Structure Evolution and Oxidation Resistance of Pyrolytic Carbon Derived from FE Doped Phenol Resin

Considerable effort has been directed toward an improved understanding of the production of the strong and stiff ∼ 1-20 μm diameter pyrolytic carbon fibers of the type reported by Koyama and, more recently, by Tibbetts. These macroscopic fibers are produced when pyrolytic carbon filaments (∼ 0.1 μm or less in diameter) are thickened by deposition of carbon during thermal decomposition of hydrocarbon gases. Each such precursor filament normally lengthens in association with an attached catalyst particle. The subject of filamentous carbon formation and much of the work on characterization of the catalyst particles have been reviewed thoroughly by Baker and Harris. However, identification of the catalyst particles remains a problem of continuing interest. The purpose of this work was to characterize the microstructure of the pyrolytic carbon filaments and the catalyst particles formed inside stainless steel and plain carbon steel tubes. For the present study, natural gas (∼; 97 % methane) was passed through type 304 stainless steel and SAE 1020 plain carbon steel tubes at 1240°K.

Download Full-text

Morphologies of Nonadherent Al2O3 and Matching Substrate Surfaces

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s042482010009587x ◽

1972 ◽

Vol 30 ◽

pp. 524-525

Author(s):

C. S. Giggins ◽

J. K. Tien ◽

B. H. Kear ◽

F. S. Pettit

Keyword(s):

Electron Microscopy ◽

Oxide Scale ◽

Oxidation Resistance ◽

Substrate Surface ◽

Morphological Features ◽

Thermally Induced ◽

Oxide Spallation ◽

Oxidation Resistant ◽

Induced Stresses ◽

Substrate Surfaces

The performance of most oxidation resistant alloys and coatings is markedly improved if the oxide scale strongly adheres to the substrate surface. Consequently, in order to develop alloys and coatings with improved oxidation resistance, it has become necessary to determine the conditions that lead to spallation of oxides from the surfaces of alloys. In what follows, the morphological features of nonadherent Al2O3, and the substrate surfaces from which the Al2O3 has spalled, are presented and related to oxide spallation.The Al2O3, scales were developed by oxidizing Fe-25Cr-4Al (w/o) and Ni-rich Ni3 (Al,Ta) alloys in air at 1200°C. These scales spalled from their substrates upon cooling as a result of thermally induced stresses. The scales and the alloy substrate surfaces were then examined by scanning and replication electron microscopy.The Al2O3, scales from the Fe-Cr-Al contained filamentary protrusions at the oxide-gas interface, Fig. 1(a). In addition, nodules of oxide have been developed such that cavities were formed between the oxide and the substrate, Fig. 1(a).

Download Full-text

Alterations of ultrastructure and elemental composition in cultured human epidermal keratinocytes after treatment with nitrofurazone and silver sulfadiazine

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100127803 ◽

1987 ◽

Vol 45 ◽

pp. 676-677

Author(s):

A. R. Crooker ◽

M. C. Myers ◽

T. L. Beard ◽

E. S. Graham

Keyword(s):

Electron Microscopy ◽

Elemental Composition ◽

Pyrolytic Carbon ◽

Human Keratinocytes ◽

Silver Sulfadiazine ◽

Epidermal Keratinocytes ◽

Human Epidermal Keratinocytes ◽

Culture Systems ◽

Cytotoxicity Endpoints

Cell culture systems have become increasingly popular as a means of screening toxic agents and studying toxic mechanisms of drugs and other chemicals at the cellular and subcellular levels. These in vitro tests can be conducted rapidly in a broad range of relevant mammalian culture systems; a variety of biological and biochemical cytotoxicity endpoints can be examined. The following study utilized human keratinocytes to evaluate the relative cytotoxicities of nitrofurazone (NF) and silver sulfadiazine (SS), the active ingredients of FURACIN(R) Topical Cream and SILVADENE(R) Cream, respectively. These compounds are anti-infectives used in the treatment of burn patients. Cell ultrastructure and elemental composition were utilized as cytotoxicity endpoints.Normal Human Epidermal Keratinocytes (HK) were prepared from the EpiPackTM culture system (Clonetics Corporation, Boulder, CO). For scanning electron microscopy (SEM) and transmission electron microscopy (TEM), cells were seeded on sterile 35 mm Falcon plastic dishes; for elemental microanalysis, cells were plated on polished pyrolytic carbon discs (E. Fullam, Latham, NY) placed in the culture dishes.

Download Full-text

Phase transformation and layer evolution in molybdenum disilicide-silicon carbide nanolayered coatings

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100170426 ◽

1994 ◽

Vol 52 ◽

pp. 538-539

Author(s):

H. Kung ◽

T. R. Jervis ◽

J.-P. Hirvonen ◽

M. Nastasi ◽

T. E. Mitchell ◽

...

Keyword(s):

Phase Transformation ◽

High Temperature ◽

Oxidation Resistance ◽

Elevated Temperatures ◽

Matrix Material ◽

Molybdenum Disilicide ◽

High Temperature Strength ◽

Cross Sectional ◽

Good Oxidation Resistance ◽

Structural Applications

MoSi2 is a potential matrix material for high temperature structural composites due to its high melting temperature and good oxidation resistance at elevated temperatures. The two major drawbacksfor structural applications are inadequate high temperature strength and poor low temperature ductility. The search for appropriate composite additions has been the focus of extensive investigations in recent years. The addition of SiC in a nanolayered configuration was shown to exhibit superior oxidation resistance and significant hardness increase through annealing at 500°C. One potential application of MoSi2- SiC multilayers is for high temperature coatings, where structural stability ofthe layering is of major concern. In this study, we have systematically investigated both the evolution of phases and the stability of layers by varying the heat treating conditions.Alternating layers of MoSi2 and SiC were synthesized by DC-magnetron and rf-diode sputtering respectively. Cross-sectional transmission electron microscopy (XTEM) was used to examine three distinct reactions in the specimens when exposed to different annealing conditions: crystallization and phase transformation of MoSi2, crystallization of SiC, and spheroidization of the layer structures.

Download Full-text