NON-LINEAR DYNAMIC ANALYSIS OF THE TWO-DIMENSIONAL SIMPLIFIED MODEL OF AN ELASTIC CABLE

2002 ◽  
Vol 255 (1) ◽  
pp. 43-59 ◽  
Author(s):  
Y.Y. ZHAO ◽  
L.H. WANG ◽  
D.L. CHEN ◽  
L.Z. JIANG
Keyword(s):  
Dynamic Analysis ◽  
Simplified Model ◽  
Two Dimensional ◽  
Linear Dynamic ◽  
Non Linear

scholarly journals Seismic Strengthening Effects of Full-Size Reinforced Concrete Frame Retrofitted with Novel Concrete-Filled Tube Modular Frame by Pseudo-Dynamic Testing

2021 ◽  
Vol 11 (11) ◽  
pp. 4898
Author(s):  
Jin-Seon Kim ◽  
Ju-Seong Jung ◽  
Dong-Keun Jung ◽  
Eui-Yong Kim ◽  
Kang-Seok Lee
Keyword(s):  
Dynamic Analysis ◽  
Shear Failure ◽  
Dynamic Testing ◽  
Seismic Intensity ◽  
Seismic Retrofitting ◽  
Restoring Force ◽  
Rc Structures ◽  
Linear Dynamic ◽  
Non Linear ◽  
Force Characteristics

The present study proposes a new seismic retrofitting method using a concrete-filled tube modular frame (CFT-MF) system, a novel technique to overcome and improve the limitations of existing seismic strengthening methods. This CFT-MF seismic retrofitting method makes the most of the advantages of both concrete and steel pipes, thereby significantly improving constructability and increasing integration between the existing structure and the reinforcement joints. This method falls into the category of typical seismic retrofitting methods that focus on increasing strength, in which the required amount of seismic reinforcement can be easily estimated. Therefore, the method provides an easy solution to improving the strength of existing reinforced concrete (RC) structures with non-seismic details that are prone to shear failure. In the present study, a full-size two-story test frame modeled from existing domestic RC structures with non-seismic details was subjected to pseudo-dynamic testing. As a result, the effect of the CFT-MF system, when applied to existing RC structures, was examined and verified, especially as to its seismic retrofitting performance, i.e., restoring force characteristics, stiffness reinforcement, and seismic response control. In addition, based on the pseudo-dynamic testing results, a restoring force characteristics model was proposed to implement non-linear dynamic analysis of a structure retrofitted with the CFT-MF system (i.e., the test frame). Finally, based on the proposed restoring force characteristics, non-linear dynamic analysis was conducted, and the results were compared with those obtained by the pseudo-dynamic tests. The results showed that the RC frame (building) with no retrofitting measures applied underwent shear failure at a seismic intensity of 200 cm/s2, the threshold applied in seismic design in Korea. In contrast, in the frame (building) retrofitted with the CFT-MF system, only minor earthquake damage was observed, and even when the maximum seismic intensity (300 cm/s2) that may occur in Korean was applied, small-scale damage was observed. These results confirmed the validity of the seismic retrofitting method based on the CFT-MF system developed in the present study. The non-linear dynamic analysis and the pseudo-dynamic test showed similar results, with an average deviation of 10% or less in seismic response load and displacement.

Non-linear dynamic analysis of time varying length flexible body

2020 ◽  
Vol 2020 (0) ◽  
pp. 513
Author(s):  
Masato TAKEUCHI ◽  
Kensuke HARA ◽  
Hiroshi YAMAURA
Keyword(s):  
Dynamic Analysis ◽  
Flexible Body ◽  
Time Varying ◽  
Linear Dynamic ◽  
Non Linear ◽  
Varying Length

scholarly journals NON-LINEAR DYNAMIC ANALYSIS OF COUPLED SPAR PLATFORM

2013 ◽  
Vol 19 (4) ◽  
pp. 476-491 ◽  
Author(s):  
Mohammed Jameel ◽  
Suhail Ahmad ◽  
A. B. M. Saiful Islam ◽  
Mohd Zamin Zummat
Keyword(s):  
Dynamic Analysis ◽  
Wave Frequency ◽  
Mooring Line ◽  
Wave Loading ◽  
Structural Behaviour ◽  
Offshore Structure ◽  
Spar Platform ◽  
Linear Dynamic ◽  
Long Duration ◽  
Non Linear

Spar platforms are treated as cost-effective and resourceful type of offshore structure in deep water. With increasing depth there are significant changes in its structural behaviour due to coupling of spar hull-mooring line along with radical influence of mooring line damping. So these phenomena should be precisely counted for accurate motion analysis of spar mooring system. In present study, spar platform are configured as a single fully coupled integrated model in ABAQUS/AQUA. Non-linear dynamic analysis in time domain is performed adopting Newmark-β automatic time incrementation technique. Non-linearities due to geometric, loading and boundary conditions are duly considered. Displacement and rotational responses of spar and mooring tensions are obtained during long-duration storm. spar responses get significantly modified and mean position of oscillations gets shifted after longer wave loading. The surge, heave and pitch responses are predominantly excited respectively. The energy contents of PSDs of these responses reduce considerably after long wave loading. Mooring tension responses are significantly different reflecting the damping effect of mooring lines. The pitch response is fairly sensitive to the wave loading duration. After long duration of storm the wave frequency response increases. However, low frequency and wave frequency responses may simultaneously occur due to synchronising sea states.

Non-linear dynamic analysis of hemodynamic behaviour during virtual reality immersion

2002 ◽  
Vol 56 ◽  
pp. 367-369 ◽  
Author(s):  
T. Yambe ◽  
M. Yoshizawa ◽  
A. Tanaka ◽  
K. Abe ◽  
K. Tabayashi ◽  
...  
Keyword(s):  
Virtual Reality ◽  
Dynamic Analysis ◽  
Linear Dynamic ◽  
Non Linear

Non-linear dynamic analysis of orthotropic elliptical plates

1984 ◽  
Vol 20 (2) ◽  
pp. 135-142 ◽  
Author(s):  
M. Sathyamoorthy
Keyword(s):  
Dynamic Analysis ◽  
Linear Dynamic ◽  
Non Linear
Sign in / Sign up

Export Citation Format

Share Document