Cyclic Oxidation of Titanium Grade 2

This paper presents the results of research into the cyclic oxidation of titanium Grade 2. The value of titanium Grade 2 oxidation activation energy was determined based on an analysis of the Arrhenius diagram. The result was 205.3 kJ/mol. After cyclic oxidation at a temperature of 600 °C, the presence of oxides in an acicular system was observed on the surface. The specimen surface after oxidation at 650 °C was characterised by the presence of fine oxide particles, while after oxidation at 700 °C, the obtained oxide layer was composed of large oxide particles. The layers obtained after oxidation at 600 °C had the lowest thickness (1.26 and 2.12 µm), while those obtained at 700 °C had the highest thickness (5.17 and 9.45 µm). Examination of the phase composition after cyclic oxidation showed that the oxide layers obtained at temperatures of 600, 650 and 700 °C were composed of TiO2 (rutile) only. No presence of other phases was found. The oxide layers formed in the cyclic oxidation process were characterised by different thicknesses, depending on the oxidation parameters. It was found that cyclic oxidation contributed to a considerable increase in the surface hardness of titanium Grade 2.

Loss of 40Ar(rad) from leucite-bearing basanite at low temperature: implications on K/Ar dating.

The Bakony-Balaton Highland Volcanic Field (BBHVF) is located in the central part of Transdanubia, Pannonian Basin, with over 50 alkali basaltic volcanoes. The basanite plug of Hegyestu erupted in the first phase of volcanic activity. K/Ar and Ar/Ar ages were published for the BBHVF. K/Ar and Ar/Ar ages of the leucite-bearing basanite of Hegyestás were conflicting. This is caused by the special Ar retention feature of leucite in this basanite.K/Ar ages measured in the usual way were 25–45% younger, but after HCl treatment of the rock, or after reducing the baking temperature of the argon extraction line from 250°C to 150°C, they became similar to theAr/Ar ages. All Ar/Ar determinations were performed after HF treatment. HCl treatment dissolved olivine, nepheline, leucite, magnetite and from 1-1 sample analcime or calcite. K dissolution studies from different locations of Hegyestü have shown that K content is mostly ≈2%, but it may decrease to ≈0.3%. HCl treatment dissolved 28.0–63.5% of the K content. The calculated K concentration for the dissolved part of samples with ~2%K was 4.02-6.42%: showing that leucite is responsible for the low temperature loss of 40Ar(rad). Ar may release at low temperature from very finegrained mineral, or when the Ar release mechanism changes. A 40Ar(rad) degassing spectrum has been recorded in the 55–295°C range of baking temperature and the data were plotted in the Arrhenius diagram. The diagram shows that a change of the structure in the 145–295°C range caused the loss of 40Ar(rad). On fractions of HCl treated rock 7.56±0.17 Ma isochron K/Ar age has been determined. This is regarded as minimum age of eruption and it is similar to the Ar/Ar isochron age (7.78±0.07 Ma).

Thermal Degradation Studies of a Polyurethane Propellant Binder

The thermal oxidative aging of a crosslinked hydroxy-terminated polybutadiene (HTPB)/isophorone diisocyanate (IPDI) based polyurethane rubber, used as a polymeric binder in solid propellant grain, was investigated at temperatures from 25 to 125 °C. The changes in tensile elongation, polymer network properties and chain dynamics, mechanical hardening and density were determined with a range of techniques including modulus profiling, solvent swelling, NMR relaxation and O2 permeability measurements. We critically evaluated the Arrhenius methodology that is commonly used with a linear extrapolation of high temperature aging data using extensive data superposition and highly sensitive oxygen consumption experiments. The effects of other constituents in the propellant formulation on aging were also investigated. We conclude that crosslinking is the dominant process at higher temperatures and that the degradation involves only limited hardening in the bulk of the material. Significant curvature in the Arrhenius diagram of the oxidation rates was observed. This is similar to results for other rubber materials.