scholarly journals Radar system performance test and Ana lysisusing the Radar Simulative Test & Evaluation Laboratory

Author(s):  
Woo-Sung Kim
2018 ◽  
Vol 10 (3) ◽  
pp. 113
Author(s):  
Achmad Auliyaa Zulfikri ◽  
Doan Perdana ◽  
Gustommy Bisono

On this research,Internet of Things (IoT) as an advanced technology is used to monitor the height of trash from a trash can in order to give notification whether the height of trash is already reach the maximum limit or not yet.To support those needs,we used NodeMCU as microcontroller,ultrasonic sensor,MQTT as IoT protocol,and also Android application to show the data.After we did the system performance test,we got the biggest result of end-to-end delay which is 2.06875 seconds when the packet delivery is set to 1000 ms with 3 active nodes and the smallest result which is 0.26055 seconds when the packet delivery is set to 100 ms with 1 active mode.The biggest result of throughput is 597.17 Bytes/s when the packet delivery is set to 100 ms with 1 active mode and the smallest result is 75.86 Bytes/s when the packet delivery is set to 1000 ms with 3 active nodes.The biggest result of availability and reliability is 99.905% when the packet delivery is set to 1000 ms and the smallest result is 99.833% when the packet delivery is set to 100 ms.


Author(s):  
Alex Ng ◽  
Shiping Chen

Performance testing is one of the vital activities spanning the whole life cycle of software engineering. As a result, there are a considerable number of performance testing products and open source tools available. It has been observed that most of the existing performance testing products and tools are either too expensive and complicated for small projects, or too specific and simple for diverse performance tests. In this chapter, we will present an overview of existing performance test products/tools, provide a summary of some of the contemporary system performance testing frameworks, and capture the key requirements for a general-purpose performance testing framework. Based on our previous works, we propose a system performance testing framework which is suitable for both simple and small, as well as complicated and large-scale performance testing projects. The core of our framework contains an abstraction to facilitate performance testing by separating the application logic from the common performance testing functionality, and a set of general-purpose data model.


Author(s):  
Patrick Uche Okafor ◽  
Ndidi Stella Arinze ◽  
Osondu Ignatius Onah ◽  
Ebenezer Nnajiofo Ogbodo

A solar-powered omnidirectional wheelchair is implemented for physically challenged persons. The framework was mounted on the wheels that were connected with two direct current (DC) motors. The ratings of the battery and solar module were determined using system voltage (12V). A 7,805-voltage regulator was used to supply 5VDC to the AT89352 microcontroller. The microcontroller was programmed to provide a reference signal to the motor. The motor provides the needed torque to drive the wheels through interconnected relays. The relays are energized by the microcontroller and omnidirectional movement achieved through relays connected with microprocessor and micro switches, eliminating the need for joysticks and complex control mechanisms. System performance test result showed that the auxiliary solar power supply of the wheelchair increased the travel range by approximately 86% compared with that of a wheelchair powered by battery alone.


1986 ◽  
Vol 32 (2) ◽  
pp. 153
Author(s):  
Lindsay B. Craik

2013 ◽  
Vol 756-759 ◽  
pp. 407-410
Author(s):  
Zhi Hui Xu ◽  
Wei Zhong Li ◽  
Yong Jun Xiao

Comparison with conventional manual adjustment to control the drop speed in clinical infusion, the infusion monitoring system can achieve much more high reliability and efficiency, and is easy to realize the automation of infusion. So the infusion monitoring system has been designed in the last papers. To test the designed system performance, some experiments are done. And the result show that under requirement of the system precision, the time consumption increase with the incensement of speed difference value; Comparing to the conventional PID controller, the fuzzy-PID controller can achieve high precision and little stabilizing time consumption.


1984 ◽  
Vol 27 (5) ◽  
pp. 1556-1562
Author(s):  
B. K. Rein ◽  
L. L. Bashford ◽  
C. E. Walker ◽  
N. W. Sullivan ◽  
R. L. Ogden

Sign in / Sign up

Export Citation Format

Share Document