plastic waste generated after their use (approximately 1.6 million tons/day since the outbreak). Even if the sanitary emergency must have the maximum priority, environmental concerns require investigation to find possible mitigation solutions. The aim of this work is to develop an eco-design actions guide that supports the design of dedicated masks, in a manner to reduce the negative impacts of these devices on the environment during the pandemic period. Toward this aim, an environmental assessment based on life cycle assessment and circularity assessment (material circularity indicator) of different types of masks have been carried out on (i) a 3D-printed mask with changeable filters, (ii) a surgical mask, (iii) an FFP2 mask with valve, (iv) an FFP2 mask without valve, and (v) a washable mask. Results highlight how reusable masks (i.e., 3D-printed masks and washable masks) are the most sustainable from a life cycle perspective, drastically reducing the environmental impacts in all categories. The outcomes of the analysis provide a framework to derive a set of eco-design guidelines which have been used to design a new device that couples protection requirements against the virus and environmental sustainability.

scholarly journals Marine biomass for a circular blue‐green bioeconomy?: A life cycle perspective on closing nitrogen and phosphorus land‐marine loops

2021 ◽  
Author(s):  
Jean‐Baptiste E. Thomas ◽  
Rajib Sinha ◽  
Åsa Strand ◽  
Tore Söderqvist ◽  
Johanna Stadmark ◽  
...  
Keyword(s):  
Life Cycle ◽  
Nitrogen And Phosphorus ◽  
Life Cycle Perspective ◽  
Marine Biomass

scholarly journals Design of Consumables in a Resource-Efficient Economy—A Literature Review

2021 ◽  
Vol 13 (3) ◽  
pp. 1036
Author(s):  
Siri Willskytt
Keyword(s):  
Life Cycle ◽  
Literature Review ◽  
Product Design ◽  
Circular Economy ◽  
Design Guidelines ◽  
The Novel ◽  
Specific Design ◽  
Design Considerations ◽  
Life Cycle Perspective ◽  
General Product

Consumable products have received less attention in the circular economy (CE), particularly in regard to the design of resource-efficient products. This literature review investigates the extent to which existing design guidelines for resource-efficient products are applicable to consumables. This analysis is divided into two parts. The first investigates the extent to which general product-design guidelines (i.e., applicable to both durables and consumables) are applicable to consumables. This analysis also scrutinizes the type of recommendations presented by the ecodesign and circular product design, to investigate the novel aspects of the CE in product design. The second analysis examines the type of design considerations the literature on product-type specific design guidelines recommends for specific consumables and whether such guidelines are transferable. The analysis of general guidelines showed that, although guidelines are intended to be general and applicable to many types of products, their applicability to consumable products is limited. Less than half of their recommendations can be applied to consumables. The analysis also identified several design considerations that are transferable between product-specific design guidelines. This paper shows the importance of the life-cycle perspective in product design, to maximize the opportunities to improve consumables.

Hydrometallurgical recovery of neodymium from spent hard disk magnets: A life cycle perspective

2020 ◽  
pp. 125087
Author(s):  
Engin Karal ◽  
Mehmet Ali Kucuker ◽  
Burak Demirel ◽  
Nadim K. Copty ◽  
Kerstin Kuchta
Keyword(s):  
Life Cycle ◽  
Hard Disk ◽  
Life Cycle Perspective
Sign in / Sign up

Export Citation Format

Share Document