Adsorptive Removal of Cd(II) Ions from Wastewater Using Maleic Anhydride Nanocellulose

In this study, both pristine cellulose nanocrystalline (CNC) and maleic anhydride functionalized cellulose nanocrystalline (MA-CNC) were prepared from the stems of Eichhornia crassipes weed by the sulfuric acid hydrolysis method. The as-prepared adsorbents were characterized by using X-ray diffraction (XRD), Fourier-transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), energy-dispersive X-ray (EDX), and Brunauer–Emmett–Teller (BET) instruments. These materials were applied for the removal of Cd(II) ions from WW. The uptake mechanism was fixed to both Langmuir and Freundlich adsorption isotherms with a maximum Cd(II) ion uptake capability (qmax) of 75.76 and 215.52 mg g−1 by CNC and MA-CNC adsorbents, respectively. Pseudo-second-order (PSO) kinetic model was well fitted to the uptake process. The adsorbent regeneration study was done after desorption of Cd(II) ions from the adsorbent by HCl washing. Results exhibited that the adsorbent was reused for the removal of Cd(II) ions from real WW after successive 13th cycle.

Preparation and Characterization of Functionalized Cellulose Nanomaterials (CNMs) for Pb(II) Ions Removal from Wastewater

Due to their remarkable properties, cellulose nanomaterials are emerging materials for wastewater (WW) treatment. In this study, both pristine cellulose nanomaterial (CNM) and sodium periodate modified cellulose nanomaterial (NaIO4-CNM) were prepared from the stem of the Erythrina brucei plant for the removal of Pb(II) ions from WW. As-prepared CNMs were characterized by X-ray diffraction (XRD), Fourier transform infrared (FT-IR), scanning electron microscope (SEM), and thermogravimetric analysis with differential thermogravimetry (TGA-DTG) analysis. The as-prepared and characterized CNMs were tested for the removal of Pb(II) ions from secondary run-off wastewater (SERWW). Langmuir and Freundlich adsorption isotherms were certainly fixed to a maximum Pb(II) ions uptake capability (Qmax) of 91.74 and 384.62 mg g−1 by CNM and NaIO4-CNM adsorbents, respectively. The pseudo-second-order (PSO) kinetics model was well fitted to the uptake process. Results revealed that the percentage removal (%R) of Pb(II) ions was decreased by the presence of nitrogen and organic matter, but not affected by the presence of phosphorous in SERWW. Due to its high efficiency, NaIO4-CNM was selected for the regeneration study. The regeneration study was conducted after desorption of Pb(II) ions from the adsorbent by the addition of HCl, and the regenerated sorbent was reused as an adsorbent for at least 13 successive cycles. The results indicated excellent recycling capabilities, and the adsorbent was used as adsorbing material for the removal of Pb(II) ions from SERWW after 13 successive cycles without significant efficient loss.

Alkali-Activated Adsorbents from Slags: Column Adsorption and Regeneration Study for Nickel(II) Removal

Alkali-activated adsorbents were synthesized by mixing three different slags from the steel industry: blast furnace slag (BFS), ladle slag (LS), and Lintz–Donawitz converter slag (LD). These powdered slag-based geopolymers (GP) were used to remove nickel(II) from aqueous solutions in fixed-bed column studies. The experiments were conducted in pH 6 using a phosphate buffer with initial nickel(II) concentration of 50 mg/L. Samples were taken at time intervals of between 5 and 90 min. Three adsorption–desorption cycles were implemented with a flow rate of 5 mL/min. The geopolymers were characterized by Fourier-Transform Infrared Spectroscopy (FTIR), X-ray powder diffraction (XRD), Field Emission Scanning Electron Microscopy (FESEM), X-ray fluorescence (XRF), specific surface area measurements, and a leaching test. The data were found to describe the Thomas, Adams–Bohart, and Yoon–Nelson models well. For GP (BFS, LS), experimental adsorption capacity was 2.92 mg/g, and for GP (LD, BFS, LS), it was 1.34 mg/g. The results indicated that the produced adsorbents have the potential to be used as adsorbents for the removal of nickel(II).