scholarly journals Review of up-to-date approaches for extinguishing oil and petroleum products

2021 ◽  
pp. 169-174
Author(s):  
R. I. Shevchenko ◽  
◽  
V. M. Strelets ◽  
V. M. Loboichenko ◽  
A. V. Pruskyi ◽  
...  
Keyword(s):  
Acoustic Method ◽  
Petroleum Products ◽  
New Method ◽  
Environmental Characteristics ◽  
Acoustic Effect ◽  
Fire Extinguishing ◽  
Innovative Methods ◽  
Further Development ◽  
Fire Extinguishers

The paper provides a review of up-to-date approaches for extinguishing oil and petroleum products. The variability of extinguishing methods and fire extinguishing agents is noted. Fire extinguishing agents used in extinguishing petroleum products are considered in more detailed way, and their environmental characteristics are discussed. The ambiguity of using various foams for extinguishing the fire is shown. A new method for extinguishing oil and petroleum products, based on the acoustic effect, and the capabilities of acoustic fire extinguishers for preventing and eliminating the combustible hydrocarbon fires, and their identification are analyzed. The further development of known approaches and the simultaneous emergence of innovative methods for extinguishing oil and petroleum products are shown. Keywords: oil; petroleum products; extinguishing agent; environmental characteristics; extinguishing foam; acoustic method.

EVOLUTION OF SANDY BEACH IN THE CITY OF VARNA

2017 ◽  
Author(s):  
Dachev Veliko Z ◽  
Dachev Veliko Z
Keyword(s):  
Retrospective Review ◽  
Anthropogenic Impact ◽  
Sandy Beach ◽  
New Method ◽  
Coastal Protection ◽  
Area Growth ◽  
Long Time ◽  
The City ◽  
Further Development ◽  
Beach Volume

The article represents a retrospective review of long time research of genesis and development of the Central beach in the City of Varna which makes possible a forecast of its further development. Both natural and anthropogenic impact on the beach evolution is taken into consideration. It is ascertained that construction of coastal protection structures at the northern part of the beach in 80’s resulted in cessation of natural beach area growth. The strengthen of a breakwater in the main port and illegal building also contributed to considerable coast recession and beach volume reducing. Because of this a recreational potential of the Central beach is gradually decreasing. New method named “cross-shore sediment bypassing” is suggested to reduce the negative trend.

Review of the Environmental Characteristics of Fire Extinguishing Substances of Different Composition used for Fires Extinguishing of Various Classes

2019 ◽  
Vol 14 (16) ◽  
pp. 5925-5941 ◽  
Author(s):  
Valentyna Loboichenko ◽  
Victor Strelets ◽  
Maya Gurbanova ◽  
Andriy Morozov ◽  
Pavlo Kovalov ◽  
...  
Keyword(s):  
Environmental Characteristics ◽  
Fire Extinguishing

EVOLUTION OF SANDY BEACH IN THE CITY OF VARNA

2017 ◽  
Author(s):  
Dachev Veliko Z ◽  
Dachev Veliko Z
Keyword(s):  
Retrospective Review ◽  
Anthropogenic Impact ◽  
Sandy Beach ◽  
New Method ◽  
Coastal Protection ◽  
Area Growth ◽  
Long Time ◽  
The City ◽  
Further Development ◽  
Beach Volume

The article represents a retrospective review of long time research of genesis and development of the Central beach in the City of Varna which makes possible a forecast of its further development. Both natural and anthropogenic impact on the beach evolution is taken into consideration. It is ascertained that construction of coastal protection structures at the northern part of the beach in 80’s resulted in cessation of natural beach area growth. The strengthen of a breakwater in the main port and illegal building also contributed to considerable coast recession and beach volume reducing. Because of this a recreational potential of the Central beach is gradually decreasing. New method named “cross-shore sediment bypassing” is suggested to reduce the negative trend.

The Study of Fire-extinguishing Process of Modelled Fire Seats

2021 ◽  
pp. 57-62
Author(s):  
V.N. Bordakov ◽  
Keyword(s):  
Flow Rate ◽  
Experimental Studies ◽  
Physical Modelling ◽  
Specific Flow Rate ◽  
Specific Flow ◽  
Acceptable Error ◽  
Fire Extinguishing ◽  
Fire Zone ◽  
Analysis Of Results ◽  
Fire Extinguishers

Test-fires to determine fire-extinguishers’ efficiency for extinguishing B class fires are conducted by operators equipped with working clothes, which does not comply with the requirements of physical modelling. This is why the ranks of extinguished modelled seats are significantly overestimated. The quantitative results of fire seats’ extinguishing can be comparatively evaluated in accordance with the value of specific flow rate of a fire-extinguishing agent. As it was detected, the specific flow rate of a fire-extinguishing agent does not actually depend on the rank of modelled fire seat when extinguished by an operator wearing thermal-protective clothes. At the same time, it is increasing along with the expansion of the fire zone scale in case the fire is extinguished without special protective clothes. Consequently, to increase the fire-extinguisher’s efficiency data reliability, the certifying tests should be conducted in conditions close to the real application conditions when the first person to firefight is not equipped with such special protective clothes. The experimental studies to determine the specific flow rate of a fire-extinguishing agent used modelled fire seats of various ranks. The analysis of results showed that the fire-extinguishers ensuring generation of drops of prevailing size more than 0,5 mm are required to extinguish the modelled sire seats. The degree of increasing flow rate for the fire-extinguishing agent to eliminate a fire and observation of a safe distance from the flame for an operator are conditioned by the scale of fire zone and affect the specific flow rate of agent required to ensure stable fire-extinguishing. Based on the results of extinguishing the fire seats «34В» or «55В», it is demonstrated that via using a correction factor it is possible, assuming an acceptable error, to evaluate the flow rate of fire-extinguishing agent to extinguish a modelled fire seat of any rank.

Chemical composition of the renewed fire extinguishing powder and its physical characteristics

2020 ◽  
pp. 70-76
Author(s):  
Azzaya T ◽  
Burmaa G ◽  
Alen S ◽  
Batsaikhan V
Keyword(s):  
Fuel Oil ◽  
Physical Parameters ◽  
Endothermic Effect ◽  
Water Release ◽  
Release Process ◽  
Fire Extinguishing ◽  
Inorganic Substances ◽  
Main Component ◽  
Water Repellence ◽  
Fire Extinguishers

Water, foam, dry powder, carbon dioxide and liquid chemicals are used as fire extinguishers depending on the fire types. The fire classification of ABC type includes fires caused by paper, wood, dye, fuel, oil, lubricants and flammable gases. In this work, the investigation of the procedure for re-determining the composition of prepared fire extinguishers was carried out depending on the ratio of organic and inorganic substances, and their fire extinguishing activity was tested. The Sample-1 contains about 50% of ammonium dihydrophosphate (NH4H2PO4) which is taking into account the main component and the sum of ammonium sulphate (NH4)2SO4 and other inorganic and organic components by 50%. As a result of fire extinction tests, its fire extinguishing activity was higher than that of other Samples included different ratios of substances. Based on the thermogravimetric analysis of the Sample -1, the polymerization and water release process of NH4H2PO4 was detected as endothermic effect. The weight loss was occurred by 74% and 26% remained as P2O5 when temperature reached to highest degree. Some physical parameters such as moisture content, water repellence, density and particle size were analyzed according to ISO standard method and all these important parameters showed that it can meet the requirements for fire extinguishing powder standards. Гал унтраагч шинэчилсэн бэлдмэлийн найрлага, түүний физик шинж чанарын судалгаа Хураангуй: Ус, хөөс, хуурай нунтаг, нүүрс хүчлийн хий ба химийн шингэн бодис зэргийг галын төрлөөс хамааруулан гал унтраагчаар ашигладаг. Галын ABC ангилалд цаас, мод, будаг, шатахуун, тос, тосолгооны материал, шатамхай хий зэргээс үүдэлтэй гал хамаарна. Энэхүү ажлаар импортын гал унтраагч бодисын найрлагыг шинэчлэн тогтоох судалгааг органик ба органик бус химийн бодисуудын харьцаанаас хамааруулан явуулж, тэдгээрийн гал унтраах идэвхийг ABC ангиллын галд туршив. Үндсэн бүрдэл болох аммонийн дигидрофосфат (NH4H2PO4)-ыг 50%, (NH4)2SO4 ба бусад бүрэлдэхүүн бодисуудын нийлбэрийг мөн 50%-иар тооцоолон авсан. Бэлдмэл 1-ийн гал унтраах идэвх нь бусад бэлдмэлүүдийн идэвхээс өндөр байв. Бэлдмэлийн термографийн судалгаагаар NH4H2PO4-ын их хэмжээний дулаан шингээн полимержих, ус ялгаруулах процесс DTA-ийн муруйд эндо эффект хэлбэрээр илэрсэн ба температурын дээд утгад жингийн алдагдал 74%-д хүрч, 26% нь P2O5 хэлбэрээр үлдсэн. Гал унтраагч нунтгийн физик шинж чанарын гол үзүүлэлтүүд болох чийг, хувийн жин, ус үл нэвтрүүлэх чадвар, ширхэглэлийн хэмжээг тодорхойлсон ба эдгээр үзүүлэлтүүд нь стандартын шаардлагуудыг хангасан байна. Түлхүүр үг: Гал унтраагч нунтаг, идэвх, аммонийн дигидрофосфат, DTA/TG, физик үзүүлэлт  

scholarly journals Impact of bitumen composition on empirical properties

2018 ◽  
Vol 196 ◽  
pp. 04038
Author(s):  
Eva Remišová ◽  
Michal Holý
Keyword(s):  
Crude Oil ◽  
Sulfur Content ◽  
Vacuum Distillation ◽  
Petroleum Products ◽  
The Other ◽  
Distillation Residue ◽  
Heavy Fractions ◽  
Further Development ◽  
Vacuum Distillation Residue

In recent years, there has been a further development of refining technology, which make it possible to better use of crude oil, which also has a major impact on the quality of bitumen. Most European refineries, of course, are processing, for reasons of the resale of petroleum products, especially petroleums suitable for the recovery of light and middle fractions. Therefore, light petroleums are required, with low yields of heavy fractions, which are highly economically and in dispositions efficient for processors on the petroleum market. Emphasis is placed on the sulfur content, the paraffin content is no longer the most important aspect. Less important from the perspective of the refinery is the content and the ratio of asphaltenes and maltenes. There is no doubt that we will have to change our view on petroleum products. Their availability will continue to decline, their price, on the other hand, is likely to grow in relation to falling supplies of resources. Therefore, the view of the bitumen must be changed. The most common way of production of PG bitumen is vacuum distillation, which is carried out in such a way that the vacuum distillation residue satisfies it´s properties bitumen requirements for the relevant penetration.

Sign in / Sign up

Export Citation Format

Share Document