scholarly journals Studies on the Melt Spinning Process of Square 8-hole Hollow Polyester Fibre

2018 ◽  
Vol 26 (3(129)) ◽  
pp. 14-16 ◽  
Author(s):  
Pei Feng ◽  
Pei Feng ◽  
Jun Pan ◽  
Qihua Ma ◽  
Chongchang Yang ◽  
...  
Keyword(s):  
Experimental Method ◽  
Melt Spinning ◽  
Polyester Fibre ◽  
Computer Numerical Control ◽  
Processing Method ◽  
Silver Electrode ◽  
Numerical Control ◽  
Basic Unit ◽  
Spinning Process ◽  
New Type

In this paper, the shape of the spinneret capillary was discussed, and optimized spinneret capillaries were successfully processed by a computer numerical control processing method which takes a C-shape silver electrode as the basic unit. Based on the optimised spinning process, a new type of square 8-hole hollow PET fibre was prepared by the experimental method.

Technique to Produce Segment-Color Yarn with Ring Frame

2011 ◽  
Vol 332-334 ◽  
pp. 72-76
Author(s):  
Jun Lian ◽  
Bo Jun Xu ◽  
Chun Ping Xie
Keyword(s):  
Basic Principle ◽  
Main Parameter ◽  
Computer Numerical Control ◽  
Numerical Control ◽  
High Quality ◽  
Ring Frame ◽  
New Type

segment-color yarn is a new type yarn. It can be spin by ring frame with computer numerical control. The basic principle of spinning segment-color yarn was developed in this paper. The main parameter of segment-color yarn were discussed. This can help produce high quality segment-color yarn.

Taguchi Optimization to Determine Optimal Denier of the Polyester Fibre

2014 ◽  
Vol 472 ◽  
pp. 688-692
Author(s):  
Shu Wen Wang ◽  
Te Li Su
Keyword(s):  
Taguchi Method ◽  
Melt Spinning ◽  
Signal To Noise Ratio ◽  
Polyester Fibre ◽  
Synthetic Fiber ◽  
Signal To Noise ◽  
Taguchi Optimization ◽  
Spinning Process ◽  
Quality Deviation ◽  
Significant Factors

Polyester fibre is the synthetic fiber made with man-made fibers. Its surface is smooth with the texture of fine linen. It has good flexibility and durability and is the best non-iron fibres. In order to promote the accuracy and reduce the quality deviation of melt spinning, the Taguchi method was adopted in the melt spinning process. The aim of the research is to enhance the optimization of the melt spinning process using the material polyester. First, the Taguchi method is applied to establish the design of experiment. An analysis of variance will be done to arrive at the significant factors that influence the melt spinning quality the most. Lastly, confirmation experiments verified the reproducibility of this experiment. Confirmed by the experiments, results showed that the obtained SN ratios were greater than the signal-to-noise ratio of nine orthogonal array experiments and this means the experiment is reliable.

Computer numerical control of electron beam machining equipments

1977 ◽  
Vol 10 (16) ◽  
pp. 655-662
Author(s):  
A. Schuler ◽  
W. Oberreiter ◽  
H. Hoffmann
Keyword(s):  
Electron Beam ◽  
Computer Numerical Control ◽  
Numerical Control

FPGA-Based Intelligent Software Hardening Chip for Computer Numerical Control System

2011 ◽  
Vol 105-107 ◽  
pp. 2217-2220
Author(s):  
Mu Lan Wang ◽  
Jian Min Zuo ◽  
Kun Liu ◽  
Xing Hua Zhu
Keyword(s):  
High Speed ◽  
High Performance ◽  
Large Scale ◽  
Position Control ◽  
Computer Numerical Control ◽  
Numerical Control ◽  
Cnc Machine Tools ◽  
Cnc Machine ◽  
Cnc System ◽  
Intelligent Software

In order to meet the development demands for high-speed and high-precision of Computer Numerical Control (CNC) machine tools, the equipped CNC systems begin to employ the technical route of software hardening. Making full use of the advanced performance of Large Scale Integrated Circuits (LSIC), this paper puts forward using Field Programmable Gates Array (FPGA) for the functional modules of CNC system, which is called Intelligent Software Hardening Chip (ISHC). The CNC system architecture with high performance is constructed based on the open system thought and ISHCs. The corresponding programs can be designed with Very high speed integrate circuit Hardware Description Language (VHDL) and downloaded into the FPGA. These hardening modules, including the arithmetic module, contour interpolation module, position control module and so on, demonstrate that the proposed schemes are reasonable and feasibility.

Effect of Crucible Parameters on Planar Flow Melt Spinning Process

2015 ◽  
Vol 68 (6) ◽  
pp. 1125-1129 ◽  
Author(s):  
M. Swaroopa ◽  
L. Venu Gopal ◽  
T. Kishen Kumar Reddy ◽  
B. Majumdar
Keyword(s):  
Melt Spinning ◽  
Planar Flow ◽  
Spinning Process
Sign in / Sign up

Export Citation Format

Share Document