Miniaturized coplanar waveguide-fed disk monopole antenna for ultra-wideband applications with improved wireless local area network band rejection

2012 ◽  
Vol 23 (1) ◽  
pp. 83-89 ◽  
Author(s):  
Sara Sadat Karimabadi ◽  
Amir Reza Attari
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Coplanar Waveguide ◽  
Local Area ◽  
Monopole Antenna ◽  
Ultra Wideband ◽  
Area Network

Super wideband printed monopole antenna for ultra wideband applications

2015 ◽  
Vol 9 (1) ◽  
pp. 133-141 ◽  
Author(s):  
Sandeep Kumar Palaniswamy ◽  
Malathi Kanagasabai ◽  
Shrivastav Arun Kumar ◽  
M. Gulam Nabi Alsath ◽  
Sangeetha Velan ◽  
...  
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Ground Plane ◽  
Wide Band ◽  
Local Area ◽  
Monopole Antenna ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Compact Size

This paper presents the design, testing, and analysis of a clover structured monopole antenna for super wideband applications. The proposed antenna has a wide impedance bandwidth (−10 dB bandwidth) from 1.9 GHz to frequency over 30 GHz. The clover shaped antenna with a compact size of 50 mm × 45 mm is designed and fabricated on an FR4 substrate with a thickness of 1.6 mm. Parametric study has been performed by varying the parameters of the clover to obtain an optimum wide band characteristics. Furthermore, the prototype introduces a method of achieving super wide bandwidth by deploying fusion of elliptical patch geometries (clover shaped) with a semi elliptical ground plane, loaded with a V-cut at the ground. The proposed antenna has a 14 dB bandwidth from 5.9 to 13.1 GHz, which is suitable for ultra wideband (UWB) outdoor propagation. The prototype is experimentally validated for frequencies within and greater than UWB. Transfer function, impulse response, and group delay has been plotted in order to address the time domain characteristics of the proposed antenna with fidelity factor values. The possible applications cover wireless local area network, C-band, Ku-band, K-band operations, Worldwide Interoperability for Microwave Access, and Wireless USB.

scholarly journals A CPW-Fed Rectangular Ring Monopole Antenna for WLAN Applications

2014 ◽  
Vol 2014 ◽  
pp. 1-6 ◽  
Author(s):  
Sangjin Jo ◽  
Hyunjin Choi ◽  
Beomsoo Shin ◽  
Sangyeol Oh ◽  
Jaehoon Lee
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Coplanar Waveguide ◽  
Ground Plane ◽  
Local Area ◽  
Monopole Antenna ◽  
Dual Band ◽  
Area Network ◽  
Feed Line ◽  
Compact Size

We present a simple coplanar waveguide- (CPW-) fed rectangular ring monopole antenna designed for dual-band wireless local area network (WLAN) applications. The antenna is based on a simple structure composed of a CPW feed line and a rectangular ring. Dual-band WLAN operation can be achieved by controlling the distance between the rectangular ring and the ground plane of the CPW feed line, as well as the horizontal vertical lengths of the rectangular ring. Simulated and measured data show that the antenna has a compact size of21.4×59.4 mm2, an impedance bandwidths of 2.21–2.70 GHz and 5.04–6.03 GHz, and a reflection coefficient of less than −10 dB. The antenna also exhibits an almost omnidirectional radiation pattern. This simple compact antenna with favorable frequency characteristics therefore is attractive for applications in dual-band WLAN.

Design of a Quad-Band Monopole Antenna with Independent Frequency Control

2019 ◽  
Vol 28 (06) ◽  
pp. 1950101
Author(s):  
Wang Ren ◽  
Peng-Hong Wang
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Frequency Control ◽  
Coplanar Waveguide ◽  
Ground Plane ◽  
Local Area ◽  
Monopole Antenna ◽  
Ring Resonators ◽  
Area Network ◽  
Global Positioning

A coplanar waveguide (CPW)-fed I-shaped monopole antenna with independent frequency control characteristic is presented for simultaneously satisfying the global positioning system (GPS), wireless local area network (WLAN), and worldwide interoperability for microwave access (WiMAX) applications. It is printed on an FR4 substrate with a single-layered metallic structure and the overall dimensions are [Formula: see text][Formula: see text]mm3. The proposed antenna consists of an I-shaped monopole, a pair of split-ring resonators (SRRs), and a coplanar ground plane. The unique advantage of this study is that the four frequency bands are generated individually by different radiating elements. That is, each of them can be controlled independently with little interference from others, which brings added convenience to the antenna design, optimization and debugging processes. Simulated and measured results both demonstrate that it can cover the 1.575[Formula: see text]GHz GPS (1.57–1.59[Formula: see text]GHz); 2.4/5.2/5.8[Formula: see text]GHz WLAN (2.4–2.485, 5.15–5.35 and 5.725–5.825[Formula: see text]GHz) and 3.5/5.5[Formula: see text]GHz WiMAX (3.40–3.60 and 5.25–5.85[Formula: see text]GHz) applications with satisfactory radiation patterns and acceptable gains.

Transient response of dual-band-notched ultra-wideband antenna

2014 ◽  
Vol 7 (1) ◽  
pp. 61-67 ◽  
Author(s):  
Jagannath Malik ◽  
Parth C. Kalaria ◽  
Machavaram V. Kartikeyan
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Low Cost ◽  
Coplanar Waveguide ◽  
Local Area ◽  
Ultra Wideband ◽  
Dual Band ◽  
Portable Devices ◽  
Area Network ◽  
Network Systems

In the present study, an ultra-wideband (UWB) antenna has been proposed using coplanar waveguide (CPW) feed with dual-band-notch characteristics. Slot-loaded radiator and U-shaped CPW resonator are used for band rejection at 3.5 and 5–6 GHz respectively to reduce interference with existing World interoperability for microwave access and wireless local area network systems. With an extended operating band (measured at 10 dB return loss) the antenna operates successfully over the entire UWB range (3.1–10.6 GHz) with a form factor of 30 × 20 × 1.524 mm3 on a commercially low-cost FR-4 substrate. Experimental measurement results are presented in support of the simulated results for the proposed antenna for practical application. The antenna has been successfully fabricated and measured, showing broadband matched impedance and good omnidirectional radiation pattern throughout the operating bandwidth. Measured time-domain analysis for both the orientations, i.e. face-to-face and side-by-side, yields excellent performance in the open environment scenario. With fairly good and consistent monopole such as omnidirectional radiation patterns in H-plane and linear transmission responses, the proposed antenna is well suited to be integrated within portable devices.

A novel ACPW-fed quad-band hybrid antenna for wireless applications

2018 ◽  
Vol 10 (4) ◽  
pp. 460-468 ◽  
Author(s):  
Wang Ren ◽  
Li-Juan Zhang ◽  
Shu-Wei Hu
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Coplanar Waveguide ◽  
Local Area ◽  
Monopole Antenna ◽  
Area Network ◽  
Wireless Applications ◽  
Left Handed ◽  
Second Mode ◽  
Global Positioning

This paper presents a novel asymmetric coplanar waveguide-fed quad-band hybrid antenna for wireless applications. The proposed hybrid antenna combines a conventional monopole antenna and a zeroth-order resonator antenna to perform a dual-mode operation. The first mode is generated by a slotted monopole antenna, supporting the two higher resonances at about 3.5 and 5.8 GHz. The second mode is supported by loading a composite right-/left-handed transmission line unit cell near the slotted monopole, contributing to the two lower resonances at about 1.6 and 2.5 GHz. It is printed on an FR4 substrate with the overall dimensions of 40 mm × 24 mm × 1.6 mm. Experimental results demonstrate that it can cover the global positioning system (1.57–1.59 GHz), wireless local area network (2.4–2.485, 5.15–5.35, and 5.725–5.825 GHz), and worldwide interoperability for microwave access (2.5–2.69, 3.3–3.7, and 5.25–5.85 GHz) applications with monopole-like radiation patterns and acceptable gains.

scholarly journals A Novel Broadband Monopole Antenna with T-Slot, CB-CPW, Parasitic Stripe and Heart-Shaped Slice for 5G Applications

Sensors ◽  
2020 ◽  
Vol 20 (24) ◽  
pp. 7002
Author(s):  
Zhendong Ding ◽  
Hao Wang ◽  
Shifei Tao ◽  
Dan Zhang ◽  
Chunyu Ma ◽  
...  
Keyword(s):  
Radio Frequency Identification ◽  
High Efficiency ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Coplanar Waveguide ◽  
Local Area ◽  
Monopole Antenna ◽  
Maximum Efficiency ◽  
Area Network ◽  
Frequency Identification

This paper presents a novel broadband monopole antenna that was equipped with a bottom semicircle ground structure, a parasitic patch, a T-shaped slot, s transmission line, a parasitic strip, heart-shaped slices and a coplanar waveguide (CPW). The simulation results revealed that the proposed design had a relatively high return loss, a wide bandwidth and high efficiency. A prototype of the proposed antenna with an overall size of 0.94 λ0 × 0.94 λ0 × 0.02 λ0 (λ0 is the free-space wavelength) was fabricated and measured. The measurement results showed that the prototype had a bandwidth of 4.02 GHz (4.69–8.71 GHz) and a relative bandwidth of 60%. Besides, the maximum gain was 3.31 dBi and the maximum efficiency was 91.1% in the range of 5 to 8.5 GHz. Furthermore, it was found that the prototype almost achieved omnidirectional radiation. Its operating frequency band covered those of industrial scientific medical (ISM) (5.725–5.850 GHz), the radio frequency identification (RFID) (5.8 GHz) and the wireless local area network (WLAN) (5.15–5.25 GHz and 5.725–5.825 GHz).

scholarly journals A Coplanar Waveguide Fed UWB Antenna using Embedded E-shaped Structure with WLAN Band-rejection

Frequenz ◽  
2018 ◽  
Vol 72 (7-8) ◽  
pp. 325-332 ◽  
Author(s):  
Han Xu ◽  
Kai-Da Xu ◽  
Wei Nie ◽  
Yan-Hui Liu
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Coplanar Waveguide ◽  
Local Area ◽  
Ultra Wideband ◽  
Center Frequency ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Uwb Antenna ◽  
System A

Abstract A compact coplanar waveguide (CPW)-fed ultra-wideband (UWB) monopole antenna using embedded E-shaped structure with wireless local area network (WLAN) band-rejection is presented. The introduction of this E-shaped structure working as the radiator can enhance the impedance bandwidth of the UWB antenna without increasing the overall size. For preventing the interference from WLAN system, a pair of L-shaped stubs are connected to the ground of UWB antenna to create the rejected band. The center frequency of this rejected band is about 5.5 GHz with the rejection range of 5.2~5.8 GHz. Good agreement can be observed between the simulated and measured results.

A Compact Antenna Design With High Gain for Wireless Energy Harvesting

2021 ◽  
pp. 244-253
Author(s):  
Priya Sharma ◽  
Ashutosh Kumar Singh
Keyword(s):  
Energy Harvesting ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Coplanar Waveguide ◽  
Local Area ◽  
High Gain ◽  
Center Frequency ◽  
Area Network ◽  
Rf Energy Harvesting ◽  
Rf Energy

A compact rectangular slotted antenna fed through coplanar waveguide for rectenna system is proposed in the application of radio frequency (RF) energy harvesting at center frequency of 2.45 GHz in the wireless local area network (WLAN) band. Three unequal widths of rectangular slots with equal distance have been created step by step to maximize the peak gain to 3.6 dB of the antenna. Radiation plot of the proposed antenna has been depicted to be omnidirectional for RF energy harvesting with maximum radiation efficiency characteristics. The dimension of the antenna is reduced up to 28 × 17 mm2 with better reflection coefficient of -34.6dB.

Sign in / Sign up

Export Citation Format

Share Document