Estimation of Iron Ore Pellet Softening in a Blast Furnace with Computational Thermodynamics

In blast furnaces it is desirable for the burden to hold a lumpy packed structure at as high a temperature as possible. The computational thermodynamic software FactSage (version 7.2, Thermfact/CRCT, Montreal, Canada and GTT-Technologies, Aachen, Germany) was used here to study the softening behavior of blast furnace pellets. The effects of the main slag-forming components (SiO2, MgO, CaO and Al2O3) on liquid formation were estimated by altering the chemical composition of a commercial acid pellet. The phase equilibria for five-component FeO-SiO2-CaO-MgO-Al2O3 systems with constant contents for three slag-forming components were computed case by case and the results were used to estimate the formation of liquid phases. The main findings of this work suggested several practical means for the postponement of liquid formation at higher temperatures: (1) reducing the SiO2 content; (2) increasing the MgO content; (3) reducing the Al2O3 content; and (4) choosing suitable CaO contents for the pellets. Additionally, the olivine phase (mainly the fayalitic type) and its dissolution into the slag determined the amount of the first-formed slag, which formed quickly after the onset of softening. This had an important effect on the acid pellets, in which the amount of the first-formed slag varied between 10 and 40 wt.%, depending on the pellets’ SiO2 content.

Study on Sintering Characteristics of Ultra-Poor Vanadium-Titanium Magnetite

Artificial rich ore for blast furnace use can be produced by sintering ultra-poor vanadium-titanium magnetite (PVTM) with a high-grade iron concentrate. Here, acid (R = 0.33, 0.50), self-fluxing (R = 1.10), and high-basicity (R = 2.60) PVTM sinters were produced in a sinter pot. Their performances were determined using the comprehensive index. The microstructures of the PVTM sinter were observed by metallographic microscope and scanning electron microscopy equipped with an energy dispersion spectrum (SEM-EDS). The results suggest that the acid PVTM sinter had a low flame front speed, low productivity, an uneven size distribution, and poor softening properties. It did have a high tumble index (TI) and low-temperature reduction disintegration index (RDI). The self-fluxing PVTM sinter had the worst performance (TI, RDI, reducibility index (RI)), while the high-basicity PVTM sinter had the highest flame front speed, highest productivity, a reasonable size distribution, excellent softening properties, and satisfactory TI and RDI values. The main consolidation form of the acid sinter was crystal stock, the main bonding phase of the self-fluxing sinter was silicate, and the main bonding phase of the high-basicity sinter was silico-ferrite of calcium and aluminum (SFCA). The comprehensive index values (from high to low) were the high-basicity (R = 2.60), acid (R = 0.50), natural acid (R = 0.33), and self-fluxing (R = 1.10) PVTM sinters. When the production capacity of the acid pellet was in shortage, the acid PVTM sinter (R = 0.50) could be produced by the surplus from the sinter plant. This replaced a part of the acid pellet and the burden structural model of the blast furnace smelting vanadium so the titanium burden could adopt a ‘high-basicity PVTM sinter + acid V-Ti pellet + acid (R = 0.50) PVTM sinter’.