1997 ◽  
Vol 34 (30) ◽  
pp. 3953-3976 ◽  
Author(s):  
A.H. Barbat ◽  
S. Oller ◽  
E. Oñate ◽  
A. Hanganu

Author(s):  
Yichi Zhang ◽  
Bingen Yang

Abstract Vibration analysis of complex structures at medium frequencies plays an important role in automotive engineering. Flexible beam structures modeled by the classical Euler-Bernoulli beam theory have been widely used in many engineering problems. A kinematic hypothesis in the Euler-Bernoulli beam theory is that plane sections of a beam normal to its neutral axis remain normal when the beam experiences bending deformation, which neglects the shear deformation of the beam. However, as observed by researchers, the shear deformation of a beam component becomes noticeable in high-frequency vibrations. In this sense, the Timoshenko beam theory, which describes both bending deformation and shear deformation, may be more suitable for medium-frequency vibration analysis of beam structures. This paper presents an analytical method for medium-frequency vibration analysis of beam structures, with components modeled by the Timoshenko beam theory. The proposed method is developed based on the augmented Distributed Transfer Function Method (DTFM), which has been shown to be useful in various vibration problems. The proposed method models a Timoshenko beam structure by a spatial state-space formulation in the s-domain, without any discretization. With the state-space formulation, the frequency response of a beam structure, in any frequency region (from low to very high frequencies), can be obtained in an exact and analytical form. One advantage of the proposed method is that the local information of a beam structure, such as displacements, bending moment and shear force at any location, can be directly obtained from the space-state formulation, which otherwise would be very difficult with energy-based methods. The medium-frequency analysis by the augmented DTFM is validated with the FEA in numerical examples, where the efficiency and accuracy of the proposed method is present. Also, the effects of shear deformation on the dynamic behaviors of a beam structure at medium frequencies are illustrated through comparison of the Timoshenko beam theory and the Euler-Bernoulli beam theory.


2020 ◽  
Vol 20 (13) ◽  
pp. 2041009
Author(s):  
Yichi Zhang ◽  
Bingen Yang

Medium-frequency (mid-frequency) vibration analysis of complex structures plays an important role in automotive, aerospace, mechanical, and civil engineering. Flexible beam structures modeled by the classical Euler–Bernoulli beam theory have been widely used in various engineering problems. A kinematic hypothesis made in the Euler–Bernoulli beam theory is that the plane sections of a beam normal to its neutral axis remain planes after the beam experiences bending deformation, which neglects shear deformation. However, previous investigations found out that the shear deformation of a beam (even with a large slenderness ratio) becomes noticeable in high-frequency vibrations. The Timoshenko beam theory, which describes both bending deformation and shear deformation, would naturally be more suitable for medium-frequency vibration analysis. Nevertheless, vibrations of Timoshenko beam structures in a medium frequency region have not been well studied in the literature. This paper presents a new method for mid-frequency vibration analysis of two-dimensional Timoshenko beam structures. The proposed method, which is called the augmented Distributed Transfer Function Method (DTFM), models a Timoshenko beam structure by a spatial state-space formulation in the [Formula: see text]-domain. The augmented DTFM determines the frequency response of a beam structure in an exact and analytical form, in any frequency region covering low, middle, or high frequencies. Meanwhile, the proposed method provides the local information of a beam structure, such as displacement, shear deformation, bending moment and shear force at any location, which otherwise would be very difficult with energy-based methods. The medium-frequency analysis by the augmented DTFM is validated in numerical examples, where the efficiency and accuracy of the proposed method is demonstrated. Also, the effects of shear deformation on the dynamic behaviors of a beam structure at medium frequencies are examined through comparison of the Timoshenko beam and Euler–Bernoulli beam theories.


2006 ◽  
Vol 13 (3) ◽  
pp. 167-196 ◽  
Author(s):  
Young-Ho Park ◽  
Suk-Yoon Hong

This paper presents the methodology for the energy flow analysis of coupled Timoshenko beam structures and various numerical applications to verify the developed methodology. To extend the application of the energy flow model for corrected flexural waves in the Timoshenko beam, which is developed in the other companion paper, to coupled structures, the wave transmission analyses of general coupled Timoshenko beam systems are performed. First, power transmission and reflection coefficients for all kinds of propagating waves in the general, coupled Timoshenko beam structures are derived by the wave transmission approach. In numerical applications, the energy flow solutions using the derived coefficients agree well with the classical solutions for various exciting frequencies, damping loss factors, and coupled Timoshenko beam structures. Additionally, the numerical results for the Timoshenko beam are compared with those for the Euler-Bernoulli beam.


Sign in / Sign up

Export Citation Format

Share Document