Chaotic vibrations of carbon nanotubes subjected to a traversing force considering nonlocal elasticity theory

The existence of chaos in the lateral vibration of the carbon nanotube (CNT) can contribute to source of instability and inaccuracy within the nano mechanical systems. So, chaotic vibrations of a simply supported CNT which is subjected to a traversing harmonic force are studied in this paper. The model of the system is formulated by using nonlocal Euler–Bernoulli beam theory. The equation of motion is solved using the Rung–Kutta method. The effects of the nonlocal parameter, velocity and amplitude of the traversing harmonic force on the nonlinear dynamic response of the system are analyzed by the bifurcation diagrams, phase plane portrait, power spectra analysis, Poincaré map and the maximum Lyapunov exponent. The results indicate that the nonlocal parameter, velocity and amplitude of the traversing harmonic force have considerable effects on the bifurcation behavior and can be used as effective control parameters for avoiding chaos.

Topology optimization of laminated composite structures under harmonic force excitations

In this paper, a topology optimization approach for the design of laminated composite structures under harmonic force excitations is proposed. A novel method is developed to calculate the harmonic response for composite laminates, which consists of two steps: firstly, based on the strain energy approach, the damping matrix model of composite laminates is established with the proportional damping assumption; then, the displacement response is calculated by the mode acceleration method The design objective of topology optimization is to minimize the displacement amplitude at the concerning point with an excitation frequency or a frequency band. An extended polynomial interpolation scheme is introduced to penalize the stiffness, damped stiffness and mass of elements. The analytical sensitivities of the objective and constraint functions to the density variables are derived in detail, and the globally convergent method of moving asymptotes is used to solve the optimization problem. Numerical examples are performed to demonstrate the effectiveness and feasibility of the proposed topology optimization method in improving the dynamic performance of laminated composite structures. The influence rules of excitation frequency and layer sequence on topologic shape are also discussed.

Analysis of Flexural Vibrations of a Piezoelectric Semiconductor Nanoplate Driven by a Time-Harmonic Force

The performance of devices fabricated from piezoelectric semiconductors, such as sensors and actuators in microelectromechanical systems, is superior; furthermore, plate structures are the core components of these smart devices. It is thus important to analyze the electromechanical coupling properties of piezoelectric semiconductor nanoplates. We established a nanoplate model for the piezoelectric semiconductor plate structure by extending the first-order shear deformation theory. The flexural vibrations of nanoplates subjected to a transversely time-harmonic force were investigated. The vibrational modes and natural frequencies were obtained by using the matrix eigenvalue solver in COMSOL Multiphysics 5.3a, and the convergence analysis was carried out to guarantee accurate results. In numerical cases, the tuning effect of the initial electron concentration on mechanics and electric properties is deeply discussed. The numerical results show that the initial electron concentration greatly affects the natural frequency and electromechanical fields of piezoelectric semiconductors, and a high initial electron concentration can reduce the electromechanical fields and the stiffness of piezoelectric semiconductors due to the electron screening effect. We analyzed the flexural vibration of typical piezoelectric semiconductor plate structures, which provide theoretical guidance for the development of new piezotronic devices.

OPTIMIZATION OF TUNED MASS DAMPERS ATTACHED TO DAMPED STRUCTURES - MINIMIZATION OF MAXIMUM DISPLACEMENT AND ACCELERATION

A tuned mass damper is a device, which can be highly helpful while dealing with dynamic behaviour of structures. Its proper design is conditioned by knowledge of both loading and the structure properties. In many cases, the structure can be represented by single degree of freedom model, which simplifies the design and optimization of tuned mass dampers. Most of studies focus only on minimization of displacement of the main structure under harmonic force load, however, in many cases, different frequency response function would be more appropriate. This paper presents an extension of design formulas for the H∞ optimization of tuned mass dampers for damped structures and various frequency response functions.

Sources of Harmonic Force and Speed in Mechatronic Automatic Systems

To study resonance and near-resonance phenomena, a symbolic (complex) method was used, which makes it possible to significantly increase productivity, simplify and formalize mathematical transformations. Parallel and sequential connections of elements of a mechanical system with a source of harmonic force or a source of harmonic speed as a source of external mechanical harmonic action are considered. The analytical descriptions of resonance in theoretical mechanics courses correspond to parallel connection. There are devices, in a satisfactory approximation, capable of performing the functions of sources of force and sources of speed. The source of harmonic speed can be a crank-yoke drive and a flywheel with a large moment of inertia. The source of the harmonic force can be the rod of the pneumatic cylinder, the cavity of which communicates with the cavity of another pneumatic cylinder, the diameter of which is immeasurably higher than that of the first, and the piston performs harmonic oscillations. The mechanical harmonic influences described in the courses of theoretical mechanics correspond to the source of the force. Four modes are described — resonances and antiresonances of forces and velocities. The use of the symbolic (complex) method has significantly simplified the study of resonance and near-resonance phenomena, in particular, it has made it possible to deeply unify and formalize the consideration of various mechanical systems. The cumbersome and time-consuming operations associated with the preparation and solution of differential equations have been replaced by simple algebraic transformations. Resonance and antiresonance of forces, resonance and antiresonance of velocities are determined.