Gender Determination by Mental Foramen Using Linear Measurements on Radiographs: A Study in Haryana Population

2016 ◽  
Vol 10 (1) ◽  
pp. 44
Author(s):  
Kusum Singal ◽  
Sapna Sharma
2016 ◽  
Vol 8 (3) ◽  
pp. 176 ◽  
Author(s):  
SR Ashwinirani ◽  
Girish Suragimath ◽  
Vineetha Christopher ◽  
Shobha Bijjargi ◽  
Renuka Pawar ◽  
...  

2018 ◽  
Vol 1 (2) ◽  
pp. 1-9
Author(s):  
Livia Corpas ◽  
Yan Huang ◽  
Bassant Mowafey ◽  
Patrick Semal ◽  
Xin Liang ◽  
...  

The aim of the present study was to compare mandibular neurovascular canal anatomy in human and great apes by using cone beam computed tomography (CBCT). The anatomical variability of mandibular neurovascular canals (mandibular, incisive and lingual canals) of 129 modern humans and great apes (Homo, Pan and Gorilla) were analyzed by linear measurements on CBCT images. The Kruskal-Wallis non-parametric test and Dunn’s all pairs for joint ranks were applied to compare the variability of mandibular canals among these groups. Human, Chimpanzee and Gorilla groups showed significant differences in the dimensions of the mandibular canal, mental foramen, incisive canal, lingual canal and anterior mandibular bone width. Bifid mandibular canals and anterior loops were the anatomical variations most frequently observed in the Gorilla. Humans had a larger mental foramen and a distinctive incisive canal. The latter could not be identified in the Gorilla group. The variability in the anatomy within mandibles of human and non-human primates, shows different forms in the neurovascular structures. In comparison to the mandible of great apes, the incisive canal is suggested to be a feature unique to the human mandible.


2020 ◽  
Vol 10 ◽  
pp. 34
Author(s):  
Khaled Beshtawi ◽  
Emad Qirresh ◽  
Mohamed Parker ◽  
Shoayeb Shaik

Objectives: To compare the linear measurements from digital panoramic (DP) radiographs and cone-beam computed tomography (CBCT) volumes for the localization of the mental foramen (MF). Material and Methods: Thirty-one patients with panoramic and CBCT radiographs depicted on the same machine were analyzed. The vertical and horizontal positions of the MF were compared by the differences in distances measured from reference points to the boundaries (tangents) of the MF in digital panoramic (DP) and CBCT reformatted panoramic (CRP) views. The vertical position of MF was also analyzed on CBCT oblique coronal views (CORO) and compared with its corresponding distances on DP and CRP views. Results: Statistically significant differences (P < 0.05) were found in all compared measurements between CRP and DP views. In addition, the vertical distance (Y1) compared between DP, CRP, and CORO views also showed a statistically significant measurement discrepancy in the mean distance (P < 0.000) with the highest mean difference of 1.59 mm (P < 0.05) was attained from Y1 (DP-CORO). Inter- and intra-examiner analysis indicated a high level of agreement for all measurements. Conclusion: The mean values of discrepancies in measurements between DP and CRP views for horizontal and vertical linear measurements were clinically tolerable. Nevertheless, significant differences in the vertical MF position were detected between the panoramic views (DP, CRP) and the coronal views (CORO). This implies that the use of coronal view measurements during implant planning might reduce the risk of neurovascular injuries.


2018 ◽  
Vol 2018 ◽  
pp. 1-10 ◽  
Author(s):  
Gloria Cartes ◽  
Ivonne Garay ◽  
Naira Figueiredo Deana ◽  
Pablo Navarro ◽  
Nilton Alves

The object of this study was to analyse the morphology and morphometry of the mandibular canal (MC) course and the mental foramen (MF) position in relation to the inferior teeth by panoramic X-ray (PAN). Vertical linear measurements were taken of each hemimandible to obtain the length of the distances analysed. We studied the MF position in relation to inferior premolar roots and the relation between the MC and mandibular teeth roots (MCR). The MF was usually located between the apices of the first and second premolars in younger individuals and immediately below the apex of the inferior second premolar in older individuals. The MC evinced proximity to the third molar, and this relation was not affected by sex or age group. The distances analysed in this study presented a marked difference between gender, with larger values in males than in females. The variations which may occur between individuals and different populations make it essential for dentists and surgeons to plan carefully before procedures involving this region.


2018 ◽  
Vol 22 (3) ◽  
pp. 133-137 ◽  
Author(s):  
Burak Apaydın ◽  
Derya Icoz ◽  
Fusun Yasar ◽  
Faruk Akgunlu

SummaryBackground/Aim: Gender determination is one of the most challenging tasks in medico-legal research and forensic dentistry. Several skeletal components are investigated for this purpose and the mandible is one of them. The mandible has several specific anatomical features. The purpose of this study was to analyze the effects of measurements related to the mental foramen, gonial angle and antegonial angle on gender determination using digital panoramic radiographs.Material and Methods: A retrospective study was planned with 150 digital panoramic radiographs (75 males and 75 females, aged between 20 to 49 years). The radiographs were analyzed by dividing them into two equal gender groups (male and female). Several parameters were compared to determine the gender. The distances from the superior and inferior border of the mental foramen to the basis of the mandible on the right side were measured. Gonial and antegonial angles were evaluated bilaterally. The difference between the males and females were analyzed with independent samples t-test (p<0.05).Results: There was statistically significant difference between the males and females in terms of all the evaluated parameters (p<0.05). The distances related to mental foramen is higher in the males however gonial and antegonial angles are larger in the females.Conclusions: The mental foramen position, gonial and antegonial angles can be used to predict the gender in Turkish population.


Author(s):  
Priyanka Vijay Patil ◽  
Manali Kulkarni ◽  
Sandeep Pagare ◽  
Naveen Shetty ◽  
Hemant Bhutani ◽  
...  

Introduction: The study of forensic sciences often leaves the forensic expert to draw conclusions from any and every material available in determining the identity of the deceased. The initial step in identifying a person is to determine their gender based on their adult skeleton. The human skeleton displays sexual dimorphism, of which the skull is most dimorphic providing an accurateness of 92%. However, in certain situations where the skull may not be found intact, the mandible plays a vital role. The mandible's thick covering of compact bone helps keep it from exploding during a mass tragedy. Dimorphism in the mandible is gender specific and is mainly reflected in its shape and size. The mandible is also easily radiographed and specific linear measurements of the mandibular rami as seen on an OPG are useful indices for gender determination.  Aims: To examine the efficacy of mandibular rami measures such as maximum ramus breadth, maximum ramus height, minimum ramus breadth, condylar height, coronoid height, mandibular body length and gonial angles on the right and left side of an OPG in determining gender. Materials and methods: 110 digital OPG’s (55 males, 55 females) of a Navi Mumbai population were obtained retrospectively from a reputed dental college and hospital. The OPG’s were taken using Xtropan 2000 OPG machine, 10x12 PSP plates, exposure parameters of 75 Kvp, 8 mas, 13 sec, and KODAK CR 7400 digitizer. Master View 3.0 software was used on the desktop computer to measure the mandibular ramus's width and thickness. Maximum ramus breadth, Maximum Ramus height and lowest ramus breadth of the mandibular rami, as well as the height of the condyle and the coronoid bone, and the length of the mandibular body and gonial angles on the right and left sides of the mouth, were all measured. Using a statistical formula, the measurements were substituted and gender was estimated. Result: We used the IBM SPSS v 21.0 statistical software for social sciences to do our statistical study. p0.05 was deemed statistically significant, with a 5% margin of error and a 20% margin of error, giving the study an 80 percent power. In the study group, 51 of the 55 men were expected to be males, while 49 of the 55 females were anticipated to be females, while 6 of the 55 females were predicted to be males. Conclusion: This research shows that the mandibular ramus is a useful tool for determining gender, and digital panoramic imaging yielded the best accurate linear measures. There was considerable sexual dimorphism in the mandibular ramus in the chosen Navi – Mumbai subpopulation, and the combination of 8 factors demonstrated an accuracy of 91.81 percent and was helpful for gender determination.


2015 ◽  
Vol 4 (2) ◽  
pp. 144 ◽  
Author(s):  
Prashanth Shenai ◽  
Nidhin Naroor ◽  
Laxmikanth Chatra ◽  
KM Veena ◽  
PrasannaKumar Rao ◽  
...  

2018 ◽  
Vol 2 (5) ◽  
pp. 115-120 ◽  
Author(s):  
Mansimranjit Kaur Uppal ◽  
Asha Raghunandan Iyengar ◽  
Seema Patil ◽  
Subash Bailoor Vausdev ◽  
Ramya Madhuri Kotni ◽  
...  

AIM: The present study aimed at evaluating the role of mental foramen and mandibular canal in gender determination using CBCT.METHODOLOGY: A total number of 73 volumes of CBCT of the mandible was evaluated. Four measurements were used to assess the bucco-lingual and supero-inferior location of mandibular canal and the supero-inferior location of mental foramen was determined using two measurements on both right and left sides of the mandible. Inter and intra-observer variability was analyzed with help of t-test.RESULTS: Good intra-observer and inter-observer agreement was noted with regard to all the six measurements. The mean of all the measurements of mental nerve foramen and mandibular canal was found to be higher in males than females, however, significant difference was noted with regard to Superior Mental foramen (SMeF) and Superior Inferior Alveolar Canal (SMC) (p=0.037, p<0.001 respectively) on the right side and SIAC and Inferior Inferior Alveolar Canal (IIAC), (p=0.015, p=0.046 respectively) on the left side.CONCLUSION: The results of the present study suggest that SMeF, SIAC and IIAC may be used for gender determination. Further, either side of mandible can be used for this purpose. CBCT was found to be a useful modality in this study for sexual dimorphism.


Sign in / Sign up

Export Citation Format

Share Document