Analisa Konfigurasi Jaringan FTTH dengan Perangkat OLT Mini untuk Layanan Indihome di PT. Telkom Akses Witel Semarang

<p>The development of increasingly sophisticated technology follows the needs of the community, one of them in the telecommunications world is FTTH (Fiber to the Home) which is an optical signal delivery format from the center of the provider to the homes of costumers by using optical fiber as a medium of delivery. Delivery by using this FTTH technology can save costs and provide better service to customers. The study was conducted by interview and observation methods with network objects and FTTH components belonging to Telkom Semarang and through the literature method by searching some literature. FTTH configuration starts with the ONT to rosette connected using a patchcord cable then from rosette to OTP using an indoor cable then from OTP to ODP outside the home is connected using a dropcore cable. ODP itself is the result of the distribution of distribution cables/ aerial cables leading to ODC. ODC to STO/FTM/ODF using feeder cable. FTTH network is very effective to use, because it can use triple play services (telephone, internet and IPTV) with just 1ONT/ modem at the customer’s side.</p>

Analisis Perancangan Jaringan Fiber to The Home Area Universitas Nasional Blok IV dengan Optisystem

Researchers will be designing the access network Fiber To The Home (FTTH) on the technology of Gigabit Passive Optical Network (GPON). The location that became the case study was the National University of Block IV, where the network speed at the site was slightly reduced speed. The purpose is to get the design of an access service network that is expected to be implemented for triple play services. Starting with data collection of data. The Fiber To The Home (FTTH) network design determining device specification, layout and number of devices used and simulated using Optisystem application. Then in the analysis based on predefined parameters in the form of BER (Bit Error Rate), Link Power Budget, and Rise Time Budget that meet the optical network with the standard of PT. Telkom. The results of the BER value has fulfilled the minimum BER value specified for fiber optic is 10-9 and for parameter Q – Factor obtained value 9,32288 so that has been meets the standard because it shows values above 6

Optical splitter design for telecommunication access networks with triple-play services

In this paper, we present various designs of optical splitters for access networks, such as GPON and XG-PON by ITU-T with triple-play services (ie data, voice and video). The presented designs exhibit a step forward, compared to the solutions recommended by the ITU, in terms of performance in transmission systems using WDM. The quality of performance is represented by the bit error rate and the Q-factor. Besides the standard splitter design, we propose a new length-optimized splitter design with a smaller waveguide core, providing some reduction of non-uniformity of the power split between the output waveguides. The achieved splitting parameters are incorporated in the simulations of passive optical networks. For this purpose, the OptSim tool employing Time Domain Split Step method was used.