Wireless ECG Monitoring System using IoT based Signal Conditioning Module For Real Time Signal Acquisition

Author(s):  
D Sobya ◽  
S K Muruganandham ◽  
S Nallusamy ◽  
P S Chakraborty
Author(s):  
Jia Hua-Ping ◽  
Zhao Jun-Long ◽  
Liu Jun

Cardiovascular disease is one of the major diseases that threaten the human health. But the existing electrocardiograph (ECG) monitoring system has many limitations in practical application. In order to monitor ECG in real time, a portable ECG monitoring system based on the Android platform is developed to meet the needs of the public. The system uses BMD101 ECG chip to collect and process ECG signals in the Android system, where data storage and waveform display of ECG data can be realized. The Bluetooth HC-07 module is used for ECG data transmission. The abnormal ECG can be judged by P wave, QRS bandwidth, and RR interval. If abnormal ECG is found, an early warning mechanism will be activated to locate the user’s location in real time and send preset short messages, so that the user can get timely treatment, avoiding dangerous occurrence. The monitoring system is convenient and portable, which brings great convenie to the life of ordinary cardiovascular users.


Author(s):  
Hassan Ali ◽  
Ben Ernest Villaneouva ◽  
Raziq Yaqub

Due to the rising number of heart patients and the apparent need for more robust electrocardiogram (ECG) monitoring of these patients, hospitals are increasingly investing in typical cloud technology or centralized hospital server based remote ECG monitoring systems. However, the deployment these systems in rural communities is limited due to the high cost factor. To counter this challenge, in this paper, we focus on the design and implementation of a low cost real time wireless ambulatory ECG monitoring system. The detected ECG signals are first filtered and amplified and then digitally converted by a microcontroller. The digitized ECG signals are then sent over a ZigBee wireless link to a gateway personal computer (PC) at patient’s premises. The received ECG data from the ZigBee connection is displayed in real time via the National Instruments (NI) Laboratory Virtual Instrument Engineering Workbench (LabVIEW) user interface on the PC for instant personalized evaluation of the ECG data. The ECG data can be saved on the PC and sent via email to a remote cardiologist or a clinician. Additionally, the gateway PC at patient’s end acts as web server for sharing patient’s data over the Internet.  The remote off-site physician (medical staff in a hospital) can use a web browser on a PC, laptop or a mobile phone with Internet connection to access patient’s real time ECG trace for monitoring, expert review and diagnosis. It is shown that the system prototype allows users to acquire reliable ECG signals effectively and simply. The proposed ambulatory ECG system offers an alternative low cost deployment strategy and is especially suited for remote cardiac monitoring of patients in rural communities.


1989 ◽  
Vol 16 (1) ◽  
pp. 49-55 ◽  
Author(s):  
S. W. H. YUEN ◽  
R. Y. P. MA ◽  
Y. C. CHUNG ◽  
J. C. C. HWANG

2013 ◽  
Vol 380-384 ◽  
pp. 794-797
Author(s):  
Yin Yang Zhang ◽  
Jie Sun ◽  
Chun Chen Zhao

In order to meet the flexibility and real-time of the remote ECG monitoring system and other application requirements, a design proposal of a remote real-time ECG monitoring system based on 3G chip is presented in this paper. ARM9-based embedded control chip S3C2440 is chosen as the core and 3G module SIM5218 embedded TCP / IP protocol stack is used to transmit ECG data of the system which has functions of displaying the real-time ECG waveform and alarming. Thus, the real-time transmission of the large ECG data from the user to the monitoring center has been accomplished in this system. The research of the system provides convenience for the timely rescue of patients with cardiovascular disease.


Author(s):  
C.-C. Wu ◽  
W.-C. Kuo ◽  
H.-J. Wang ◽  
Y.-C. Huang ◽  
Y.-H. Chen ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document