FAST-NEPAL: Regionally Calibrated Spectral Method for Reinforced Concrete With Masonry Infills

Reinforced concrete (RC) with masonry infill is one of the most common structural typologies in Nepal, especially in the Kathmandu Valley. Masonry infills are typically made of solid clay bricks produced locally in Nepal. This study aims to calibrate the spectral-based analytical method, namely, FAST, for Nepalese RC-infilled buildings. The FAST method has been initially conceived for Southern European RC buildings with hollow clay brick infills. The calibration is achieved by reviewing code prescriptions and construction practices for RC masonry infills in Nepal and updating the FAST method. The variables of FAST method are calibrated using different information sources and a Bayesian updating procedure to consider the global and local material properties for solid clay bricks. The FAST-NEPAL method obtained is then verified, considering a single school design, for which a detailed state-of-the-art vulnerability assessment is available. Being particularly suitable for large-scale assessment, the method is further validated using data from Ward-35 of Kathmandu Metropolitan City (in the vicinity of Tribhuvan International Airport) obtained from photographic documentation included in a geo-referenced database of buildings collected after the 2015 Nepal earthquake and prepared for census purposes. The comparisons show that the FAST-NEPAL method can be conservative relative to the other data sources for vulnerability and is more accurate at capturing low-level damage. This makes the approach suitable for large-scale preliminary assessment of vulnerability for prioritisation purposes.

The out of plane behaviour of masonry infilled frames

The great interest about out of plane behavior of masonry infill walls has recently increased since it is a key point in the seismic modelling of framed structures. Their contribute to the whole seismic resistance of a framed building cannot be skipped. After a review of the literature on the subject, this paper presents a trilinear constitutive model for the out of plane behavior of masonry infills based on the tensile strength of the constituents. Comparisons with literature model are provided and the identification of the model is based on experimental tests.