Evaluation of an occipito-cervico fusion with a new implant design: a biomechanical study

Background A novel implant for occipitocervical fusion consisting of a median plate with an additional hook inserting in the foramen magnum was tested. Aim of this study was to test the stability of a new implant for occipitocervical fusion against the already available and employed median plate implant without hook. Material and method 36 rigid polyurethane foams occipital artificial bones were used. The two occipital implants, namely the occipital plate with hook (Group 1) and the one without hook (Group 2), were applied to the artificial occiput trough three occipital screws and ensured into the experimental setup trough a crossbar. The test parameters were set using the testing machine software as follows: (1) test speed: 10 mm/ min, with 25 mm/ min maximum; (2) preload: 5 N; (3) force switch-off threshold: 90% force drop from F_max. Failure force and path were recorded. Failure force is defined as the maximum reaction force under which failure occurs (F_max), while failure path is the travel path during which failure occurs (dL). Results Group 1 (plate with hook) showed a mean failure force of 459.3 ± 35.9 N and a mean failure path of 5.8 ± 0.3 mm Group 2 (plate without hook) showed a mean failure force of 323.9 ± 20.2 N and a mean failure path of 7.2 ± 0.4 mm. The Shapiro-Wilk test score was not significant (P > 0.1), assuming that data were normally distributed. Group 1 had a statistically significant greater F_max (+ 135.37; P > 0.0001) and less dL (− 1.52; P > 0.0001) compared to group 2. Conclusions Medial plates with foramen magnum hooks showed to be more stable that plates without a hook. These new implants may represent a new tool in OCJ fixation, but further studies are required to investigate their behavior in an anatomical setting.

Description of a new species of Hisonotus (Loricariidae: Siluriformes) from rio Araguaia basin

A new species of Hisonotus is described from headwaters of rio Araguaia basin, municipality of Barra do Garças, Mato Grosso state, Brazil. The new species is distinguished from its congeners by a V-shaped spinelet, yellowish teeth, absence of unpaired platelets at typical adipose fin position, the caudal-fin color hyaline with three transverse dark bars, one abdominal median plate series, and by morphometric and meristic characters.

Chinja, a new genus of spider from the Eastern Arc Mountains of Tanzania (Araneae, Zoropsidae)

The new zoropsid spider genus Chinja Polotow & Griswold is diagnosed and described and the following two new species are described: C. chinja sp. nov. and C. scharffi sp. nov. The species were collected in the Eastern Arc Mountains of Tanzania and appear to be endemic to this region. The genus belongs to the oval-calamistrum clade (OC Clade), which also includes Dionycha and Lycosoidea. Based on the synapomorphies and diagnostic characters of members of the OC Clade, Chinja is considered a member of Zoropsidae, although without a clear subfamily placement due to insufficient data. Males of Chinja can be distinguished from other Zoropsidae by a straight PER, by lacking a tibial crack, by having a male palpal cymbium with a retrobasal process and the male palpal tibia with an RTA and a retromedian cluster of stout setae. Females have a divided cribellum with cribellar spigots evenly arranged, and the epigynum with the median plate broad and laterally procurved into hooks, and the lateral lobes each with a wide tooth. The following set of characters can be also helpful to identify the genus: presence of a third tarsal claw, absence of claw tufts and presence of a cribellum and calamistrum.

Redescription of Paradiplozoon hemiculteri (Monogenea, Diplozoidae) from the type host Hemiculter leucisculus, with neotype designation

Paradiplozoon hemiculteri (Ling, 1973), a member of the Diplozoidae, parasitizes the gills of Asian fish. Not only is the type material unavailable for this species, the original description was poor and somewhat conflicting, and adequate molecular data were not available. What is more, the available morphological and molecular data are inconsistent and fluctuate significantly. Here, we present a redescription of P. hemiculteri based on morphological and molecular data from new isolates collected from the type host, the sharpbelly Hemiculter leucisculus (Basilewsky, 1855), captured at the neotype locality (Shaoguan, Guangdong Province, southern China); a neotype for P. hemiculteri was designated from this collection. The length and width of the body, buccal suckers, pharynx, attachment clamps, sickle and the central hook handle were all measured and the shape of the anterior and posterior part of the median plate and anterior and posterior joining sclerites accurately documented. Phylogenetic analyses based on the sequences of the second rDNA internal transcribed spacer (ITS2) indicated that all new samples clustered together and differed clearly from sequences attributed to P. hemiculteri, which are deposited in GenBank. Our results confirm that P. hemiculteri is the only diplozoid that has demonstrably been found on the gills of H. leucisculus to date.

Paradiplozoon yunnanensis n. sp. (Monogenea, Diplozoidae) from Sikukia gudgeri (Cyprinidae, Barbinae) in southwest China

Paradiplozoon yunnanensis n. sp. (Monogenea, Diplozoidae) is described from the gills of Sikukia gudgeri Smith, 1931 (Cyprinidae) collected from Jinghong Basin, a tributary of the international Lancang-Mekong River. This is the first diplozoid species from S. gudgeri and its description increases the number of Paradiplozoon species recorded in China to 25. The new species is distinguished from congeners by a combination of morphological and molecular features. The anterior end of the median plate is thickened in the marginal area and a narrow rectangular trapeze spur connects to the anterior jaw through two separate anterior joining sclerites. The posterior end of the median plate sclerite is invaginated with a smooth strip-shaped posterior joining sclerite. Comparison of a newly obtained sequence of rRNA ITS2 with 18 other congeneric sequences from GenBank provides support for separation of the new species.

Bryochoerus liupanensis sp. nov. and Pseudechiniscus chengi. sp. nov. (Tardigrada: Heterotardigrada: Echiniscidae) from China

Two new species from China, Bryochoerus liupanensis sp. nov. and Pseudechiniscus chengi sp. nov. (Tardigrada: Heterotardigrada: Echiniscidae), are reported. Bryochoerus liupanensis sp. nov. is characterized by median plates 1 and 2 divided into four parts while median plate 3 is divided into three parts, and by two lateral plates on each side of all median plates. The new species differs from Bryochoerus intermedius in having a different cuticular sculpture and different lateral plates. Pseudechiniscus chengi sp. nov. is characterized by: head plate faceted, cephalic papilla dome-shaped, pseudosegmental plate with a longitudinal median fold, all plates including the dorsal plates and plates on legs with ornamentation composed of dense round dots, differing in size, and lacking striae between the dots. Pseudechiniscus chengi sp. nov. is most similar to Pseudechiniscus santomensis but differs by: lacking striae between the round dots on dorsal plates, lacking the tiny projections on the caudal margin of pseudosegmental plate, and the divided pseudosegmental plate.

Rectoris longibarbus, a new styglophic labeonine species (Teleostei: Cyprinidae) from South China, with a note on the taxonomy of R. mutabilis (Lin 1933)

Rectoris longibargus, new species, is here described from the Zuo–Jiang of the Pearl River drainage at Jinxi County,Guangxi Province, China. It is distinct from all other congeners in the rostral barbel length and the structure of the gas-bladder. Rectoris longibarbus is further distinguished from R. posehensis by having a slightly papillated posteromedianpatch on the median plate of the lower lip, and from R. mutabilis, as here understood, by having a longitudinal black striperunning along the lateral line on the flank. Taxonomic problems with R. mutabilis are also addressed; it is regarded to bea senior synonym of R. luxiensis. The type locality of R. mutabilis is likely in the Yuan–Jiang (a tributary of the middleYangtze River drainage) in Guizhou Province. The species currently recognized as R. mutabilis is previously unnamed, and possibly represents an undescribed genus.

Rhinolekos, a new genus with three new species of Hypoptopomatinae (Siluriformes: Loricariidae) from upper rio Paraná

Rhinolekos, new genus, and three new species, R. britskii, R. garavelloi, and R. schaeferi, are described from rio Paranaíba, upper rio Paraná drainage, central Brazil. Rhinolekos can be diagnosed by the following combination of characters: anterior portion of the compound supraneural-first dorsal-fin proximal radial contacting the neural spine of the 9th or 10th vertebrae; presence of the lateronasal plate; absence of the median rostral plate; presence of the pectoral-fin axillary slit just in juvenile specimens; ventral surface of pectoral girdle exposed only laterally; arrector fossae partially enclosed, with opening relatively large, extending laterally halfway towards pectoral-fin base; paired anterior process of the compound supraneural-first dorsalfin proximal radial bone absent; median plate series continuous to the caudal-fin origin; iris operculum present; pteroticsupracleithrum quadrangular in shape and not extending posteriorly; supraoccipital not contributing to the dorsal portion of the swimbladder capsule; subopercular plate present; dorsal and ventral margins of snout bearing odontodes roughly equivalent in size and shape to those on remainder of the head; caudal peduncle roughly rounded in cross section; longitudinal crests in supraoccipital absent; fourth infraorbital expanded ventrally.

Microlepidogaster dimorpha, a new species of Hypoptopomatinae (Siluriformes: Loricariidae) from the upper rio Paraná system

Microlepidogaster dimorpha, new species, is described from tributaries of rio Grande, upper rio Paraná system. Microlepidogaster dimorpha differs from M. perforatus and M. longicolla by having first dorsal-fin proximal radial attached to the neural spine of seventh vertebra, with posterior portion contacting also the eighth centrum (vs. first dorsal-fin proximal radial attached to the neural spine of eighth or ninth vertebra in M. perforatus, and to the neural spine of tenth or eleventh vertebra in M. longicolla); 29-30 vertebrae (vs. 31 in M. perforatus and 31-33 in M. longicolla); 18-21 mid-dorsal plates (vs. 9-13 in M. perforatus, and 13-17 in M. longicolla); deeper caudal peduncle (10.0-11.4% in SL vs. 7.7-8.5% in M. perforatus, and 5.4-7.3% in M. longicolla); greater distance between dorsal-fin origin and anal-fin insertion (19.4-23.8% in SL vs. 16.4-18.8% in M. perforatus, and 14.7-16.2% in M. longicolla); and nostril width markedly wider in males than in females (vs. approximately equivalent in size for both sexes, slightly wider in males than in females in M. perforatus, and equivalent in size for both sexes in M. longicolla). Microlepidogaster dimorpha also differs from M. perforatus by presence of the iris operculum (vs. absence); median plate series complete to caudal peduncle end (vs. median plate series truncated, with last two plates of dorsal and ventral series contacting in midline); greater head depth (43.4-53.1% vs. 40.7-42.3% in HL); greater orbital diameter (13.6-18.5% vs. 11.1-13.5% in HL); pelvic-fin first unbranched ray longer in males than in females (vs. equivalent in size in both sexes); and supraneural without paired anterior processes (vs. processes present). Additionally, M. dimorpha can be distinguished from M. longicolla by having anterior margin of snout with a paired rostral plate (vs. snout with small plates, naked in the anterior margin); by pectoral-fin axillary slit present, even in adult specimens (vs. pectoral-fin axillary slit present only in juvenile specimens); longer pectoral-fin unbranched ray (20.0-23.8% vs. 13.4-16.2% in SL in M. longicolla).

A new species of Alpaida (Araneae, Araneidae) from Caxiuanã National Forest, Oriental Amazonia, Brazil

Alpaida guto n. sp. is described based on males and females from State of Pará, Brazil. This species appears to be the most abundant Alpaida O. P.-Cambridge, 1889 species in Caxiuanã National Forest, eastern Amazonia. The males seem to be close to A. antonio Levi, 1988 but can be easily distinguished by the terminal apophysis with rounded distal lobe and long, slender basal prong; females differ from those of A. yotoco Levi, 1988 by the median lobe with a basal constriction and by the bilobed median plate.