HVAC Operation Schemes and Commissioning Process Resolving Stack Effect Problem and Adjusting According to Changes in the Environment: A Case Study in High-Rise Building in South Korea

Various problems often arise in high-rise buildings during the winter months due to the stack effect. In this study, the high-rise building of interest, located in South Korea, was experiencing constant loud noises in the winter due to the stack effect. Thus, we created a noise level reduction plan by creating a method for pressurizing the high-rise zones of the building according to outdoor conditions. To discover the appropriate pressurization operating modes, we applied a two-year commissioning process to the 50-story building of interest. The 1st- and 47th-floor elevator halls were identified to have the highest noise levels of all other floors. Prior to applying the reduction plan, the maximum noise level on the first floor with the HVAC system turned off was 85 dB(A) and with the HVAC system turned on it was 70 dB(A). Both values exceeded the criteria of 57 dB(A) for a lobby space of a commercial building. In the case of the 47th floor, the maximum noise level with the HVAC system turned off was 58.7 dB(A) and with the HVAC system turned off was 56.0 dB(A), despite the latter having increased airtightness performance and applying preliminary pressurization (i.e., HVAC operation mode 2). These values exceeded the criteria of 48 dB(A) for an elevator hall in a commercial building. Following this initial data, we determined to pressurize the high/mid-rise zones of the building according to the outdoor air temperature and wind velocity conditions, which we categorized into four types (i.e., HVAC operation mode 4). To this effect, the first-floor elevator hall’s maximum noise level was 56.6 dB(A), meeting the criteria, and the 47th-floor elevator hall’s maximum noise level was 49.5 dB(A), still exceeding the criteria but by an insignificant amount. Although the HVAC pressurization operation we utilized resulted in favorable results for the target building A, it may not be as effective in other new high-rise buildings, creating changes to the indoor air environment or to the energy costs in maintaining a building. However, for the purposes of resolving the stack effect, we believe that the commissioning process we took to optimize the HVAC operation that is presented here can be applied to other new and existing high-rise commercial buildings.

Influence of Courtyard Size on Stack Effect During Building Fires

This paper studied the stack effect in courtyards in buildings through the pressure difference between the top and the bottom in the courtyard through three-dimensional (3D) numerical simulations, which would provide engineering guidance for the fire protection design of courtyards in buildings. During the fire, the stronger the stack effect was, the pressure difference between the top and the bottom was more significant, the fire smoke reached the top of the courtyard more quickly, and the temperature and the smoke concentration at the top were influenced in a shorter time. The influence of the size of the courtyard in the stack effect was investigated. It was found that the stack effect was linearly negatively related to the width of the cross section W and the length of the cross section L, exponentially negatively related with the area of the cross section A, while it was exponentially positively related to the height of the courtyard H. The change in the walls without windows (W) affected ΔPmax and the stack effect more significantly compared with the change in walls with windows (L). When L/W ≤ 1, the stack effect was strengthened as L/W increased; when L/W > 1, the stack effect was weakened as L/W increased. The stack effect was the most significant when L/W = 1.

A Study on the Analysis of Pressure Difference According to the Stack Effect of High-Rise Buildings during Fire

As the number of high-rise buildings in Korea continues to increase, interest in the stack effect is increasing. In particular, in the event of a fire, as the indoor temperature increases, there is the problem that the stack effect increases. Accordingly, it is necessary to analyze the stack effect resulting from temperature change during a fire. In this study, by using CONTAMW simulation, the opening was opened or closed. In the case where the temperature of the fire room rises to the temperature of the growth period caused by a fire, the pressure difference in the building according to the temperature increase during a fire was confirmed. As a result, depending on whether the opening was opened or closed, the pressure difference was uniform for each layer, ranging from 0 to 100 Pa when opened. However, assuming a fire room, the pressure in the fire layer increased to approximately 250 Pa, and it was confirmed that the pressure difference varied greatly for each floor.