Double coated optical fibers undergoing temperature variations: The influence of the mechanical behavior on the added transmission losses

1994 ◽  
Vol 34 (5) ◽  
pp. 414-419 ◽  
Author(s):  
Franco Cocchini
Author(s):  
Shella A. Grant ◽  
Abdelouahed Soufiane ◽  
Gerald Shirk ◽  
Steve W. Martin

2010 ◽  
Vol 2010 ◽  
pp. 1-6 ◽  
Author(s):  
Andreas Seidel ◽  
Jacek Gosciniak ◽  
Maria U. Gonzalez ◽  
Jan Renger ◽  
Carsten Reinhardt ◽  
...  

We present fiber-coupled dielectric-loaded plasmonic waveguides for 1.55 μm telecom wavelength fabricated by two-photon polymerization and nanoimprint lithography. The waveguide structures include 100-μm-long plasmonic waveguides connected on both ends to tapered dielectric waveguides used for end-fire coupling with optical fibers. The excitation of plasmonic waveguides is verified via polarization-resolved measurements of the overall transmission, demonstrating thereby that this technology is suitable in principle for the integration of plasmonic components into fiberoptics. Loss mechanisms are investigated and improvements suggested to reduce transmission losses and consequently increase the viability of practical application.


2017 ◽  
Vol 13 (1) ◽  
pp. 53-58 ◽  
Author(s):  
Hisham Hisham

This paper presents a numerical analysis for the effect of temperature variations on the strain response of polymer optical fiber (POF) Bragg gratings. Results show that the dependence of the Bragg wavelength (λB) upon strain and temperature variations for the POF Bragg gratings is lies within the range of 0.462 – 0.470 fm με-1 °C-1 compare with 0.14 – 0.15 fm με-1 °C-1 for the SOFs Bragg gratings. Also, results show that the strain response for the POF Bragg gratings changed on average by 1.034 ± 0.02fm με- 1°C-1 and on average by 0.36 ± 0.03fm με-1°C-1 for the silica optical fiber (SOF) Bragg gratings. The obtained results are very important for strain sensor applications especially in the environments where the temperature change.


Polymers ◽  
2018 ◽  
Vol 10 (10) ◽  
pp. 1153 ◽  
Author(s):  
Weidong Liu ◽  
Liangchi Zhang

This paper aims to explore the mechanisms of the complex thermo-mechanical behavior of polymer glass across a wide range of temperature variations. To this end, the free vibration frequency spectrum of simply supported poly(methyl methacrylate) (PMMA) beams was thoroughly investigated with the aid of the impulse excitation technique. It was found that the amplitude ratio of the multiple peaks in the frequency spectrum is a strongly dependent on temperature, and that the peaks correspond to the multiple vibrational modes of the molecular network of PMMA. At a low temperature, the vibration is dominated by the overall microstructure of PMMA. With increasing the temperature, however, the contribution of the sub-microstructures is retarded by β relaxation. Above 80 °C, the vibration is fully dominated by the microstructure after relaxation. The relaxation time at the transition temperature is of the same order of the vibration period, confirming the contribution of β relaxation. These findings provide a precise method for establishing reliable physical-based constitutive models of polymer glass.


1996 ◽  
Author(s):  
Anna B. Wojcik ◽  
M. John Matthewson ◽  
Lisa C. Klein ◽  
Paul R. Foy ◽  
Elias Snitzer ◽  
...  

2021 ◽  
Vol 7 (4) ◽  
pp. 63
Author(s):  
Carmelo Militello ◽  
Leonardo Rundo ◽  
Fabrizio Vicari ◽  
Luca Agnello ◽  
Giovanni Borasi ◽  
...  

Structural and metabolic imaging are fundamental for diagnosis, treatment and follow-up in oncology. Beyond the well-established diagnostic imaging applications, ultrasounds are currently emerging in the clinical practice as a noninvasive technology for therapy. Indeed, the sound waves can be used to increase the temperature inside the target solid tumors, leading to apoptosis or necrosis of neoplastic tissues. The Magnetic resonance-guided focused ultrasound surgery (MRgFUS) technology represents a valid application of this ultrasound property, mainly used in oncology and neurology. In this paper; patient safety during MRgFUS treatments was investigated by a series of experiments in a tissue-mimicking phantom and performing ex vivo skin samples, to promptly identify unwanted temperature rises. The acquired MR images, used to evaluate the temperature in the treated areas, were analyzed to compare classical proton resonance frequency (PRF) shift techniques and referenceless thermometry methods to accurately assess the temperature variations. We exploited radial basis function (RBF) neural networks for referenceless thermometry and compared the results against interferometric optical fiber measurements. The experimental measurements were obtained using a set of interferometric optical fibers aimed at quantifying temperature variations directly in the sonication areas. The temperature increases during the treatment were not accurately detected by MRI-based referenceless thermometry methods, and more sensitive measurement systems, such as optical fibers, would be required. In-depth studies about these aspects are needed to monitor temperature and improve safety during MRgFUS treatments.


Sign in / Sign up

Export Citation Format

Share Document