Bioinspired super-hydrophobic fractal array via a facile electrochemical route: preparation and corrosion inhibition for Cu

Super-hydrophobic surfaces (SHS) usually are formed from a combination of low surface energy materials and micro/nanostructures via two-step approaches, and they have promising applications in material corrosion protection.

Face-On Oriented Hydrophobic Conjugated Polymers as Dopant-Free Hole-Transport Materials for Efficient and Stable Perovskite Solar Cells with Fill Factor Approaching 85%

Developing high-performance dopant-free hole transport material (DF-HTM) is critical to realizing stable perovskite solar cells (PSCs). Herein, a class of siloxane-terminated polymers (PBZ-Si) with low surface energy were studied as...

Excellent hydrophilicity of polyurethane modified polyvinylidene fluoride

Polyvinylidene fluoride (PVDF) is a promising membrane material in ultrafiltration (UF) applications; its extensive application however is limited due to the disadvantage in hydrophilicity and low surface energy. Herein, a sort of TPU-modified PVDF membrane is prepared by blending method and its hydrophilicity is compared with a series of pure/modified PVDF membranes. The contact angle and pure water flux (PWF) results demonstrate that the hydrophilicity of the TPU-modified PVDF membrane is enhanced, and the performance is not inferior to that of traditional pore-modified PVDF membranes. SEM image shows that the TPU-modified PVDF membrane maintains morphology of the pure PVDF membrane, indicating that TPU molecules have excellent compatibility with PVDF molecules and can maintain the mechanical property of PVDF membrane to a certain extent. Finally, we explore the effects of TPU molecules and PVDF molecules on water molecules, respectively, from a microscopic perspective involving first principles. This investigation not only establishes that PVDF membrane has been prepared with enhanced hydrophilicity, but also provides a novel avenue for the modification of membrane properties.

Effects of plasma treatments of polypropylene adhesive joints used in the automotive industry

Plasma treatment has been used in recent years to activate the surfaces of adhesive substrates and thus as an adhesion promoter between adhesive and substrates. The use of plasma treatments is widely adopted in the automotive industries especially for polymers that present low surface energy, such as polypropylene. In this work, polypropylene substrates used in the automotive industries have been treated with two different techniques: vacuum and atmospheric plasma. Then, polyurethane and methacrylate adhesives have been used to bond single lap joints (SLJs). Typically, these two adhesives cannot bond polypropylene substrates without surface treatments. An experimental plan has been designed to investigate the process parameters that can increase the functional polar groups (FPGs) maximizing the adhesion strength. Besides the types of plasma, two different gas carriers (air and nitrogen) and different treatment times have been investigated. The substrates, treated and not treated, have been assessed through scanning electron microscopy, energy-dispersive X-ray analysis, and Fourier-transform infrared spectroscopy to quantitatively assess the increment of FPGs after the different treatments. The experimental plan shows that the atmospheric plasma can improve the surface of the substrates by using a smaller time. Mechanical tests on SLJs show that methacrylate and polyurethane cannot bond polypropylene substrates without the plasma treatment. On the other hand, the treated substrates can form a strong bonding with the adhesive since all SLJs exhibit a substrate failure. Mechanical tests have been also carried out after three different aging cycles showing that the adopted plasma treatment is not affected by the aging cycles.

Towards AquaSun practical utilization: strong adhesion and lack of ecotoxicity of solar-driven antifouling sol-gel coating

The outcomes of adhesion and ecotoxicity tests carried out on metal specimens faithfully representing the surface of real ships, including the primer and tie coat layers typically applied on ship hull prior to deposition of the antifouling paint, show the practical applicability of "AquaSun" antifouling sol-gel coatings. Newly developed AquaSun coatings share superhydrophicity (contact angle >115) and exceptionally high scratch resistance (ASTM 5B). Coupled to the ecofriendly antifouling mechanism based on continuous H2O2 formation upon exposure to solar light and foul release due to low surface energy, these results open the route to the practical utilization of these novel marine coatings.

Towards AquaSun practical utilization: strong adhesion and lack of ecotoxicity of solar-driven antifouling sol-gel coating

The outcomes of adhesion and ecotoxicity tests carried out on metal specimens faithfully representing the surface of real ships, including the primer and tie coat layers typically applied on ship hull prior to deposition of the antifouling paint, show the practical applicability of "AquaSun" antifouling sol-gel coatings. Newly developed AquaSun coatings share superhydrophicity (contact angle >115) and exceptionally high scratch resistance (ASTM 5B). Coupled to the ecofriendly antifouling mechanism based on continuous H2O2 formation upon exposure to solar light and foul release due to low surface energy, these results open the route to the practical utilization of these novel marine coatings.

Decarbonization and Improved Energy Efficiency Using a Novel Nanocomposite Surface Treatment

Fouling of heat exchanger equipment through the formation and attachment of hard scale, microbially induced corrosion (MIC) products, or particulate erosion is a serious challenge to reliable production in the oil and gas industry. Exchangers which become fouled in this way perform 15-30% worse than their rated ability, requiring either constant intervention to clean away biofilms, continuous injection of biocides and corrosion inhibitors, or the regular plugging of tubes to prevent leaks, representing a significant operating expense and billions of dollars in lost production time. When an exchanger is unable to provide sufficient heat due to tube fouling, additional sources of heating must be utilized to make up for this deficit and to ensure that facility processes remain within design allowances. This need for supplemental heating is a significant source of carbon emissions in the industry and represents a significant obstacle towards decarbonization efforts. However, it also represents an economically attractive way to simultaneously lower emissions while also lowering a producer's cost per barrel. This work describes an alternate strategy to control and prevent fouling in heat exchangers, through the one-time application of an omniphobic (water- and oil-repelling) nano-surface treatment. Once applied to a heat exchanger, the extremely smooth and low-surface energy material greatly reduces the ability of MIC-causing bacteria to deposit and adhere to the surface. Because it imparts functionality to the surface itself, rather than simply function as a physical barrier, it enables long lasting protection which was validated under laboratory conditions in a pressurized autoclave, as well as two pilot demonstrations. Results from both the laboratory and field evaluations of the treatment's promise showed that treated surfaces showed a corrosion rate over 36-times lower when compared to untreated surfaces, while also completely arresting the formation of corrosion pitting, tube fouling, and erosion of the tube interior. These field-validated results were then applied to the observed heating deficit of a proposed deployment site, resulting in calculated carbon emissions savings of up to 17,000 Tons CO2 per year.

Matching the Cellulose/Silica Films Surface Properties for Design of Biomaterials That Modulate Extracellular Matrix

The surface properties of composite films are important to know for many applications from the industrial domain to the medical domain. The physical and chemical characteristics of film/membrane surfaces are totally different from those of the bulk due to the surface segregation of the low surface energy components. Thus, the surfaces of cellulose acetate/silica composite films are analyzed in order to obtain information on the morphology, topography and wettability through atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS) and contact angle investigations. The studied composite films present different surface properties depending on the tetraethyl orthosilicate (TEOS) content from the casting solutions. Up to a content of 1.5 wt.% TEOS, the surface roughness and hydrophobicity increase, after which there is a decrease in these parameters. This behavior suggests that up to a critical amount of TEOS, the results are influenced by the morphology and topographical features, after which a major role seems to be played by surface chemistry—increasing the oxygenation surfaces. The morphological and chemical details and also the hydrophobicity/hydrophilicity characteristics are discussed in the attempt to design biological surfaces with optimal wettability properties and possibility of application in tissue engineering.