Frequency Dependancy of Dynamic Force Coefficients for Hermetic Squeeze Film Dampers Utilizing Fluid-Bounding Flexible Structures

The following paper focuses on the dynamic behavior of hermetic squeeze film dampers (HSFD) that utilize fluid-bounding flexible members as a part of the support structure. More specifically, the current paper advances an engineering design modification to the existing HSFD concept, which is aimed at rendering the dynamic force coefficients frequency independent. The paper builds on past HSFD testing and modeling approaches to develop higher fidelity analytical models, which are used to investigate different damper configurations while taking keen interest in the frequency dependency of force coefficients. The analytical study leverages commercially available finite element analysis (FEA) and computational fluid dynamics (CFD) software to conduct several fluid-structure-interaction (FSI) simulations of various damper architectures. In addition to the FSI analysis a more computationally efficient reduced order model (ROM) was developed, coupling structural flexibility with the fluid dynamics in the damper. Ultimately, these design tools were used to identify critical design features and configurations needed for constant linear frequency independent force coefficients. The results show a damper configuration with minimal frequency dependency of the stiffness and damping coefficients when incorporating pass through channels in combination with accumulator volumes. The paper also uses the improved design approach of the HSFD to put forth a notional integrated bearing design incorporating the new HSFD concept.

Load Resistance Optimization of a Broadband Bistable Piezoelectric Energy Harvester for Primary Harmonic and Subharmonic Behaviors

In this study, optimization of the external load resistance of a piezoelectric bistable energy harvester was performed for primary harmonic (period-1T) and subharmonic (period-3T) interwell motions. The analytical expression of the optimal load resistance was derived, based on the spectral analyses of the interwell motions, and evaluated. The analytical results are in excellent agreement with the numerical ones. A parametric study shows that the optimal load resistance depended on the forcing frequency, but not the intensity of the ambient vibration. Additionally, it was found that the optimal resistance for the period-3T interwell motion tended to be approximately three times larger than that for the period-1T interwell motion, which means that the optimal resistance was directly affected by the oscillation frequency (or oscillation period) of the motion rather than the forcing frequency. For broadband energy harvesting applications, the subharmonic interwell motion is also useful, in addition to the primary harmonic interwell motion. In designing such piezoelectric bistable energy harvesters, the frequency dependency of the optimal load resistance should be considered properly depending on ambient vibrations.

Mechanical Consequences of Dynamically Loaded NiTi Wires under Typical Actuator Conditions in Rehabilitation and Neuroscience

In the field of rehabilitation and neuroscience, shape memory alloys play a crucial role as lightweight actuators. Devices are exploiting the shape memory effect by transforming heat into mechanical work. In rehabilitation applications, dynamic loading of the respective device occurs, which in turn influences the mechanical consequences of the phase transforming alloy. Hence in this work, dynamic thermomechanical material behavior of temperature-triggered phase transforming NiTi shape memory alloy (SMA) wires with different chemical compositions and geometries was experimentally investigated. Storage modulus and mechanical loss factor of NiTi alloys at different temperatures and loading frequencies were analyzed under force-controlled conditions. Counterintuitive storage modulus- and loss factor-dependent trends regarding the loading frequency dependency of the mechanical properties on the materials’ composition and geometry were, hence, obtained. It was revealed that loss factors showed a pronounced loading frequency dependency, whereas the storage modulus was not affected. It was shown that force-controlled conditions led to a lower storage modulus than expected. Furthermore, it turned out that a simple empirical relation could capture the characteristic temperature dependency of the storage modulus, which is an important input relation for modeling the rehabilitation device behavior under different dynamic and temperature loading conditions, taking directly into account the material behavior of the shape memory alloy.