scholarly journals Seasonal freeze-thaw cycles and permafrost degradation on Mt. Zugspitze (German/Austrian Alps) revealed by single-station seismic monitoring

2021 ◽  
Author(s):  
Fabian Lindner ◽  
Joachim Wassermann ◽  
Heiner Igel
2021 ◽  
Author(s):  
Riccardo Scandroglio ◽  
Till Rehm ◽  
Jonas K. Limbrock ◽  
Andreas Kemna ◽  
Markus Heinze ◽  
...  

<p>The warming of alpine bedrock permafrost in the last three decades and consequent reduction of frozen areas has been well documented. Its consequences like slope stability reduction put humans and infrastructures at high risk. 2020 in particular was the warmest year on record at 3000m a.s.l. embedded in the warmest decade.</p><p>Recently, the development of electrical resistivity tomography (ERT) as standard technique for quantitative permafrost investigation allows extended monitoring of this hazard even allowing including quantitative 4D monitoring strategies (Scandroglio et al., in review). Nevertheless thermo-hydro-mechanical dynamics of steep bedrock slopes cannot be totally explained by a single measurement technique and therefore multi-approach setups are necessary in the field to record external forcing and improve the deciphering of internal responses.</p><p>The Zugspitze Kammstollen is a 850m long tunnel located between 2660 and 2780m a.s.l., a few decameters under the mountain ridge. First ERT monitoring was conducted in 2007 (Krautblatter et al., 2010) and has been followed by more than one decade of intensive field work. This has led to the collection of a unique multi-approach data set of still unpublished data. Continuous logging of environmental parameters such as rock/air temperatures and water infiltration through joints as well as a dedicated thermal model (Schröder and Krautblatter, in review) provide important additional knowledge on bedrock internal dynamics. Summer ERT and seismic refraction tomography surveys with manual and automated joints’ displacement measurements on the ridge offer information on external controls, complemented by three weather stations and a 44m long borehole within 1km from the tunnel.</p><p>Year-round access to the area enables uninterrupted monitoring and maintenance of instruments for reliable data collection. “Precisely controlled natural conditions”, restricted access for researchers only and logistical support by Environmental Research Station Schneefernerhaus, make this tunnel particularly attractive for developing benchmark experiments. Some examples are the design of induced polarization monitoring, the analysis of tunnel spring water for isotopes investigation, and the multi-annual mass monitoring by means of relative gravimetry.</p><p>Here, we present the recently modernized layout of the outdoor laboratory with the latest monitoring results, opening a discussion on further possible approaches of this extensive multi-approach data set, aiming at understanding not only permafrost thermal evolution but also the connected thermo-hydro-mechanical processes.</p><p> </p><p> </p><p>Krautblatter, M. et al. (2010) ‘Temperature-calibrated imaging of seasonal changes in permafrost rock walls by quantitative electrical resistivity tomography (Zugspitze, German/Austrian Alps)’, Journal of Geophysical Research: Earth Surface, 115(2), pp. 1–15. doi: 10.1029/2008JF001209.</p><p>Scandroglio, R. et al. (in review) ‘4D-Quantification of alpine permafrost degradation in steep rock walls using a laboratory-calibrated ERT approach (in review)’, Near Surface Geophysics.</p><p>Schröder, T. and Krautblatter, M. (in review) ‘A high-resolution multi-phase thermo-geophysical model to verify long-term electrical resistivity tomography monitoring in alpine permafrost rock walls (Zugspitze, German/Austrian Alps) (submitted)’, Earth Surface Processes and Landforms.</p>


2013 ◽  
Vol 7 (4) ◽  
pp. 1303-1314 ◽  
Author(s):  
H. Nagai ◽  
K. Fujita ◽  
T. Nuimura ◽  
A. Sakai

Abstract. To understand the formation conditions of debris-covered glaciers, we examined the dimension and shape of debris-covered areas and potential debris-supply (PDS) slopes of 213 glaciers in the Bhutan Himalaya. This was undertaken using satellite images with 2.5 m spatial resolution for manual delineation of debris-covered areas and PDS slopes. The most significant correlation exists between surface area of southwest-facing PDS slopes and debris-covered area. This result suggests that the southwest-facing PDS slopes supply the largest quantity of debris mantle. The shape of debris-covered areas is also an important variable, quantitatively defined using a geometric index. Elongate or stripe-like debris-covered areas on north-flowing glaciers are common throughout the Bhutan Himalaya. In contrast, south-flowing glaciers have large ablation zones, entirely covered by debris. Our findings suggest that this difference is caused by effective diurnal freeze–thaw cycles rather than seasonal freeze–thaw cycles, permafrost degradation, or snow avalanches. In terms of geographic setting, local topography also contributes to glacier debris supply and the proportion of debris cover on the studied glaciers is suppressed by the arid Tibetan climate, whereas the north-to-south asymmetric topography of the Bhutan Himalaya has less influence on the proportion of debris cover.


2019 ◽  
Author(s):  
Eike Reinosch ◽  
Johannes Buckel ◽  
Jie Dong ◽  
Markus Gerke ◽  
Jussi Baade ◽  
...  

Abstract. Climate change and the associated rise in air temperature have affected the Tibetan Plateau to a significantly stronger degree than the global average over the past decades. This has caused deglaciation, permafrost degradation and increased precipitation, heavily changing the water balance of this region. Surface displacement processes are likely to change as the ground continues to warm up and as such it is vital to understand both seasonal and interannual processes dynamics. The Nam Co area is well suited to studying these processes via Interferometric Synthetic Aperture Radar (InSAR) time series analysis, due to its lack of higher vegetation and relatively thin snow cover. The short revisit time of the Sentinel-1 system further reduces the risk of temporal decorrelation, making it possible to produce surface displacement models with good spatial coverage. We created three different surface displacement models to study freeze-thaw processes, seasonal sliding and linear creep. Most slopes of the area are unstable, with velocities of 8 to 17 mm yr−1, and some landforms reach velocities of up to 18 cm yr−1. The monsoonal climate accelerates those movements during the summer months through high temperatures and heavy rainfall. The fastest moving landforms, some of which have been identified as rock glaciers, do not follow this seasonal pattern of accelerated velocity in summer, instead they follow a linear sliding pattern. It is unclear if this linearity is connected to the ice content in those landforms. Flat regions at Nam Co are mostly stable on a multiannual scale but some experience subsidence, which could be caused by permafrost degradation. We observe a very clear seasonal freeze-thaw cycle in the valleys, where thawing and subsequent freezing of the active layer cause a vertical oscillation of the ground of up to a few centimeters, especially near streams and other water bodies.


2019 ◽  
Author(s):  
Junfeng Wang ◽  
Qingbai Wu ◽  
Ziqiang Yuan ◽  
Hojeong Kang

Abstract. Freezing and thawing action of the active layer plays a significant role in soil respiration (Rs) in permafrost regions. However, little is known about how the freeze-thaw process regulates the Rs dynamics in different stages for the alpine meadow underlain by permafrost on the Qinghai-Tibet Plateau (QTP). We conducted continuous in-situ measurements of Rs and freeze-thaw process of the active layer at an alpine meadow site in the Beiluhe permafrost region of QTP to determine the regulatory mechanisms of the different freeze-thaw stages of the active layer on the Rs. We found that the freezing and thawing process of active layer modified the Rs dynamics differently in different freeze-thaw stages. The mean Rs ranged from 0.56 to 1.75 μmol/m2s across the stages, with the lowest value in the SW stage and highest value in the ST stage; and Q10 among the different freeze-thaw stages changed greatly, with maximum (4.9) in the WC stage and minimum (1.7) in the SW stage. Patterns of Rs among the ST, AF, WC, and SW stages differed, and the corresponding contribution percentages of cumulative Rs to annual total Rs were 61.54, 8.89, 18.35, and 11.2 %, respectively. Soil temperature (Ts) was the most important driver of Rs regardless of soil water status in all stages. Our results suggest that as the climate warming and permafrost degradation continue, great changes in freeze-thaw process patterns may trigger more Rs emissions from this ecosystem because of prolonged ST stage.


2018 ◽  
Vol 252 ◽  
pp. 10-17 ◽  
Author(s):  
Weichao Guo ◽  
Hongyan Liu ◽  
Oleg A. Anenkhonov ◽  
Huailiang Shangguan ◽  
Denis V. Sandanov ◽  
...  

2020 ◽  
Vol 14 (9) ◽  
pp. 2835-2848
Author(s):  
Junfeng Wang ◽  
Qingbai Wu ◽  
Ziqiang Yuan ◽  
Hojeong Kang

Abstract. Freezing and thawing action of the active layer plays a significant role in soil respiration (Rs) in permafrost regions. However, little is known about how the freeze–thaw processes affect the Rs dynamics in different stages of the alpine meadow underlain by permafrost in the Qinghai–Tibet Plateau (QTP). We conducted continuous in situ measurements of Rs and freeze–thaw processes of the active layer at an alpine meadow site in the Beiluhe permafrost region of the QTP and divided the freeze–thaw processes into four different stages in a complete freeze–thaw cycle, comprising the summer thawing (ST) stage, autumn freezing (AF) stage, winter cooling (WC) stage, and spring warming (SW) stage. We found that the freeze–thaw processes have various effects on the Rs dynamics in different freeze–thaw stages. The mean Rs ranged from 0.12 to 3.18 µmol m−2 s−1 across the stages, with the lowest value in WC and highest value in ST. Q10 among the different freeze–thaw stages changed greatly, with the maximum (4.91±0.35) in WC and minimum (0.33±0.21) in AF. Patterns of Rs among the ST, AF, WC, and SW stages differed, and the corresponding contribution percentages of cumulative Rs to total Rs of a complete freeze–thaw cycle (1692.98±51.43 g CO2 m−2) were 61.32±0.32 %, 8.89±0.18 %, 18.43±0.11 %, and 11.29±0.11 %, respectively. Soil temperature (Ts) was the most important driver of Rs regardless of soil water status in all stages. Our results suggest that as climate change and permafrost degradation continue, great changes in freeze–thaw process patterns may trigger more Rs emissions from this ecosystem because of a prolonged ST stage.


2013 ◽  
Vol 7 (2) ◽  
pp. 1673-1705
Author(s):  
H. Nagai ◽  
K. Fujita ◽  
T. Nuimura ◽  
A. Sakai

Abstract. To understand the formation conditions of debris-covered glaciers, we examined the dimension and shape of debris-covered areas and potential debris-supply (PDS) slopes of 208 glaciers in the Bhutan Himalaya. This was undertaken using satellite images with 2.5 m spatial resolution for manual delineation of debris-covered areas and PDS slopes. The most significant correlation exists between surface area of southwest-facing PDS slopes and debris-covered area. This result suggests that the southwest-facing PDS slopes supply the largest quantity of debris mantle. The shape of debris-covered areas is also an important variable quantitatively defined using a geometric index. Elongate or stripe-like debris-covered areas on north-flowing glaciers are common throughout the Bhutan Himalaya, associated with the small quantities of debris from north-facing PDS slopes. In contrast, south-flowing glaciers have large ablation zones, entirely covered by debris. Our findings suggest that this difference is caused by effective diurnal freeze–thaw cycles rather than seasonal freeze–thaw cycles, permafrost degradation, or snow avalanches. In terms of geographic setting, local topography also contributes to glacier debris supply and the proportion of debris cover on the studied glaciers is suppressed by the arid Tibetan climate, whereas the north-to-south asymmetric topography of the Bhutan Himalaya has less influence on the proportion of debris cover.


2020 ◽  
Vol 224 (2) ◽  
pp. 813-824
Author(s):  
E Diego Mercerat ◽  
Jean Baptiste Payeur ◽  
Etienne Bertrand ◽  
Marie Malascrabes ◽  
Michel Pernoud ◽  
...  

SUMMARY We report here an interesting case study of dynamic characterization of a limestone sea cliff area, named the Sutta-Rocca overhang, located near the medieval town of Bonifacio (southern Corsica, France). The site belongs to an UNESCO protected area with an important number of visitors per year. Therefore, it is of particular interest to evaluate the potential rockfall hazard along the cliff. With the objective of evaluating the feasibility of an operational technique to monitor the cliff using ambient vibrations, two seismic stations were installed during six months (from 2016 November to 2017 April) in order to identify and monitor the resonant frequencies of the a priori unstable rock mass. Several techniques of classical seismic monitoring are tested on the site: single-station spectral analysis for identification of frequency peaks related to the unstable mass, relative spectral amplifications between stations and the operational modal analysis of the cliff. In particular, data analysis from a temporary campaign of two days of continuous recordings by a linear array of seismometers perpendicular to the sea cliff highlights the main characteristics of the ground motion: the overall motion of the promontory mainly in the north–south direction (perpendicular to the coast) and bending vertical and parallel to the cliff (east–west direction) at higher frequencies. The strong vertical and east–west seismic amplifications are also confirmed by the analysis of five local seismic events recorded at both semi-permanent stations. Even if ambient vibrations and seismic data analysis allows to decipher the dynamics of the Sutta-Rocca overhang, we conclude that classical seismic monitoring of just one single frequency peak with a limited number of sensors is not recommended for this particular site.


Sign in / Sign up

Export Citation Format

Share Document