Configurational isomerization of push-pull thiazolidinone derivatives controlled by intermolecular and intramolecular RAHB: 1 H NMR dynamic investigation of concentration and temperature effects

2004 ◽  
Vol 17 (2) ◽  
pp. 118-123 ◽  
Author(s):  
Rade Marković ◽  
Ata Shirazi ◽  
Zdravko Džambaski ◽  
Marija Baranac ◽  
Dragica Minić

Author(s):  
L. S. Lin ◽  
K. P. Gumz ◽  
A. V. Karg ◽  
C. C. Law

Carbon and temperature effects on carbide formation in the carburized zone of M50NiL are of great importance because they can be used to control surface properties of bearings. A series of homogeneous alloys (with M50NiL as base composition) containing various levels of carbon in the range of 0.15% to 1.5% (in wt.%) and heat treated at temperatures between 650°C to 1100°C were selected for characterizations. Eleven samples were chosen for carbide characterization and chemical analysis and their identifications are listed in Table 1.Five different carbides consisting of M6C, M2C, M7C3 and M23C6 were found in all eleven samples examined as shown in Table 1. M6C carbides (with least carbon) were found to be the major carbide in low carbon alloys (<0.3% C) and their amounts decreased as the carbon content increased. In sample C (0.3% C), most particles (95%) encountered were M6C carbide with a particle sizes range between 0.05 to 0.25 um. The M6C carbide are enriched in both Mo and Fe and have a fee structure with lattice parameter a=1.105 nm (Figure 1).



Praxis ◽  
2009 ◽  
Vol 98 (3) ◽  
pp. 143-149 ◽  
Author(s):  
Knechtle ◽  
Wirth ◽  
Knechtle ◽  
Kohler
Keyword(s):  

Ein 81-jähriger Läufer mit Status nach aortokoronarem Bypass bei bekannter koronarer Herzkrankheit hat einen 100-km-Lauf in 19 h und 45 min erfolgreich beendet. Vor und unmittelbar nach dem Lauf wurden Fett- und Muskelmasse nicht-invasiv sowohl mit der bioelektrischen Impedanzanalyse als auch mit der klassischen Hautfaltenmethode bestimmt. Zusätzlich wurden Blut- und Urinproben zur Beurteilung des Flüssigkeitshaushaltes genommen und eine ¹H-NMR-Spektroskopie des Urins zum Nachweis eines erhöhten Kohlenhydrat-, Fett- oder Eiweissstoffwechsels durchgeführt. Das Körpergewicht nahm um 1.9 kg ab. Während die errechnete Muskelmasse um 0.1 kg zunahm, nahm die errechnete Fettmasse um 0.2 kg (anthropometrische Methode) resp. 3.1 kg (BIA) ab. Das errechnete Körperwasser nahm um 1.2 l zu. Während Hämatokrit, Harnstoff und spezifisches Gewicht des Urins zunahmen, sank das Natrium im Blut ab. Das Plasmavolumen nahm um 19% ab. Die ¹H-NMR-Spektroskopie des Urins zeigte nach der Belastung einen Anstieg der Ketonkörper. Um einen Abbau der Muskelmasse objektivieren zu können, muss der Ausgangswert des Körperwassers abgewartet werden, um keine Fehlinterpretation aufgrund der Methoden zu machen. Unklar bleibt, wieso es zu einer Einlagerung von Wasser kam. In weiteren Untersuchungen könnten zusätzliche Methoden wie DEXA, Muskelbiopsien und Bestimmung von weiteren Blut- und Urinparametern Auskunft geben, ob effektiv und wie viel Muskelmasse abgebaut wird und ob Abbauprodukte der Muskulatur die Nierenfunktion einschränken und somit zu einer Wasserretention führen.



1993 ◽  
Vol 140 (4) ◽  
pp. 305 ◽  
Author(s):  
J. Rodriguez-Tellez ◽  
B. Stothard


2001 ◽  
Vol 45 ◽  
pp. 6-10 ◽  
Author(s):  
M. D. Hartley ◽  
J. F. Spears ◽  
W. D. Smith ◽  
L. R. Fisher ◽  
J. R. Schultheis


2002 ◽  
Vol 715 ◽  
Author(s):  
T. Su ◽  
Robin Plachy ◽  
P. C. Taylor ◽  
S. Stone ◽  
G. Ganguly ◽  
...  

AbstractWe study the H NMR line shapes of a sample of a-Si:H under several conditions: 1) as grown, 2) light-soaked for 600 hours, and 3) light-soaked followed by annealing at different temperatures. At T = 7 K, the NMR line shape of the sample after light soaking exhibits an additional doublet compared to that of the sample as-grown. This doublet is an indication of a closely separated hydrogen pair. The distance between the two hydrogen atoms is estimated to be about (2.3 ± 0.2) Å. The concentration of these hydrogen sites is estimated to be between 1017 and 1018 cm-3 consistent with ESR measurements of the defect density after light soaking. This doublet disappears after the sample is annealed at 200°C for 4 hours.



Sign in / Sign up

Export Citation Format

Share Document