scholarly journals Impact of Polymerization Process Parameters on Improved Comonomer Incorporation Behavior in Ziegler‐Natta Catalysis

2021 ◽  
pp. 2100042
Author(s):  
Lukas Göpperl ◽  
Daniel Pernusch ◽  
Julia Schwarz ◽  
Christian Paulik
2015 ◽  
Vol 744-746 ◽  
pp. 1507-1513 ◽  
Author(s):  
Hai Chao Wang ◽  
Wei Wei Li ◽  
Fang Ning Sun ◽  
Zhi Gang Yang ◽  
Chen Chen ◽  
...  

By analyzing two Polycarboxylate cement admixture of different polymerization process adaptability, the cement paste experiment is carried out to show the influence of Polycarboxylate superplasticizer, slump agent and the cement synthesis process on cement adaptability. Through orthogonal design method, result is drawn from the comparison of the influence of initial liquidity and an hour liquidity under different conditions,which is base on treating Polymeric acid process parameters as effecting factor within a certain range. It is shown that the preferably optimized process parameters of Polycarboxylic acid exist in the same kind of cement.The system error caused by the impact of cement composition is indicated in different kinds of cement.The adaptability of Polycarboxylic acid cement admixture of the mother liquor is available in the process optimization of the parameters.


Author(s):  
Nitin Uppal ◽  
Panos S. Shiakolas

Two photon polymerization (2PP) is a rapid prototyping technique for the fabrication of micro/nano structures from photosensitive polymers. The polymerization process and its resolution depend on the combination of various chemical and physical process parameters. In this research, statistical techniques are employed to evaluate the sensitivity of the 2PP process on the applied laser power, scanning speed, and concentration of photoinitiator. The experiments were performed using the ethoxylated (6) trimethylolpropane triacrylate (SR499-Sartomer) monomer and acyl phosphine oxide (Lucirin TPO-L-BASF) photoinitiator. A design of experiments approach is utilized to evaluate the effect of these process parameters at various set levels on the polymerized width and height. The proposed model is checked for interaction among the process parameters and multiple comparisons are performed to evaluate the statistically significant differences. Also, a detailed discussion of the model verification based on error analysis is performed and presented. A regression model is also developed for the prediction of polymerization resolution and the developed statistical model is experimentally verified. Finally, the developed model and the understanding acquired through the statistical analysis were used for the prototyping of various micro/nano structures.


2012 ◽  
Vol 550-553 ◽  
pp. 643-647
Author(s):  
Xia Li ◽  
Huai Zhi Wu ◽  
Xian Se Li

Polyepoxy succinic acid (PESA) is a well-established green scale inhibitor. As compared with the testing results of the samples from some relevant domestic companies, it is found that the scale inhibition performance exhibits a significant deviation from batch to batch. Over the course of PESA synthesis, the focus was on the investigation of the effect of the main process parameters such as pH in the synthetic system, temperature and time upon the scale inhibition performance of the resultant product. The findings show that the pH in the synthetic system affects significantly the intermediate yield in the epoxidation step, and that there exists a correlation between the operational temperature and time in the polymerization process. When the 20 ppm sample prepared at the optimized polymerization temperature and time of 90 °C and 2 h, respectively, was dosed in a testing system, the scale inhibition performance at 10 h on stream is invariably no less than 95%.


1974 ◽  
Vol 31 (02) ◽  
pp. 309-318
Author(s):  
Phyllis S Roberts ◽  
Raphael M Ottenbrite ◽  
Patricia B Fleming ◽  
James Wigand

Summary1. Choline chloride, 0.1 M (in 0.25 M Tris. HCl buffer, pH 7.4 or 8.0, 37°), doubles the rate of hydrolysis of TAME by bovine thrombokinase but has no effect on the hydrolysis of this ester by either human or bovine thrombin. Only when 1.0 M or more choline chloride is present is the hydrolysis of BAME by thrombokinase or thrombin weakly inhibited. Evidence is presented that shows that these effects are due to the quaternary amine group.2. Tetramethyl ammonium bromide or chloride has about the same effects on the hydrolysis of esters by these enzymes as does choline chloride but tetra-ethyl, -n.propyl and -n.butyl ammonium bromides (0.1 M) are stronger accelerators of the thrombokinase-TAME reaction and they also accelerate, but to a lesser degree, the thrombin-TAME reaction. In addition, they inhibit the hydrolysis of BAME by both enzymes. Their effects on these reactions, however, do not follow any regular order. The tetraethyl compound is the strongest accelerator of the thrombokinase-TAME reaction but the tetra-ethyl and -butyl compounds are the strongest accelerators of the thrombin-TAME reaction. The ethyl and propyl compounds are the best (although weak) inhibitors of the thrombokinase-BAME and the propyl compound of the thrombin-BAME reactions.3. Tetra-methyl, -ethyl, -n.propyl and -n.butyl ammonium bromides (0.01 M) inhibit the clotting of fibrinogen by thrombin (bovine and human proteins) at pH 7.4, imidazole or pH 6.1, phosphate buffers and they also inhibit, but to a lesser degree, a modified one-stage prothrombin test. In all cases the inhibition increases regularly as the size of the alkyl group increases from methyl to butyl. Only the ethyl com pound (0.025 M but not 0.01 M), however, significantly inhibits the polymerization of bovine fibrin monomers. It was concluded that inhibition of the fibrinogen-thrombin and the one-stage tests by the quaternary amines is not due to any effect of the com pounds on the polymerization process but probably due to inhibition of thrombin’s action on fibrinogen by the quaternary amines.


2003 ◽  
Vol 771 ◽  
Author(s):  
Amir Fardad ◽  
Wei Liang ◽  
Yadong Zhang ◽  
Bryson Case ◽  
Shibin Jiang ◽  
...  

AbstractFluorinated and photo-imageable precursors are synthesized through a Barbier-Grignard reaction for 1550-nm window. The precursors are used for the sol-gel process of integrated optic components for silica-on-silicon technology. Material compositions and process parameters are optimized to achieve internal absorptions >0.1 dB/cm and propagation losses of about 0.5 dB/cm at 1550 nm. Compact 1×16 Beam splitters are designed and fabricated which exhibit >0.3 dB power uniformity, >0.1 dB PDL and 1.5 dB coupling loss. By hybrid integration of the passive splitters and in-house fiber amplifiers, amplifying splitters are demonstrated at various signal intensities.


Sign in / Sign up

Export Citation Format

Share Document