sulfonated polyimide
Recently Published Documents


TOTAL DOCUMENTS

189
(FIVE YEARS 32)

H-INDEX

40
(FIVE YEARS 5)

2021 ◽  
Author(s):  
Ravi Kumar Cheedarala ◽  
Jung Il Song

Abstract The development of highly durable, stretchable, and steady triboelectric nanogenerators (TENGs) is highly desirable to satisfy the tight requirement of energy demand. Here, we presented a novel integrated polymeric membrane that is designed by PEDOT:PSSa-naphthalene sulfonated polyimide (PPNSP)-EMI. BF4 Electronic skin (e-skin) for potential TENG applications. The proposed TENG e-skin is fabricated by an interconnected architecture with push-pull 3D ionic electrets that can threshold the transfer of charges through an ion-hopping mechanism for the generation of a higher output voltage (Voc) and currents (Jsc) against an electronegative PTFE film. PPNSP was synthesized from the condensation of naphthalene-tetracarboxylic dianhydride, 2, 2’-benzidine sulfonic acid, and 4,4’diaminodiphenyl ether through an addition copolymerization protocol, and PEDOT:PSSa was subsequently deposited using the dip-coating method. Porous networked PPNSP e-skin with continuous ion transport nano-channels is synthesized by introducing simple and strong molecular push-pull 3D interactions via intrinsic ions. In addition, EMI. BF4 ionic liquid (IL) is doped inside the PPNSP skin to interexchange ions to enhance the potential window for higher output Voc and Iscs. In this article, we investigated the push-pull dynamic interactions between PPNSP-EMI.BF4 e-skin and PTFE and tolerable output performance. The novel PPNSP- EMI.BF4 e-skin TENG produced upto 49.1 V and 1.03 µA at 1 Hz, 74 V and 1.45 µA at 2 Hz, 122.3 V and 2.21 µA at 3 Hz and 171 V and 3.6 µA at 4 Hz, and 195 V and 4.43 µA at 5 Hz, respectively. The proposed novel TENG device was shown to be highly flexible, highly durable, commercially viable, and a prospective candidate to produce higher electrical charge outputs at various applied frequencies.


Membranes ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 946
Author(s):  
Jinchao Li ◽  
Jun Liu ◽  
Wenjie Xu ◽  
Jun Long ◽  
Wenheng Huang ◽  
...  

A sulfonated polyimide (SPI)/Nafion blend membrane composed of a designed and synthesized SPI polymer and the commercial Nafion polymer is prepared by a facile solution casting method for vanadium redox flow battery (VRFB). Similar molecular structures of both SPI and Nafion provide good compatibility and complementarity of the blend membrane. ATR-FTIR, 1H-NMR, AFM, and SEM are used to gain insights on the chemical structure and morphology of the blend membrane. Fortunately, the chemical stability of the SPI/Nafion blend membrane is effectively improved compared with reported SPI-based membranes for VRFB applications. In cycling charge-discharge tests, the VRFB with the as-prepared SPI/Nafion blend membrane shows excellent battery efficiencies and operational stability. Above results indicate that the SPI/Nafion blend membrane is a promising candidate for VRFB application. This work opens up a new possibility for fabricating high-performance SPI-based blend membrane by introduction of a polymer with a similar molecular structure and special functional groups into the SPI polymer.


Energies ◽  
2021 ◽  
Vol 14 (19) ◽  
pp. 6050
Author(s):  
Khurram Liaqat ◽  
Srosh Fazil ◽  
Wajid Rehman ◽  
Shaukat Saeed ◽  
Farid Menaa ◽  
...  

For improving the hydrolytic stability of sulfonated polyimides consisting of five membered anhydrides, novel sulfonated polyimides (NSPIs) were prepared via polymerization of 3,3′,4,4′-benzophenonetetracarboxylic dianhydride (BTDA), with a novel diamine monomer with a pendant sulfonic acid group and 4,4-oxydianiline. Water uptake of this NSPI with an excellent film-forming ability was almost equal to that of Nafion® 117, while their ion exchange capacity (IEC) was 22% higher than Nafion® 117. The loss in weight decreased by 53% and loss in IEC decreased by 66% compared to that of Nafion® 117; both were used to quantitatively measure hydrolytic stability, and radical oxidative stability also increased by 75% when compared with Nafion® 117. Mechanically, this NSPI was superior, and its proton conductivity was higher than Nafion® 117 at elevated temperatures. All these improvements were due to the introduction of this pendant group. Taken together, we herein report a promising renewable energy source based on SPIs capable of displaying proton conductivity and enhanced hydrophilicity.


2021 ◽  
pp. 51310
Author(s):  
Nisar Ali ◽  
Farman Ali ◽  
Amir Said ◽  
Sania Khurshid ◽  
Zeshan Ali Sheikh ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document