FIRST ROMANIAN COMPUTATIONAL SIMULATION OF AIR-METHANE MIXTURE EXPLOSION

2017 ◽  
Author(s):  
Nicolae-Ioan Vlasin
Keyword(s):  
Computational Simulation ◽  
Methane Mixture

The study for constant force characteristic of C-shaped superelastic SMA

2020 ◽  
Vol 64 (1-4) ◽  
pp. 1253-1259
Author(s):  
Minghui Wang ◽  
Hongliu Yu
Keyword(s):  
Shape Memory Alloys ◽  
Shape Memory ◽  
Medical Device ◽  
Soft Tissues ◽  
Computational Simulation ◽  
Force Characteristic ◽  
Constant Force ◽  
Curve Shape ◽  
Artificial Sphincter ◽  
Round Bar

Clamping devices with constant force or pressure are desired in medical device, such as hemostatic forceps and the artificial sphincter, to prevent soft tissues from injures due to overloading. It is easily obtained by stretching an SMA wire. However, studies with SMA bending round bar have seldom been reported before. This paper studied constant force characteristic of C-shaped round bar with shape memory alloys. Optimization designs of the components were carried out with computational simulation. Numerical results show that the phenomenon of constant force strongly depends on contour curve shape and geometric dimensions of the C-shaped round bar of SMA component.

Influence of trees on the energy consumption of a social housing in mid-western Brazil

2019 ◽  
pp. 53-65
Author(s):  
Renata Domingos ◽  
Emeli Guarda ◽  
Elaise Gabriel ◽  
João Sanches
Keyword(s):  
Energy Consumption ◽  
Solar Radiation ◽  
Thermal Comfort ◽  
Air Conditioning ◽  
Computational Simulation ◽  
Building Energy ◽  
General Idea ◽  
Heat Island ◽  
Study Region ◽  
Ample Evidence

In the last decades, many studies have shown ample evidence that the existence of trees and vegetation around buildings can contribute to reduce the demand for energy by cooling and heating. The use of green areas in the urban environment as an effective strategy in reducing the cooling load of buildings has attracted much attention, though there is a lack of quantitative actions to apply the general idea to a specific building or location. Due to the large-scale construction of high buildings, large amounts of solar radiation are reflected and stored in the canyons of the streets. This causes higher air temperature and surface temperature in city areas compared to the rural environment and, consequently, deteriorates the urban heat island effect. The constant high temperatures lead to more air conditioning demand time, which results in a significant increase in building energy consumption. In general, the shade of the trees reduces the building energy demand for air conditioning, reducing solar radiation on the walls and roofs. The increase of urban green spaces has been extensively accepted as effective in mitigating the effects of heat island and reducing energy use in buildings. However, by influencing temperatures, especially extreme, it is likely that trees also affect human health, an important economic variable of interest. Since human behavior has a major influence on maintaining environmental quality, today's urban problems such as air and water pollution, floods, excessive noise, cause serious damage to the physical and mental health of the population. By minimizing these problems, vegetation (especially trees) is generally known to provide a range of ecosystem services such as rainwater reduction, air pollution mitigation, noise reduction, etc. This study focuses on the functions of temperature regulation, improvement of external thermal comfort and cooling energy reduction, so it aims to evaluate the influence of trees on the energy consumption of a house in the mid-western Brazil, located at latitude 15 ° S, in the center of South America. The methodology adopted was computer simulation, analyzing two scenarios that deal with issues such as the influence of vegetation and tree shade on the energy consumption of a building. In this way, the methodological procedures were divided into three stages: climatic contextualization of the study region; definition of a basic dwelling, of the thermophysical properties; computational simulation for quantification of energy consumption for the four facade orientations. The results show that the façades orientated to north, east and south, without the insertion of arboreal shading, obtained higher values of annual energy consumption. With the adoption of shading, the facades obtained a consumption reduction of around 7,4%. It is concluded that shading vegetation can bring significant climatic contribution to the interior of built environments and, consequently, reduction in energy consumption, promoting improvements in the thermal comfort conditions of users.

Deinking of recycled paper by coupling of the enzyme endo-β-1,4-D-glucanasa and the cellulose, and by using a laboratory flotation column

MRS Advances ◽  
2020 ◽  
Vol 5 (52-53) ◽  
pp. 2669-2678
Author(s):  
Jeovani González P. ◽  
Ramiro Escudero G
Keyword(s):  
Amino Acids ◽  
Sodium Hydroxide ◽  
Paper Industry ◽  
Computational Simulation ◽  
Cellulose Fibers ◽  
Residual Water ◽  
Chemical Reagent ◽  
Recycled Paper ◽  
Flotation Column ◽  
Hydrolysis Of

AbstractDeinking of recycled office (MOW) paper was carried out by using a flotation column and adding separately sodium hydroxide, and the enzyme Cellulase Thricodema Sp., as defibrillators.The de-inked cellulose fibers were characterized according to the standards of the paper industry, to compare the efficiency of the deinking of each chemical reagent used to hydrolyze the fibers and defibrillate them.The computational simulation of the molecular coupling between the enzyme and cellulose was performed, to establish the enzyme-cellulose molecular complex and then to identify the principal amino-acids of endo-β-1,4-D-glucanase in this molecular link, which are responsible for the hydrolysis of the cellulose.Experimental results show the feasibility to replace sodium hydroxide with the enzyme Cellulase Thricodema Sp., by obtaining deinked cellulose with similar optical and physical properties.The use of the enzyme instead of sodium hydroxide avoids the contamination of the residual water; in addition to that, the column is operated more easily, taking into consideration that the pH of the system goes from alkaline to neutral.

Computational simulation of the air wake over a naval transport vessel

AIAA Journal ◽  
2002 ◽  
Vol 40 ◽  
pp. 2130-2133
Author(s):  
M. J. Guillot
Keyword(s):  
Computational Simulation ◽  
Transport Vessel

Computational simulation of flow in a supersonic gas separator

2017 ◽  
Author(s):  
Matheus Augusto Campos Pires ◽  
Bruno Carmo ◽  
Reinaldo Orselli ◽  
Breno de Almeida Avancini
Keyword(s):  
Computational Simulation ◽  
Gas Separator

Computational simulation applied to improve fuel bioethanol distillation

2013 ◽  
pp. 645-650
Author(s):  
Fabio R.M. Batista ◽  
Antonio J.A. Meirelles
Keyword(s):  
Experimental Validation ◽  
Computational Simulation ◽  
Industrial Plant ◽  
Careful Study ◽  
Optimal Conditions ◽  
Liquid Equilibrium ◽  
Steam Consumption ◽  
Wine Composition ◽  
Standard Solution ◽  
Central Composite

Experimental validation of the process simulation a typical industrial bioethanol unit was conducted, comparing the obtained results with the information collected in an industrial plant. A standard solution containing water, ethanol and 17 congeners was chosen to represent the fermented must, whose composition was selected according to analyses of samples of industrial wines. A careful study of the vapour-liquid equilibrium of the wine components was performed. An attempt to optimise the industrial plant was conducted considering two optimising approaches: the central composite design (CCD) and the Sequential Quadratic Programming (SQP). The process was investigated in terms of bioethanol alcoholic graduation, ethanol recovery, energy consumption and ethanol loss. The results showed that the simulation approach was capable of correctly reproducing a real plant of bioethanol distillation and that the optimal conditions are slightly different from those used at the industrial plant investigated. Substantial fluctuations in wine composition were easily controlled for the two loop controls preventing an off-specification product. The optimised conditions indicate a distillation process able to produce bioethanol according to the legislation requirements and with appropriate steam consumption and loss of ethanol. However, for the production of alcohols with superior qualities, substantial changes in the production system may be required.

Sign in / Sign up

Export Citation Format

Share Document