Many high formwork systems are currently equipped with health monitoring systems, and the analysis of the data obtained can determine whether high formwork is a hazard. Therefore, the post-processing of monitoring data has become an issue of widespread concern. In this paper, we discussed the fitting effect of the symmetrical high formwork monitoring data using the autoregressive–moving-average (ARMA) model and the back propagation neural networks (BPNN) combined model to process. In the actual project, the symmetry of the high formwork system allows the analysis of local monitoring results to be well extended to the whole. For the establishment of the ARMA model, the accurate judgment of the model order has a significant impact. In this paper, back propagation neural networks (BPNN) are used to simulate the ARMA process. The order of the ARMA model is estimated by determining the optimal neural network structure, which is suitable for linear or nonlinear sequences. We validated this approach from the ARMA model data simulated in Monte Carlo and compared it with the Akaike information criterion (AIC) and Bayesian information criterion (BIC). The length of the sequence, the coefficients and the order of the ARMA model are considered as factors that influence the judgment effect. Under different conditions, the BPNN always shows an accuracy rate of more than 90%, while the BIC only has a higher accuracy rate when the model order is low and the judgment efficiency of the AIC is below 50%. Finally, the proposed method successfully modeled the stress sequence and obtained the stress change trend. Compared with AIC and BIC, the efficiency of the processing time series is increased by about 50% when an order is obtained by BPNN.
Elman and back propagation neural networks based working fluid side energy level analysis of shell-and-tube evaporator in organic Rankine cycle (ORC) system
