Suprascapular Nerve Entrapment by a Trifid Superior Transverse Scapular Ligament

Anatomical variations at the suprascapular notch may limit the available space for the suprascapular nerve (SSN), and cause its entrapment in the tight osseoligamentous tunnel. The author encountered the presence of a trifid superior transverse scapular ligament (STSL) while operating on a patient with SSN entrapment. Surgical division of the three bands resulted in complete regression of symptoms.

Letter to the Editor: Regarding “An Unusual Bilateral Duplication of the Suprascapular Vein and Its Relation to the Superior Transverse Scapular Ligament Revealed by Anatomage Table”

No abstract available.

MRI-Evaluation of Suprascapular Notch Morphometry and Its Clinical Applications

The suprascapular notch, a depression on the lateral part of the superior border of the scapula, medial to the coracoid process, is covered by the superior transverse scapular ligament, which is converted into a foramen. Sometimes it might be ossified forming a complete osseous foramen. The Suprascapular Notch (SN) served as a passage for the Suprascapular Nerve (SSN). Study the morphology of the suprascapular notch and the suprascapular transverse ligament based on MRI, variations in shape and dimensions of the suprascapular notch. A group of 100 patients underwent MRI examination of the scapular region through the period from 10th July 2019 to 15th Feb 2020. Different morphological types of the suprascapular notch were encountered in the study, the most common type was type III, while type I was less common in the study. The symmetry of the morphological feature of SN bilaterally was seen in 51% of the cases. Conclusively, the symmetry of the suprascapular notch is not a constant feature bilaterally.

Morphometry and Contents of the Suprascapular Notch with Potential Clinical Implications: Α Cadaveric Study

Background The suprascapular notch (SN) represents the point along the route of the suprascapular nerve (SSN) with the greatest potential risk for injury and compression. Thus, factors reducing the area of the notch have been postulated for suprascapular neuropathy development. Methods Thirty-one fresh-frozen shoulders were dissected. The contents of the SN were described according to four types as classified by Polguj et al and the middle-transverse diameter of the notch was measured. Also, the presence of an ossified superior transverse scapular ligament (STSL) was identified. Results The ligament was partially ossified in 8 specimens (25.8%), fully ossified in 6 (19.35%), and not ossified in the remaining 17 (54.85%). The mean middle-transverse diameter of the SN was 9.06 mm (standard deviation [SD] = 3.45). The corresponding for type-I notches was 8.64 mm (SD = 3.34), 8.86 mm (SD = 3.12) was for type-II, and 14.5 mm (SD = 1.02) was for type III. Middle-transverse diameter was shorter when an ossified ligament was present (mean = 5.10 mm, SD = 0.88 mm), comparing with a partially ossified ligament (mean =7.67 mm, SD = 2.24 mm) and a nonossified one (mean = 11.12 mm, SD = 2.92 mm). No statistically significant evidence was found that the middle-transverse diameter depends on the number of the elements, passing below the STSL. Conclusion Our results suggest that SSN compression could be more likely to occur when both suprascapular vessels pass through the notch. Compression of the nerve may also occur when an ossified transverse scapular ligament is present, resulting to significant reduction of the notch's area.

Morphometric study of suprascapular notch and scapular dimensions in Ugandan dry scapulae with specific reference to the incidence of completely ossified superior transverse scapular ligament

Background Understanding of suprascapular notch (SSN) anatomy and relationship with scapular dimensions are vital in diagnosis, prevention, and assessment of suprascapular nerve entrapment syndrome. The study aimed to assess morphometry of suprascapular notch and scapular dimensions in Ugandan dry scapulae with specific reference to scapulae with completely ossified superior transverse scapular ligaments. Methods This was a cross-sectional analytical study conducted on 50 Ugandan dry scapulae. SSN types and prevalence of completely ossified superior transverse scapular ligament among dry scapulae were quantified and compared with previous data. Scapular dimensions were assessed by measuring scapular length (A), scapular width (B), glenoid length (C), and glenoid width (D). One-way ANOVA was used to compare scapular dimensions of scapulae with different SSN types, and Spearman’s correlation coefficient was used to evaluate the correlation coefficient of scapular dimensions amongst groups. Results Superior transverse scapular ligament (STSL) was completely ossified in 8% of cases. There was no significant (P > 0.05) difference between scapular dimensions of scapulae with completely ossified STSL compared to scapulae with other SSN types. Scapulae with completely ossified STSL showed strong negative (r = − 0.89137, r = − 0.877) correlations for its A, B respectively compared against D, this finding was not true to scapulae of other SSN types. Also, there were strong positive or negative (r > 0.7, r > − 0.7) correlations: for A, types I and III compared to type VI; for B, types I, III compared to VI; for C, type IV and VI; and for D, type III and VI. Conclusions The prevalence of completely ossified STSL is moderately high in the Ugandan population. Characteristics of the scapula (scapular dimensions) are not ‘vital’ but rather important or relevant for shoulder pathology with specific reference to suprascapular nerve entrapment syndrome due to completely ossified superior transverse scapular ligaments. Further correlation analyses of scapular dimensions of different SSN types in different populations are important.

Morphometric study of suprascapular notch and scapular dimensions in Ugandan dry scapulae with specific reference to the incidence of completely ossified superior transverse scapular ligament

Background: Understanding of suprascapular notch (SSN) anatomy and relationship with scapular dimensions are vital in diagnosis, prevention, and assessment of suprascapular nerve entrapment syndrome. The study aimed to assess morphometry of suprascapular notch and scapular dimensions in Ugandan dry scapulae with specific reference to scapulae with completely ossified superior transverse scapular ligaments. Methods: This was a cross-sectional analytical study conducted on 50 Ugandan dry scapulae. SSN types and prevalence of completely ossified superior transverse scapular ligament among dry scapulae were quantified and compared with previous data. Scapular dimensions were assessed by measuring scapular length (A), scapular width (B), glenoid length (C), and glenoid width (D). One-way ANOVA was used to compare scapular dimensions of scapulae with different SSN types, and Spearman’s correlation coefficient was used to evaluate the correlation coefficient of scapular dimensions amongst groups. Results: Superior transverse scapular ligament (STSL) was completely ossified in 8% of cases. There was no significant (P > 0.05) difference between scapular dimensions of scapulae with completely ossified STSL compared to scapulae with other SSN types. Scapulae with completely ossified STSL showed strong negative (r = -0.89137, r = -0.877) correlations for its A, B respectively compared against D, this finding was not true to scapulae of other SSN types. Also, there were strong positive or negative (r > 0.7, r > -0.7) correlations: for A, types I and III compared to type VI; for B, types I, III compared to VI; for C, type IV and VI; and for D, type III and VI. Conclusions: The prevalence of completely ossified STSL is moderately high in the Ugandan population. Characteristics of the scapula (scapular dimensions) are not ‘vital’ but rather important or relevant for shoulder pathology with specific reference to suprascapular nerve entrapment syndrome due to completely ossified superior transverse scapular ligaments. Further correlation analyses of scapular dimensions of different SSN types in different populations are important.

Correlations of Scapular Dimensions: A Tool to Identify Scapulae with Completely Ossified Superior Transverse Scapular Ligaments and Suprascapular Neuropathy

Background. A better understanding of the anatomy of the suprascapular notch and relationship with scapular dimensions are vital in the diagnosis, prevention, and assessment of the suprascapular nerve (SN) entrapment syndrome. Our purposes were to classify the suprascapular notches, determine the prevalence of completely ossified superior transverse scapular ligament, scapular dimensions, and their relationship among the different types of the suprascapular notch (SSN). Methods: An experimental study in which the SSN types and scapular dimensions were determined using previous methods. Statistical analyses were done using GraphPad Prism v.6 and MS Excel Version 2019, one-way ANOVA was used to compare and Spearman’s correlation coefficient was used to evaluate the correlation of scapular dimensions. Results: The superior transverse scapular ligament (STSL) was completely ossified in 8% of cases. There were no significant differences between the scapular dimensions for the different SSN types. For type VI SSN there is a strong negative correlation between A, B against D. There are strong (positive or negative) correlations between types I and III from type VI for A-axis; types I, III from VI for B; type IV and VI for C axis; and type III and VI for D axis.Conclusions: The prevalence of the completely ossified STSL in our study was moderately high; the correlation studies suggest that the scapular dimensions could be a valuable tool in the prediction, diagnosis, prevention, and assessment of the SN neuropathy due to the scapulae with the completely ossified superior transverse scapular ligaments (type VI SSN). Further studies on correlation analyses of scapular dimensions and characteristics of suprascapular notches are vital.

A Study on Morphology of Suprascapular Notch with Specific Emphasis on Completely Ossified Superior Transverse Scapular Ligament

Background and Aim The superior border of scapula is marked by suprascapular notch which is bridged by suprascapular ligament. Beneath this ligament, passes the suprascapular nerve. Narrow notch and completely ossified superior transverse scapular ligament is one of the risk factors for suprascapular nerve entrapment. This study is done to study morphological variation of suprascapular notch. Knowledge of various types of suprascapular notch will help the clinician in early diagnosis and surgical treatment. Materials and Methods A total of 525 human scapulae of unknown age and sex were studied for morphology of suprascapular notch at the Department of Anatomy, GMERS medical college, Vadnagar and at B. J. Medical College, Ahmedabad. Photographs of various types of suprascapular notch were taken using digital camera and classified as per the Rengachary classification. Result In the present study, as per Rengachary classification, out of 525 scapulae, the most common is Type III (47.1%), least common is Type V (1.9%), and completely ossified superior transverse scapular ligament is Type VI (8.9%). Conclusion Knowledge of various types of suprascapular notch will help the physician in screening high-risk patients as well as diagnosis and treatment of suprascapular nerve entrapment disorder.