An anomalous course of the reduction of 2-(3-oxo-3,4-dihydro-quinoxalin-2-yl)benzene diazonium salt. Synthesis of a new quinoxalino[1,2-c][1,2,3]benzotriazine system

2003 ◽  
Vol 40 (2) ◽  
pp. 357-358 ◽  
Author(s):  
Iveta Wiedermannová ◽  
Jan Slouka ◽  
Otakar Humpa ◽  
Karel Lemr
2012 ◽  
Vol 576 ◽  
pp. 314-317
Author(s):  
Sinin Hamdan ◽  
M. Saiful Islam

Five types of selected tropical light hardwoods were chemically modified with benzene diazonium salt to improve their physical and mechanical properties. Benzene diazonium salt underwent a coupling reaction with wood which was confirmed through FT-IR analysis. The compressive modulus of the treated wood increased, whereas modulus of rupture was shown to decrease on treatment. The modified wood samples had higher hardness (Shore D) values compared to that of the control ones.


BioResources ◽  
2011 ◽  
Vol 6 (1) ◽  
pp. 737-750 ◽  
Author(s):  
Md. Saiful Islam ◽  
Sinin Hamdan ◽  
Md. Rezaur Rahman ◽  
I. Jusoh ◽  
Abu Saleh Ahmed ◽  
...  

In this study the tropical light hardwood species jelutong (Dyera costulata), terbulan(Endospermum diadenum), batai (Paraserianthes moluccana), rubberwood (Hevea brasiliensis), and pulai (Alstonia pneumatophora) were treated with benzene diazonium salt to improve their dynamic Young’s modulus (Ed), and thermal stability. Benzine diazonium salt reacted with cellulose in wood and produced 2,6-diazocellulose by a coupling reaction, as confirmed by Fourier transform infrared (FTIR) spectroscopy. Values of Ed were calculated from the free-free flexural vibration method and found to increase on treatment. The morphological properties were studied by FTIR and scanning electron microscopy (SEM) and found to be changed. Thermal properties of treated wood samples were evaluated by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The treated wood samples exhibited an increased thermal stability relative to the untreated wood samples; this increase may be related to the formation of 2, 6-diazo cellulose compound.


Pteridines ◽  
1997 ◽  
Vol 8 (3) ◽  
pp. 188-194 ◽  
Author(s):  
Takashi Sugimoto ◽  
Chihiro Seo ◽  
Shizuaki Murata ◽  
Wolfgang Pfleiderer

Summary A new method to introduce an aryl group directly into the pteridine nucleus by the action of arene diazonium salt in an aqueous alkaline solution is described. 1,3-Dimethyllumazine and benzene diazonium chloride reacts in an aqueous solution at pH 8-9 to give 7 -phenyl-1 ,3-dimethyllumazine together with a little of 6-phenyi-1 ,3-dimethyllumazine. The analogous reactions of 1,3-dimethyllumazine with 4-methyl-, 4-methm.),-, 4-chloro-, and 3-chlorobenzene diazonium chlorides give the corresponding 7-aryl-1,3-dimethyllumazines as major products together with a little of 6-aryl-1,3-dimethyllumazines. Reactions of 1,3-dimethyllumazine 5-oxide with arene diazonium salts under the same conditions exclusively afford the corresponding 6-aryl-1,3-dimethyllumazine 5-oxides which are easily converted to 6-aryl-1,3-dimethyllumazine by the action of tributylphosphine. Mechanisms concerning regioselectivities are investigated by using molecular orbital calculations.


2020 ◽  
Vol 997 ◽  
pp. 49-55
Author(s):  
Md. Faruk Hossen ◽  
Sinin Hamdan ◽  
Md. Rezaur Rahman ◽  
Md. Tipu Sultan

The jute polyethylene composites were developed using the hot-press technique with different fiber weight ratios. Due to the hydrophilic nature of fiber, it exhibited poor interfacial interaction to hydrophobic polymer matrix. In order to enhance the interfacial interaction between fiber and polymer, the benzene diazonium salt (BDS), propionic anhydride (PA), and 3-isocyanatopropyl triethoxysilane (silane) treated jute were used for the manufacturing of composites in this study. The chemical resistance tests of prepared composites were performed in order to probe whether these are resistant to various chemicals such as: acids, alkalis, and solvents. The effect of chemical treatments of the composites have been investigated. It was observed that the fabricated composites were resistant to all chemicals except carbon tetrachloride. The treated jute composites showed higher chemical resistance than raw jute composite and silane treated jute composite yield the highest resistance which can be suggested for making the water and chemical storage tanks.


2019 ◽  
Author(s):  
Nicholas Marshall ◽  
Andres Rodriguez

Development of a method for the surface-initiated Kumada cross-coupling polymerization based on 4-iodophenyldiazonium salt thin films, and use of this method to make very thick polythiophene brushes.<br>


Molecules ◽  
2021 ◽  
Vol 26 (6) ◽  
pp. 1631
Author(s):  
Camila F. Olguín ◽  
Nicolás Agurto ◽  
Carlos P. Silva ◽  
Carolina P. Candia ◽  
Mireya Santander-Nelli ◽  
...  

Current selective modification methods, coupled with functionalization through organic or inorganic molecules, are crucial for designing and constructing custom-made molecular materials that act as electroactive interfaces. A versatile method for derivatizing surfaces is through an aryl diazonium salt reduction reaction (DSRR). A prominent feature of this strategy is that it can be carried out on various materials. Using the DSRR, we modified gold surface electrodes with 4-aminebenzene from 4-nitrobenzenediazonium tetrafluoroborate (NBTF), regulating the deposited mass of the aryl film to achieve covering control on the electrode surface. We got different degrees of covering: monolayer, intermediate, and multilayer. Afterwards, the ArNO2 end groups were electrochemically reduced to ArNH2 and functionalized with Fe(II)-Phthalocyanine to study the catalytic performance for the oxygen reduction reaction (ORR). The thickness of the electrode covering determines its response in front of ORR. Interestingly, the experimental results showed that an intermediate covering film presents a better electrocatalytic response for ORR, driving the reaction by a four-electron pathway.


1959 ◽  
Vol 7 (1) ◽  
pp. 50-65 ◽  
Author(s):  
MARVIN M. NACHLAS ◽  
THEODORE P. GOLDSTEIN ◽  
DAVID H. ROSENBLATT ◽  
MARVIN KIRSCH ◽  
ARNOLD M. SELIGMAN

Reliability of enzymatic localization in tissue sections by the simultaneous coupling techniques is dependent to a great extent upon the speed of coupling. Therefore, the influence on coupling rate of the structure of the diazonium ion and of the coupling component was studied. Electro-negative groups in the diazonium ion increase the rate of coupling, while the same groups in the coupling component decrease the rate. Electro-positive groups in the coupling component accelerate coupling, but slow it when present in the diazonium ion. The relation of coupling rate and electro-negativity of the substituents in the diazonium ion follows Hammett's equation (8). Although the relations is linear on coupling with aromatic hydroxy compounds, it is not so with aromatic amines. The most active diazonium ions showed no increase in coupling rate with aromatic amines. This suggests that for those enzymes hydrolyzing an ester link, increase of coupling rate might be accomplished by modifying the structure of either the coupling component used in the substrate or the diazonium salt. However, for enzymes splitting amide linkages, the only possibility of improving the localization is by modifying the structure of the coupling component.


Carbon ◽  
2016 ◽  
Vol 102 ◽  
pp. 419-425 ◽  
Author(s):  
Liang Cui ◽  
Yuanhong Xu ◽  
Bingping Liu ◽  
Wenrong Yang ◽  
Zhongqian Song ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document