Interaction of Self-Sustained Pulses in Tunnel-Diode Oscillator Lattices

A one-dimensional lattice in tunnel-diode (TD) oscillators supports self-sustained solitary pulses resulting from the balance between gain and attenuation. By applying the reduction theory to the device’s model equation, it is found that two relatively distant pulses moving in the lattice are mutually affected by a repulsive interaction. This property can be efficiently utilized in equalizing pulse positions to achieve jitter elimination. In particular, when two pulses rotate in a small, closed lattice, they separate evenly at the asymptotic limit. As a result, the lattice loop can provide an efficient platform to obtain low-phase-noise multiphase oscillatory signals. In this work, the interaction between two self-sustained pulses in a TD-oscillator lattice is examined, and the properties of interpulse interaction are validated by conducting several measurements using a test breadboarded lattice.

Passive mode-locking and terahertz frequency comb generation in resonant-tunneling-diode oscillator

Optical frequency combs in the terahertz frequency range are long-awaited frequency standards for spectroscopy of molecules and high-speed communications. However, a terahertz frequency comb based on a compact, efficient and room-temperature-operating device remains unavailable especially in the frequency range of 0.1 to 3 THz. In this paper, we show that the resonant-tunneling-diode oscillator can be passively mode-locked by optical feedback and generate a terahertz frequency comb. The standard deviation of the spacing between the comb lines, i.e., the repetition frequency, is reduced to less than 420 mHz by applying external bias modulation. A simulation model successfully reproduces the mode-locking behavior by including the nonlinear capacitance of RTD and multiple optical feedback. Since the mode-locked RTD oscillator is a simple semiconductor device that operates at room temperature and covers the frequency range of 0.1 to 3 THz, it can be used as a frequency standard for future terahertz sensing and communications.

Discrete Fourier Transform Radar in the Terahertz-Wave Range Based on a Resonant-Tunneling-Diode Oscillator

We used a resonant-tunneling-diode (RTD) oscillator as the source of a terahertz-wave radar based on the principle of the swept-source optical coherence tomography (SS-OCT). Unlike similar reports in the terahertz range, we apply the stepwise frequency modulation to a subcarrier obtained by amplitude modulation instead of tuning the terahertz carrier frequency. Additionally, we replace the usual optical interference with electrical mixing and, by using a quadrature mixer, we can discriminate between negative and positive optical path differences, which doubles the measurement range without increasing the measurement time. To measure the distance to multiple targets simultaneously, the terahertz wave is modulated in amplitude at a series of frequencies; the signal returning from the target is detected and homodyne mixed with the original modulation signal. A series of voltages is obtained; by Fourier transformation the distance to each target is retrieved. Experimental results on one and two targets are shown.