Filtration resistance induced by ammonia oxidizers accumulating on the rotating membrane disk

Membrane filtration and oxidation of ammonia were simultaneously performed by using a rotating membrane disk module. Nitrification performance, composition of the accumulated cakes on the membrane and the filtration resistances were investigated under five different operating conditions. The filtration resistance due to the accumulated cake on the membrane was found to be dominant in this treatment method, compared to the resistance due to the micropore plugging or irreversible adherence. The cake consisted mainly of iron, humic substances and bacteria. The possibility that extracellular polymeric substances were related to the cake resistance was also shown. The composition of the cake depended on the length and the condition of operation. Accumulation of ammonia oxidizers caused by oxidation of low concentrations of ammonia (less than 1 mg/l) did not increase transmembrane pressure significantly. Therefore, the application of this treatment method for drinking water treatment is feasible. Filtration resistance due to the micropore plugging or irreversible adherence to the membrane was caused by organic substances.