3D Imaging of Indentation Damage in Bone

Bone is a complex material comprising high stiffness, but brittle, crystalline bio-apatite combined with compliant, but tough, collagen fibres. It can accommodate significant deformation, and the bone microstructure inhibits crack propagation such that micro-cracks can be quickly repaired. Catastrophic failure (bone fracture) is a major cause of morbidity, particularly in aging populations, either through a succession of small fractures or because a traumatic event is sufficiently large to overcome the individual crack blunting/shielding mechanisms. Indentation methods provide a convenient way of characterising the mechanical properties of bone. It is important to be able to visualise the interactions between the bone microstructure and the damage events in three dimensions (3D) to better understand the nature of the damage processes that occur in bone and the relevance of indentation tests in evaluating bone resilience and strength. For the first time, time-lapse laboratory X-ray computed tomography (CT) has been used to establish a time-evolving picture of bone deformation/plasticity and cracking. The sites of both crack initiation and termination as well as the interconnectivity of cracks and pores have been visualised and identified in 2D and 3D.

Coupled FEM and experimental analysis to characterize initial crack growth regime in AISI 316L(N) stainless steel

Purpose – The purpose of this paper is to present a methodology to predict initial crack growth behavior of crack or notch like stress raisers in AISI 316L(N) stainless steel material subjected to monotonic loading condition. Design/methodology/approach – The methodology for critical crack blunting corresponding to crack initiation in crack or notch like stress raisers is based on critical plastic strain (Epc) at a characteristic distance (lc), where uniform strain (Eu) is considered as Epc and two grain diameter is considered as lc. Further crack growth is based on parabolic crack tip opening displacement (CTOD) scheme established based on coupled experimental and FEM analysis of compact tension (CT) specimen subjected to mode-I loading condition. The FEM predicted load-displacement plots is compared with experimental result of CT specimens with different a/W ratios. It has shown that the proposed methodology could account initial crack blunting appropriately and predict the fracture load and load-displacement plots for initial crack growth regime. Findings – The results show that for crack growth with near straight crack front, experimental data from a CT specimen of particular a/W ratio coupled with plane strain 2D FEM analysis could predict load vs displacement plots for different a/W ratios when initial crack blunting is accounted appropriately with a local damage model. Originality/value – The present study is a part of developing methods to analyse fracture behavior of AISI 316L(N) SS material components used for fast breeder reactor-based power plant being built at Kalpakkam, India.