perfect cleavage
Recently Published Documents


TOTAL DOCUMENTS

63
(FIVE YEARS 13)

H-INDEX

10
(FIVE YEARS 2)

Author(s):  
Hexiong Yang ◽  
Tommy Yong ◽  
Robert T. Downs

ABSTRACT A new mineral species, ferrobobfergusonite, ideally □Na2Fe2+5Fe3+Al(PO4)6, has been found in the Victory Mine, Custer County, South Dakota, USA. It is massive and associated with ferrowyllieite, schorl, fillowite, arrojadite, quartz, and muscovite. Broken pieces of ferrobobfergusonite are blocky or tabular with single crystals up to 0.9 × 0.7 × 0.4 mm. No twinning or parting is observed macroscopically. The mineral is deep green-brown and transparent with a pale green-yellow streak and vitreous luster. It is brittle and has a Mohs hardness of ∼5, with perfect cleavage on {010}. The measured and calculated densities are 3.68(1) and 3.69 g/cm3, respectively. Optically, ferrobobfergusonite is biaxial (+), with α = 1.698 (2), β = 1.705 (2), γ = 1.727 (2) (white light), 2V (meas.) = 65(2)°, 2V (calc.) = 60°, with orientation of the optic axes α ∧ X = 16°, β = Y, with X = yellowish brown, Y = brown, and Z = deep brown. The dispersion is very strong with r > v. The calculated compatibility index based on the empirical formula is 0.017 (superior). An electron microprobe analysis yielded an empirical formula (based on 24 O apfu) of (Na1.72□1.28)Σ3.00(Fe2+3.50Mn0.89Mg0.44Ca0.13)Σ4.96(Fe3+0.77Al0.23)Σ1.00Al(PO4)6. Ferrobobfergusonite is isostructural with bobfergusonite, a member of the alluaudite supergroup. It is monoclinic, with space group P21/n and unit-cell parameters a = 12.7156(3), b = 12.3808(3), c = 10.9347(3) Å, β = 97.3320(10)°, and V = 1707.37(7) Å3. The crystal structure of ferrobobfergusonite contains six octahedral M (= Fe2+, Mg, Mn2+, Al, Fe3+) sites and five X (= Na, Mn2+, Ca) sites with coordination numbers between 6 and 8. The six MO6 octahedra share edges to form two types of kinked chains extending along [101], with one consisting of M1–M4–M5 linkages and the other of M2–M3–M6 linkages. These chains are joined by PO4 tetrahedra to form sheets parallel to (010), which are linked together through corner-sharing between PO4 tetrahedra and MO6 octahedra in the adjacent sheets, leaving open channels parallel to a, where the large X cations are situated. The M cations are strongly ordered over the six sites, with M1, M2, M3, and M4 being dominantly occupied by Fe2+, and M5 and M6 by Fe3+ and Al, respectively. Among the five X sites, the X1 site is filled with Mn2+ and Ca, whereas the X2–X5 sites are partially occupied by Na.


2021 ◽  
Vol 2021 ◽  
pp. 1-6
Author(s):  
Meiben Gao ◽  
Tianbin Li ◽  
Junxun Zhu ◽  
Hongyu Yin ◽  
Yongyi Yang

Using the techniques of X-ray diffraction, polarizing microscopy, uniaxial compression, and scanning electron microscopy (SEM), the relationships between the microfracture features and mineral morphology of granite were studied. The results showed that feldspar, quartz, and biotite are the main components of the granite samples in this study. Biotite has a self-shaped flake structure with perfect cleavage. K-feldspar has a lattice double crystal structure with two groups of cleavage. Plagioclase has a semi-self-shaped plate structure with two groups of cleavage. Quartz is prismatic or granular and exhibits noncleavage. The microfracture features of biotite are flaky with exfoliation, and flake cleavage fracture is mainly determined by its peculiar flaky cleavage. Feldspar (K-feldspar and plagioclase) is plate, layered, or two groups of cleavage and is also mainly determined by its peculiar two groups of cleavage. The microfracture features of quartz are highly irregular, with many randomly distributed intergranular and transgranular cracks, small particles or granule bulges, similar to quartz crystal, and this is due to the noncleavage feature of quartz itself. It is demonstrated that microfractures are preferentially ruptured along cleavage planes for these granite minerals under the action of external forces.


2021 ◽  
Vol 59 (4) ◽  
pp. 763-769
Author(s):  
Hexiong Yang ◽  
Ronald B. Gibbs ◽  
Cody Schwenk ◽  
Xiande Xie ◽  
Xiangping Gu ◽  
...  

ABSTRACT A new mineral species, liudongshengite, ideally Zn4Cr2(OH)12(CO3)·3H2O, has been found in the 79 mine, Gila County, Arizona, USA. It occurs as micaceous aggregates or hexagonal platy crystals (up to 0.10 × 0.10 × 0.01 mm). The mineral is pinkish and transparent with white streak and vitreous luster. It is brittle and has a Mohs hardness of ∼1.5, with perfect cleavage on (001). No twinning or parting is observed macroscopically. The measured and calculated densities are 2.95 (3) and 3.00 g/cm3, respectively. Optically, liudongshengite is uniaxial (−), with ω = 1.720 (8), ε = 1.660 (7) (white light). An electron microprobe analysis, combined with the carbon content measured using an elemental combustion system equipped with mass spectrometry, yielded the empirical formula (Zn3.25Mg0.17Cr2.58)Σ6.00(OH)12(CO3)1.29·3H2O, based on (M2+ + M3+) = 6 apfu, where M2+ and M3+ are divalent and trivalent cations, respectively. Liudongshengite belongs to the quintinite group within the hydrotalcite supergroup and is the Cr-analogue of zaccagnaite-3R, Zn4Al2(OH)12(CO3)·3H2O. It is trigonal, with space group Rm and unit-cell parameters a = 3.1111(4), c = 22.682(3) Å, and V = 190.12(4) Å3. The crystal structure of liudongshengite is composed of positively charged brucite-like layers, [M2+1–xM3+x(OH)2]x+, alternating with negatively charged layers of (CO3)2–·3H2O. Compared to other minerals in the quintinite group, liudongshengite is remarkably enriched in M3+, with an M2+:M3+ ratio of 1.33:1. Like zaccagnaite-3R and many other hydrotalcite-type minerals, liudongshengite may also possess polytypes, as a series of synthetic hydrotalcite-type compounds with a general chemical formula [Zn4Cr2(OH)12]X2·4H2O, where X = Cl–, NO3–, or ½ SO42–, but with unit-cell parameters different from those for liudongshengite, have been reported previously.


2020 ◽  
pp. 1-11
Author(s):  
Travis A. Olds ◽  
Anthony R. Kampf ◽  
Fabrice Dal Bo ◽  
Peter C. Burns ◽  
Xiaofeng Guo ◽  
...  

Abstract Jeankempite, Ca5(AsO4)2(AsO3OH)2(H2O)7, is a new mineral species (IMA2018-090) discovered amongst coatings of arsenate minerals on oxidised copper arsenides from the Mohawk No. 2 mine, Mohawk, Keweenaw County, Michigan, USA. The new mineral occurs as lamellar bundles of colourless to white plates up to 1 mm wide and is visually indistinguishable from guérinite, with which it forms intergrowths. Jeankempite is transparent to translucent with a waxy lustre and white streak, is non-fluorescent under longwave and shortwave ultraviolet illumination, has a Mohs hardness of ~1.5 and brittle tenacity with uneven fracture. Crystals are flattened on {01 $\bar{1}$ } and exhibit perfect cleavage on {01 $\bar{1}$ }. Optically, jeankempite is biaxial (+), α = 1.601(2), β = 1.607(2), γ = 1.619(2) (white light); 2Vmeas. = 72(2)° and 2Vcalc. = 71.0°. The empirical formula is (Ca4.97Na0.013Mg0.017)(As3.99S0.01)4O23H16, based on 23 O and 16 H atoms per formula unit. Thermogravimetric analysis indicates that jeankempite undergoes four weight losses totalling 16.82%, close to the expected loss of 16.30%, corresponding to eight H2O. Jeankempite is triclinic, P $\bar{1}$ , a = 6.710(6), b = 14.901(14), c = 15.940(15) Å, α = 73.583(12)°, β = 81.984(12)°, γ = 82.754(12)°, V = 1507(2) Å3 and Z = 3. The final structure was refined to R1 = 0.0591 for 2781 reflections with Iobs > 3σI. The crystal structure of jeankempite is built from a network of edge- and vertex-sharing CaO6, CaO7 and AsO4 polyhedra, and we hypothesise that the new mineral has formed due to a topotactic reaction brought on by dehydration of preexisting guérinite.


2020 ◽  
Vol 58 (4) ◽  
pp. 413-419
Author(s):  
Stuart J. Mills ◽  
Anthony R. Kampf ◽  
Koichi Momma ◽  
Robert M. Housley ◽  
Joseph Marty

ABSTRACT Müllerite (IMA2019–060) is a new mineral found at several workings on Otto Mountain, 2.5 km NW of Baker, San Bernardino County, California, USA. Müllerite occurs as hexagonal tablets and thin plates up to 0.2 mm across, intergrown ball-like clusters, and scattered flakes. Crystals are yellow, tending to reddish-orange, and have a pale-yellow streak and subadamantine to greasy luster. Crystals are brittle with an irregular fracture and have a hardness of ∼2 and perfect cleavage on {001}. The main forms observed are {100} and {001}. The calculated density is 5.812 g/cm3. The empirical formula (based on 7 O + Cl + I apfu) is Pb1.83Ag0.26Fe0.93Al0.03Cu0.02Te6+0.95O5.56Cl1.30I0.14; the endmember formula is Pb2Fe3+(Te6+O6)Cl. Müllerite is trigonal, space group P312, with the unit cell parameters a = 5.2040(5), c = 8.9654(12) Å, V = 210.23(3) Å3, and Z = 1. The crystal structure of müllerite was refined using Rietveld analysis and converged to Rwp = 4.861%, S = 0.1873, RB = 1.800%, and RF = 0.691%. Müllerite is the Fe-analogue of backite, Pb2Al3+(Te6+O6)Cl.


2020 ◽  
Vol 84 (4) ◽  
pp. 533-539
Author(s):  
Martin Števko ◽  
Jiří Sejkora ◽  
Jakub Plášil ◽  
Zdeněk Dolníček ◽  
Radek Škoda

AbstractThe new mineral fluorapophyllite-(NH4), ideally NH4Ca4(Si8O20)F⋅8H2O, was found at the Vechec andesite quarry located near Vechec village, Vranov nad Topľou Co., Prešov Region, Slovak Republic. It occurs in cavities of quartz–illite–saponite–tobelite xenolith embedded in pyroxene andesite. Fluorapophyllite-(NH4) is associated with calcite, tridymite, pyrite, chabazite-Ca and heulandite-Ca. It forms clusters, aggregates or crystalline crusts consisting of individual, well-developed crystals up to 4 mm in size, exhibiting the forms {110}, {101} and {001}. The mineral is colourless to light pink and translucent with white streak and vitreous to pearly lustre; it is non-fluorescent under ultraviolet radiation. The Mohs hardness is ~4½ to 5, tenacity is brittle, fracture is irregular, and there is perfect cleavage on {001}. The calculated density is 2.325 g cm–3. Fluorapophyllite-(NH4) is optically uniaxial (+) with ω = 1.5414(5) and ɛ = 1.5393(8) (λ = 589 nm). It is non-pleochroic. The empirical formula (based on 29 O + F apfu) is [(NH4)0.55K0.32Na0.07Ca0.06]Σ1.00(Ca4.01Mg0.02)Σ4.03Si7.97O20[F0.84(OH)0.16]Σ1.00⋅8H2O. Fluorapophyllite-(NH4) is tetragonal, space group P4/mnc, a = 8.99336(9) Å, c = 15.7910(3) Å, V = 1277.18(3) Å3 and Z = 2. The seven strongest X-ray powder diffraction lines are [dobs in Å,(I,%)(hkl)]: 7.897(32)(002), 7.812(13)(101), 4.547(14)(103), 3.946(100)(004), 2.985(39)(105), 2.4841(11)(215) and 1.5788(12)(00.10). The crystal structure of fluorapophyllite-(NH4), refined to R1 = 0.0299 for 743 unique (I > 3σI) observed reflections, confirmed that the atomic arrangement is very similar to that of the other members of the apophyllite group. The new mineral is named according to the current nomenclature scheme for apophyllite-group minerals and is an NH4 dominant analogue of fluorapophyllite-(K), fluorapophyllite-(Na) and fluorapophyllite-(Cs).


2020 ◽  
Vol 84 (3) ◽  
pp. 381-389
Author(s):  
Dan Holtstam ◽  
Fernando Cámara ◽  
Andreas Karlsson

AbstractLanghofite, ideally Pb2(OH)[WO4(OH)], is a new mineral from the Långban mine, Värmland, Sweden. The mineral and its name were approved by the International Mineralogical Association Commission on New Minerals, Nomenclature and Classification (IMA2019-005). It occurs in a small vug in hematite–pyroxene skarn associated with calcite, baryte, fluorapatite, mimetite and minor sulfide minerals. Langhofite is triclinic, space group P$\bar{1}$, and unit-cell parameters a = 6.6154(1) Å, b = 7.0766(1) Å, c = 7.3296(1) Å, α = 118.175(2)°, β = 94.451(1)°, γ = 101.146(1)° and V = 291.06(1) Å3 for Z = 2. The seven strongest Bragg peaks from powder X-ray diffractometry are [dobs, Å (I)(hkl)]: 6.04(24)(010), 3.26(22)(11$\bar{2}$), 3.181(19)(200), 3.079(24)(1$\bar{1}$2), 3.016(100)(020), 2.054(20)(3$\bar{1}$1) and 2.050(18)(13$\bar{2}$). Langhofite occurs as euhedral crystals up to 4 mm, elongated along the a axis, with lengthwise striation. Mohs hardness is ca. 2½, based on VHN25 data obtained in the range 130–192. The mineral is brittle, with perfect {010} and {100} cleavages. The calculated density based on the ideal formula is 7.95(1) g⋅cm–3. Langhofite is colourless to white (non-pleochroic) and transparent, with a white streak and adamantine lustre. Reflectance curves show normal dispersion, with maximum values 15.7–13.4% within 400–700 nm. Electron microprobe analyses yield only the metals Pb and W above the detection level. The presence of OH-groups is demonstrated with vibration spectroscopy, from band maxima present at ~3470 and 3330 cm–1. A distinct Raman peak at ca. 862 cm–1 is related to symmetric W–oxygen stretching vibrations. The crystal structure is novel and was refined to R = 1.6%. It contains [W2O8(OH)2]6– edge-sharing dimers (with highly distorted WO6-octahedra) forming chains along [101] with [(OH)2Pb4]6+ dimers formed by (OH)Pb3 triangles. Chains configure (010) layers linked along [010] by long and weak Pb–O bonds, thus explaining the observed perfect cleavage on {010}. The mineral is named for curator Jörgen Langhof (b. 1965), who collected the discovery sample.


2020 ◽  
Vol 84 (3) ◽  
pp. 435-443
Author(s):  
Anthony R. Kampf ◽  
Travis A. Olds ◽  
Jakub Plášil ◽  
Barbara P. Nash ◽  
Joe Marty

AbstractThe new mineral pseudomeisserite-(NH4) (IMA2018-166), (NH4,K)2Na4[(UO2)2(SO4)5]⋅4H2O, was found in the Blue Lizard mine, San Juan County, Utah, USA, where it occurs as light yellow prisms in a secondary assemblage with belakovskiite, blödite, changoite, ferrinatrite, gypsum, ivsite, metavoltine and tamarugite. The streak is very pale yellow and the fluorescence is bright lime green under 405 nm ultraviolet light. Crystals are transparent with vitreous lustre. The tenacity is brittle, the Mohs hardness is 2½, the fracture is curved or conchoidal and there is one perfect cleavage on {100}. The mineral is easily soluble in H2O and has a measured density of 3.22(2) g⋅cm–3. Pseudomeisserite-(NH4) is optically biaxial (–) with α = 1.536(2), β = 1.559(2) and γ = 1.565(2) (white light); 2Vmeas. = 53(1)°; dispersion is r > v, distinct; pleochroism: X colourless, Y light yellow and Z pale yellow (X < Z < Y); optical orientation: Z = b, Y ∧ c = 33° in obtuse β). Electron microprobe analyses (WDS mode) provided (NH4)1.49K0.60Na3.87U2.00S5.04O28H7.78. The five strongest X-ray powder diffraction lines are [dobs, Å(I)(hkl)]: 12.69(76)(100), 6.83(84)(012,102), 6.01(100)($\bar{2}$02), 3.959(67)($\bar{2}$21,$\bar{2}$14,$\bar{1}$23) and 3.135(76)($\bar{2}$06,223,$\bar{1}$16). Pseudomeisserite-(NH4) is monoclinic, P21/c, a = 13.1010(3), b = 10.0948(2), c = 19.4945(14) Å, β = 104.285(7)°, V = 2498.5(2) Å3 and Z = 4. The structural unit in the structure (R1 = 0.0254 for 3837 I > 2σI reflections) is a novel [(UO2)2(SO4)5]6– uranyl-sulfate band.


2020 ◽  
Vol 105 (3) ◽  
pp. 409-421 ◽  
Author(s):  
Rafał Juroszek ◽  
Biljana Krüger ◽  
Irina Galuskina ◽  
Hannes Krüger ◽  
Yevgeny Vapnik ◽  
...  

Abstract A new mineral, siwaqaite, ideally Ca6Al2(CrO4)3(OH)12·26H2O [P31c, Z = 2, a = 11.3640(2) Å, c = 21.4485(2) Å, V = 2398.78(9) Å3], a member of the ettringite group, was discovered in thin veins and small cavities within the spurrite marble at the North Siwaqa complex, Lisdan-Siwaqa Fault, Hashem region, Jordan. This complex belongs to the widespread pyrometamorphic rock of the Hatrurim Complex. The spurrite marble is mainly composed of calcite, fluorapatite, and brownmillerite. Siwaqaite occurs with calcite and minerals of the baryte-hashemite series. It forms hexagonal prismatic crystals up to 250 μm in size, but most common are grain aggregates. Siwaqaite exhibits a canary yellow color and a yellowish-gray streak. The mineral is transparent and has a vitreous luster. It shows perfect cleavage on (1010). Parting or twinning is not observed. The calculated density of siwaqaite is 1.819 g/cm3. Siwaqaite is optically uniaxial (–) with ω = 1.512(2), ε = 1.502(2) (589 nm), and non-pleochroic. The empirical formula of the holotype siwaqaite calculated on the basis of 8 framework cations and 26 water molecules is Ca6.01(Al1.87Si0.12)Σ1.99[(CrO4)1.71(SO4)1.13(SeO4)0.40]Σ3.24(OH)11.63·26H2O. X-ray diffraction (XRD), Raman, and infrared spectroscopy confirm the presence of OH- groups and H2O molecules and absence of (CO3)2– groups. The crystal structure of this Cr6+-analog of ettringite was solved by direct methods using single-crystal synchrotron XRD data. The structure was refined to an agreement index R1 = 4.54%. The crystal structure of siwaqaite consists of {Ca6[Al(OH)6]2·24H2O}6+ columns with the inter-column space (channels) occupied by (CrO4)2–, (SO4)2–, (SeO4)2–, and (SO3)2– groups and H2O molecules. The tetrahedrally coordinated site occupied by different anion groups is subjected to disordering and rotation of these tetrahedra within the structure. The temperature of siwaqaite formation is not higher than~70–80 °C, as is evident from the mineral association and as inferred from the formation conditions of the natural and synthetic members of the ettringite group minerals, which are stable at conditions of T &lt; 120 °C and pH = 9.5–13. The name siwaqaite is derived from the name of the holotype locality—Siwaqa area, where the mineral was found.


2020 ◽  
Vol 84 (2) ◽  
pp. 301-311
Author(s):  
Vladimir Yu. Karpenko ◽  
Elena S. Zhitova ◽  
Leonid A. Pautov ◽  
Atali A. Agakhanov ◽  
Oleg I. Siidra ◽  
...  

AbstractAkopovaite, ideally Li2Al4(OH)12(CO3)(H2O)3, is a new hydrotalcite-supergroup mineral from the Karasu–Karavshinskoye Sn deposit, Turkestan Range, Kyrgyzstan. It occurs as white or pale yellowish rosette-like aggregates that are composed of tiny curved plates up to 20–30 μm. Akopovaite is associated with gibbsite, quartz, albite, microcline, muscovite, montebrasite, siderite, schorl and birnessite-like Fe–Mn oxides. Akopovaite has a perfect cleavage along {001}, the mineral is transparent and very soft (VHN = 24 that corresponds to Mohs hardness of ca. 1). Dmeas = 2.12(2) g/cm3 and Dcalc = 2.106 g/cm3. The Raman spectra contain bands of carbonate groups and bands of O–H stretching vibrations. The chemical composition (wt.%, electron microprobe for Al and Fe; ICP-OES for Li; CHN method for CO2 and H2O) is Li2O 6.43, Al2O3 45.79, Fe2O3 0.27, CO2 10.09, H2O 36.1, total 98.68. The empirical formula based on (Li + Al + Fe) = 6 apfu is Li1.94(Al4.05Fe0.02)Σ4.07(OH)12(CO3)1.03(H2O)3.03. The crystal structure was refined by the Rietveld method with RB = 0.006 and Rwp = 0.014. Akopovaite is monoclinic, C2/m, a = 5.0953(6), b = 8.877(1), c = 7.806(1) Å, β = 102.572(6)°, V = 344.61(8) Å3 and Z = 1. The polytype should be denoted as 1M. The strongest lines of the powder X-ray diffraction pattern [d, Å (I, %) (hkl)] are: 7.66(100)(001), 4.397(27)(020), 3.821(45)(002,021), 2.4881(27)(200), 2.2273(16)(201) and 1.9027(18)(202). Akopovaite is the first naturally occurring hydrotalcite-supergroup carbonate species of Al and Li; its synthetic analogue is known.


Sign in / Sign up

Export Citation Format

Share Document