scholarly journals Evaluation of nitrogen (Urea) on Zea mays L. under Balkh province climate

2020 ◽  
Vol 3 (1) ◽  
pp. 6-9
Author(s):  
Nasratullah Habibi ◽  
Friba Sikandari
Keyword(s):  
Zea Mays ◽  
Nitrogen Fertilizer ◽  
Yield Components ◽  
Zea Mays L ◽  
Agricultural Research ◽  
Block Design ◽  
High Yield ◽  
Randomized Complete Block Design ◽  
Yield And Yield Components ◽  
Effect On Yield

An experiment was conducted to evaluate effect of urea fertilizer on yield and yield components of Zea mays L. Using Randomized Complete Block Design (RCBD) split plots in three replications in agricultural research farm of Balkh University by 2019. Doses of urea used in this experiment were 0, 80, 160 and 240 kg ha-1 , respectively. It has been found that amount of nitrogen fertilizer (urea) had significant effect on yield of maize at p<0.05. The higher level of nitrogen caused the higher grain yield, number of kernels per ear, the number of grains per ear row, ear diameter, cob length, grain per plant and plant height. As a result 7.76 ton ha-1 was recorded as high yield while 240 kg ha-1 urea was used, and 5.12 ton ha-1 was recorded as low yield in treatment one with 0 kg ha-1 of nitrogen fertilizer. Finally, as a result using 240 kg ha-1 nitrogen fertilizer is recommended.

scholarly journals Soybean yield and yield components affected by the mycorrhiza and bradyrhizobium at different rates of starter nitrogen fertilizer

2017 ◽  
Vol 38 (4Supl1) ◽  
pp. 2409
Author(s):  
Mohammad Ali Aboutalebian ◽  
Masoumeh Malmir
Keyword(s):  
Nitrogen Fertilizer ◽  
Yield Components ◽  
Agricultural Research ◽  
Block Design ◽  
Fertilizer Application ◽  
Mycorrhizal Symbiosis ◽  
Research Station ◽  
Yield And Yield Components ◽  
Biological Yield ◽  
Number Of Leaves

In order to study interaction between mycorrhiza and bradyrhizobium on yield of soybean under different amounts of starter nitrogen fertilizer, a field experiment was conducted at the agricultural research station, Bu-Ali Sina University in 2015 growing season. A factorial experiment based on randomized complete block design was arranged with three replications. Experiment factors covering three levels of starter nitrogen of 0, 30 and 60 kg ha-1, bradyrhizobiumin two level of inoculated and non-inoculated and mycorrhiza including application and non-application levels. Results indicated that plant height, number of leaves per plant, yield and yield components and biological yield and mycorrhizal symbiosis percent affected by interaction of studied factors significantly. Maximum number of pod per plant achieved from combination of 30 kg Nitrogen and bradyrhizobium. Also both bio-fertilizer was able to increase number of pod per plant. Maximum 1000 seed weight obtained from inoculation of plants with bradyrhizobium and mycorrhiza simultaneously with no nitrogen utilization. Application of 60 kg ha-1 nitrogen caused to decreased mycorrhizal symbiosis about 20.22 percent in comparison with no use of starter fertilizer. Application bradyrhizobium and mycorrhiza under the application of 30 kg ha-1 nitrogen, produced the highest grain yield (511.67 g m-2) and biological yield (1223.16 g m-2).

scholarly journals Yield Stability Analysis of Maize (Zea mays L.) Hybrids Using Parametric and AMMI Methods

Scientifica ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Seyed Habib Shojaei ◽  
Khodadad Mostafavi ◽  
Ali Omrani ◽  
Saeed Omrani ◽  
Seyed Mohammad Nasir Mousavi ◽  
...  
Keyword(s):  
Zea Mays ◽  
Grain Yield ◽  
Zea Mays L ◽  
Block Design ◽  
High Yield ◽  
Stability Parameters ◽  
Maize Hybrids ◽  
Randomized Complete Block Design ◽  
Ammi Analysis ◽  
The Stability

The present study investigated the stability and adaptability of maize (Zea mays L.) hybrids. In this study, 12 maize hybrids were planted and examined considering the grain yield. The experiment was arranged in a randomized complete block design (RCBD) with three replications in four research stations in Iran during two crop years. The combined analysis of variance showed that genotype-environment interactions were significant at one percent probability level. The grain yield can stabilize, and hybrids with specific adaptability are recommended to each environment. Hybrids with specific adaptability can be recommended to all types of the environment. Means comparison yield of the genotypes identified DC370 as a high-yield genotype. Regarding AMMI analysis, genotype × environment interactions (GEIs) and two first components were found significant. The SC647 genotype was identified as the most stable genotype. Regarding the stability parameters, SC647 and KSC705 genotypes were selected as the most stable genotypes. From AMMI1 and AMMI2 graphs, the SC647 genotype was identified as the most stable genotype compared with other hybrids.

scholarly journals Effect of Nitrogen Biofertilizers on Yield and Yield Components of Different Maize (Zea mays L.) Cultivars

2015 ◽  
Vol 9 (5) ◽  
pp. 117-121
Author(s):  
Amin Farnia ◽  
Vahid Kazemi Ashjardi
Keyword(s):  
Zea Mays ◽  
Plant Height ◽  
Yield Components ◽  
Biomass Yield ◽  
Zea Mays L ◽  
Block Design ◽  
Fertilizer Treatment ◽  
Maximum Production ◽  
Leaf Weight ◽  
Yield And Yield Components

In order to evaluate the effect of nitrogen bio-fertilizers on yield and yield and yield components of different maize (zea mays L.) cultivars  a field experiment was conducted in Islamic Azad University of Boroujerd, Iran (at Isfahan region), during the growing seasons 2013- 2014. The experiment was laid out in a split-plot design based on randomized block design with three replications. Treatments were different cultivars (Siloking, NS4015, Maxima and SC704) in main plots and nitrogen bio-fertilizers (Azotobacter, Nitroxin and Supernitroplus) with control in sub plots. The results reviled that the effect of cultivar treatmenton all traits was significant. Effect of N bio-fertilizer treatment was significant on stem weight, leaf weight, ear weight and biomass yield only. Interaction effect of them was significant on all traits excepting number of leaf per plant and ear weight.   Application of nitrogen biofertilizers increased yield components of different cultivars of maize specially, for Siloking cultivar and Supernitroplus bio-fertilizer. Siloking cultivar with application of Supernitroplus biofertilizer had the highest plant height and leaf weight and Maxima cultivar with application of Nitroxin biofertilizer had the lowest plant height and leaf weight. However, NS4015 cultivars with non-application of any of N biofertilizer had the highest stem weight. Siloking cultivar had the highest number of leaf per plant and NS4015 cultivar had the lowest number of leaf per plant. Siloking cultivar had the highest all of the traits excepting stem weight. So, this cultivar was more useful than other cultivars for achieve to maximum production of foliage in Isfahan province. However Siloking cultivar with application of Supernitroplus nitrogen biofertilizer treatment had the highest biomass yield as foliage yield and we propose this treatment for maximum production of maize in Isfahan environmental condition.DOI: http://dx.doi.org/10.3126/ijls.v9i5.12711

scholarly journals Soybean yield and yield components affected by the mycorrhiza and bradyrhizobium at different rates of starter nitrogen fertilizer

2017 ◽  
Vol 38 (4Supl1) ◽  
pp. 2409 ◽  
Author(s):  
Mohammad Ali Aboutalebian ◽  
Masoumeh Malmir
Keyword(s):  
Nitrogen Fertilizer ◽  
Yield Components ◽  
Agricultural Research ◽  
Block Design ◽  
Fertilizer Application ◽  
Mycorrhizal Symbiosis ◽  
Research Station ◽  
Yield And Yield Components ◽  
Biological Yield ◽  
Number Of Leaves

In order to study interaction between mycorrhiza and bradyrhizobium on yield of soybean under different amounts of starter nitrogen fertilizer, a field experiment was conducted at the agricultural research station, Bu-Ali Sina University in 2015 growing season. A factorial experiment based on randomized complete block design was arranged with three replications. Experiment factors covering three levels of starter nitrogen of 0, 30 and 60 kg ha-1, bradyrhizobiumin two level of inoculated and non-inoculated and mycorrhiza including application and non-application levels. Results indicated that plant height, number of leaves per plant, yield and yield components and biological yield and mycorrhizal symbiosis percent affected by interaction of studied factors significantly. Maximum number of pod per plant achieved from combination of 30 kg Nitrogen and bradyrhizobium. Also both bio-fertilizer was able to increase number of pod per plant. Maximum 1000 seed weight obtained from inoculation of plants with bradyrhizobium and mycorrhiza simultaneously with no nitrogen utilization. Application of 60 kg ha-1 nitrogen caused to decreased mycorrhizal symbiosis about 20.22 percent in comparison with no use of starter fertilizer. Application bradyrhizobium and mycorrhiza under the application of 30 kg ha-1 nitrogen, produced the highest grain yield (511.67 g m-2) and biological yield (1223.16 g m-2).

scholarly journals Green entrepreneurship in India

2022 ◽  
Vol 11 (2) ◽  
pp. 72-75
Author(s):  
YD Nayak ◽  
AP Sahoo
Keyword(s):  
Yield Components ◽  
Agricultural Research ◽  
Block Design ◽  
Fruit Yield ◽  
System Software ◽  
Randomized Complete Block Design ◽  
Yield And Yield Components ◽  
Number Of Leaves ◽  
Cropping Seasons ◽  
Better Than

The experiment was conducted to evaluate the adaptability of newly released papaya varieties at Chano Mille research site of Arba Minch Agricultural Research Center during 2019-2020 cropping seasons. The three hermaphrodite papaya varieties namely; Braz-HS1, Koka-HM1 and Meki-HL1 were used for the study and laid-out in a Randomized Complete Block Design in three replications. Data on yield and yield components were collected and analyzed by using analysis of variance (ANOVA) through Statistical Analytics System software. The ANOVA results revealed that there were significant variations among papaya varieties for the studied parameters. Significantly, the highest number of fruits plant-1, number of leaves and fruit yield were obtained from Braz-HS1 papaya variety. The fruit yield of Braz-HS1 variety was 46% higher than that of Koka-HM1. In general, Braz-HS1 papaya variety performed (in terms of number of fruits and fruit yield) better than the rest two varieties. Thus, Braz-HS1 papaya variety could be recommended for the papaya growers in the study area and vicinity with similar agro-ecology. Int. J. Agril. Res. Innov. Tech. 11(2): 72-75, Dec 2021

scholarly journals MODIFIED MASS SELECTION WITHIN CORN SYNTHETIC VARIETY

2016 ◽  
Vol 47 (1) ◽  
Author(s):  
F.Y. Baktash
Keyword(s):  
Zea Mays ◽  
Grain Yield ◽  
Yield Components ◽  
Zea Mays L ◽  
Block Design ◽  
Mass Selection ◽  
Selection Intensity ◽  
Original Population ◽  
Randomized Complete Block Design ◽  
Synthetic Varieties

This research  was undertaken to evaluate five cycles of modified mass selection to improve grain yield in synthetic corn (Zea mays L.) variety IPA-5018. The selection was carried out in spring and fall seasons, during, 2013-2015 using 10% selection intensity. The five  populations obtained after selection and the original population were evaluated. The experimental design was a randomized complete block design with five replications. The results were revealed a significant differences among selection cycles in grain yield and some yield components.  The cycle five produced highest grain yield (9699.30 kg.ha-1) and increased 34.88% to the original population. The regression of grain yield, number of grains.ear-1 and grain weight to selection cycles were significantly linear and R2 more than 80%. We  concluded that the  modified mass selection  could be used successfully in improving the grain yield and some yield components of  corn synthetic varieties.

Sign in / Sign up

Export Citation Format

Share Document