Virtual Displacement and Virtual Work

2005 ◽  
pp. 65-82
Author(s):  
Mark D. Ardema
1965 ◽  
Vol 32 (4) ◽  
pp. 903-910 ◽  
Author(s):  
J. Denavit ◽  
R. S. Hartenberg ◽  
R. Razi ◽  
J. J. Uicker

The algebraic method using 4 × 4 matrices is extended to the analysis of velocities, accelerations, and static forces in one-degree-of-freedom, single-loop, spatial linkages consisting of revolute and prismatic pairs, either singly or in combination. The methods are well suited for machine calculations and have been tested on a number of examples, one of which is presented. Velocities and accelerations are obtained by differentiation of the matrix-loop or position equation. Static forces are found by combining the method of virtual work with the matrix-loop equation to relate the virtual displacement of the load to given virtual deformations of the links.


2012 ◽  
Vol 91 (105) ◽  
pp. 49-58
Author(s):  
Djordje Djukic

The major issues in the analysis of the motion of a constrained dynamic system are to determine this motion and calculate constraint forces. In the analytical mechanics, only the first of the two problems is analyzed. Here, the problem is solved simultaneously using: 1) Principle of liberation of constraints; 2) Principle of generalized virtual displacement; 3) Idea of ideal constraints; 4) Concept of generalized and ?supplementary" generalized coordinates. The Lagrange-D?Alembert principle of virtual work is generalized introducing virtual displacement as vectorial sum of the classical virtual displacement and virtual displacement in the ?supplementary" directions. From such principle of virtual work we derived Lagrange equations of the second kind and equations of dynamical equilibrium in the ?supplementary" directions. Constrained forces are calculated from the equations of dynamic equilibrium. At the same time, this principle can be used for consideration of equilibrium of system of material particles. This principle simultaneously gives the connection between applied forces at equilibrium state and the constrained forces. Finally, the principle is applied to a few particular problems.


1990 ◽  
Vol 57 (4) ◽  
pp. 964-968 ◽  
Author(s):  
M. Gre´diac ◽  
A. Vautrin

The paper presents a new method to determine the six elastic bending rigidities of thin anisotropic plates. The experimental procedure only requires one plate specimen submitted to several bending tests performed on the same testing device. The data processing is based on the principle of virtual work and it is shown that simple linear relationships between the bending rigidities, applied loads, and plate curvature can be derived using particular virtual displacement fields. The unknown plate rigidities are the solution of a set of linear equations. The numerical simulations of various relevant bending configurations of anisotropic laminated plates point out the efficiency of this new approach.


Author(s):  
Raffaele Pisano

Generally speaking, virtual displacement or work concerns to a timely idea according to which a motion of a certain body is not the unique possible motion. The process of reducing this motion to a particular magnitude and concept, eventually minimizing as a hypothesis, can be traced back to the Aristotelian school. In the history and philosophy of science one finds various enunciations of the Principle of Virtual Laws and its virtual displacement or work applications, i.e., from Aristotle to Leibniz’s vis viva, from Maupertuis’ least action to Euler and Lagrange with calculus of variations (statics and dynamics) to Lazare Carnot’s mechanics. In this case study, I will demonstrate that a particular approach used by Lazare Carnot is original by explaining within the historical context of rival approaches such as the development of the Principle of virtual Laws (also known as the Principle of virtual velocity or of virtual work). I will also discuss Carnot’s geometric motion as one of the possible but invertible movements applied to virtual displacement as employed in his theories of machines and collisions. I will then go on to explore how the originality of an invertible motion within his mechanical and, in general, mathematical research program permitted Carnot to introduce a new way of structuring a scientific theory and making mechanics, with respect to the Newtonian paradigm, to scholars and his students of the École polytechnique de Paris.


1989 ◽  
Vol 111 (1) ◽  
pp. 34-39 ◽  
Author(s):  
A. Hara ◽  
K. Sugimoto

A synthesis method has been developed for the parallel micromanipulator used in a precise positioning. Elastic deformation at notches are used as joint displacements. Since the joint displacements are very small and the micromanipulator makes only a minute motion, the input/output relation can be put in the form of a Jacobian. Each row of the Jacobian designates six elements of a force and moment. By locating the passive joints in a connecting chain so that the virtual work done by the force/moment and the virtual displacement of the passive joints becomes zero, the mechanism that has the given Jacobian is determined. Planar and spatial mechanisms whose Jacobians are diagonal matrices are shown as examples of the synthesis.


2006 ◽  
Vol 128 (6) ◽  
pp. 1349-1351 ◽  
Author(s):  
Yi Lu ◽  
Bo Hu

A novel 2(3-SPR) serial-parallel manipulator is proposed. A novel approach for solving driving forces of the 2(3-SPR) parallel manipulator is proposed by using the virtual work theory and the computer aided design variation geometry. The solving procedure of this method is divided into following steps: First, constitute an initial simulation mechanism by using link dimension chains and driving dimensions of driving limbs; and then constitute a workloads simulation mechanism by using central force and central torque on initial simulation mechanism; finally constitute the force/torque simulation mechanism by giving a virtual displacement to one of the driving limbs, so that the virtual displacement about force and torque can be drawn, the driven force of this driven limb can be calculated by using the virtual work theory. In the same way, the others driven forces can be gotten.


Sign in / Sign up

Export Citation Format

Share Document