scholarly journals Representing shape by line patterns

1996 ◽  
pp. 230-239 ◽  
Author(s):  
Gabriella Sanniti Baja
Keyword(s):  
Line Patterns

The usefulness of high index low symmetry zone axes for holz line analysis

1987 ◽  
Vol 45 ◽  
pp. 384-385
Author(s):  
C. M. Sung ◽  
D. B. Williams
Keyword(s):  
Lattice Parameter ◽  
High Order ◽  
Zone Axis ◽  
High Index ◽  
High Symmetry ◽  
Second Phases ◽  
Line Patterns ◽  
Low Symmetry ◽  
Line Analysis

Researchers have tended to use high symmetry zone axes (e.g. <111> <114>) for High Order Laue Zone (HOLZ) line analysis since Jones et al reported the origin of HOLZ lines and described some of their applications. But it is not always easy to find HOLZ lines from a specific high symmetry zone axis during microscope operation, especially from second phases on a scale of tens of nanometers. Therefore it would be very convenient if we can use HOLZ lines from low symmetry zone axes and simulate these patterns in order to measure lattice parameter changes through HOLZ line shifts. HOLZ patterns of high index low symmetry zone axes are shown in Fig. 1, which were obtained from pure Al at -186°C using a double tilt cooling holder. Their corresponding simulated HOLZ line patterns are shown along with ten other low symmetry orientations in Fig. 2. The simulations were based upon kinematical diffraction conditions.

Imaging nanostructures on ablated kapton polymide

1993 ◽  
Vol 51 ◽  
pp. 872-873
Author(s):  
Daniel L. Callahan ◽  
H. M. Phillips ◽  
R. Sauerbrey
Keyword(s):  
Electron Microscopy ◽  
Polymer Surface ◽  
Grating Period ◽  
Laser Wavelength ◽  
Integrated Devices ◽  
Transmission Electron ◽  
Excimer Laser Irradiation ◽  
Produce Line ◽  
Line Patterns ◽  
Anisotropic Conduction

Excimer laser irradiation has been used to interferometrically ablate submicron line patterns on to Kapton polyimide. Such patterned material may exhibit highly anisotropic conduction as was predicted from previous studies showing enhanced conductivity from uniformly ablated material. We are currently exploiting this phenomenon to create integrated devices using conventional polymers as both dielectrics and conductors. Extensive scanning electron microscopy (SEM) and limited transmission electron microscopy (TEM) have been conducted in order to characterize the morphology of such patterned nanostructures as a function of processing conditions.The ablation technique employed produces an interference pattern on the polymer surface of period equal to half that of a diffraction grating period, independent of the laser wavelength. In these experiments, a 328 nm grating has been used to produce line patterns of 164 nm line-spacings as shown in Figures 1 and 2. A 200 Å Au coating has been used to both prevent charging and, perhaps more importantly, enhance contrast.

scholarly journals A Multi Camera and Multi Laser Calibration Method for 3D Reconstruction of Revolution Parts

Sensors ◽  
2021 ◽  
Vol 21 (3) ◽  
pp. 765
Author(s):  
Hugo Álvarez ◽  
Marcos Alonso ◽  
Jairo R. Sánchez ◽  
Alberto Izaguirre
Keyword(s):  
3D Reconstruction ◽  
Calibration Method ◽  
Laser Plane ◽  
Calibration Methods ◽  
Laser Calibration ◽  
Calibration Object ◽  
Focus Plane ◽  
Chessboard Pattern ◽  
Line Patterns

This paper describes a method for calibrating multi camera and multi laser 3D triangulation systems, particularly for those using Scheimpflug adapters. Under this configuration, the focus plane of the camera is located at the laser plane, making it difficult to use traditional calibration methods, such as chessboard pattern-based strategies. Our method uses a conical calibration object whose intersections with the laser planes generate stepped line patterns that can be used to calculate the camera-laser homographies. The calibration object has been designed to calibrate scanners for revolving surfaces, but it can be easily extended to linear setups. The experiments carried out show that the proposed system has a precision of 0.1 mm.

To visual orientation of dot and line patterns

1989 ◽  
Vol 7 (2-4) ◽  
pp. 290-291
Author(s):  
P. Lánský ◽  
T. Radil ◽  
N. Yakimoff
Keyword(s):  
Visual Orientation ◽  
Line Patterns

Fabricating 100-nm line patterns with high-transmittance ArF attenuated phase-shift masks

2001 ◽  
Author(s):  
Haruo Iwasaki ◽  
Shinji Ishida ◽  
K. Tonai ◽  
Hiroshi Nozue
Keyword(s):  
Phase Shift ◽  
Line Patterns

scholarly journals First Report of Cucumber mosaic virus in Desert Rose in Taiwan

Plant Disease ◽  
2012 ◽  
Vol 96 (4) ◽  
pp. 593-593 ◽  
Author(s):  
Y. K. Chen ◽  
Y. S. Chang ◽  
Y. W. Lin ◽  
M. Y. Wu
Keyword(s):  
Cucumber Mosaic Virus ◽  
Mosaic Virus ◽  
Chenopodium Quinoa ◽  
Rabbit Antiserum ◽  
Serological Tests ◽  
Reading Frame ◽  
First Report ◽  
Reverse Transcription Pcr ◽  
Wilt Virus ◽  
Line Patterns

Desert rose (Adenium obesum (Forssk.) Roem. & Schult, family Apocynaceae) is native to southeastern Africa, and is a perennial potted ornamental with colorful flowers that are popular in Taiwan. Symptoms of mosaic and chlorotic ringspots and line patterns on leaves were observed in July 2010, on all eight plants in a private garden in Potzu, Chiayi, Taiwan. Spherical virus particles with a diameter of approximately 28 nm were observed in crude sap prepared from symptomatic leaves. Virus culture was established by successive local lesion isolation in Chenopodium quinoa and was maintained in the systemic host Nicotiana tabacum van Hicks. The virus was mechanically transmissible to indicator plants and induced symptoms similar to those incited by Cucumber mosaic virus (CMV). Observed symptoms included local lesions on inoculated leaves of C. amaranticolor and systemic mosaic in Cucumis sativus, Lycopersicon esculentum, N. benthamiana, N. glutinosa, and N. rustica. On N. tabacum, necrotic ringspots developed on inoculated leaves followed by systemic mosaic. Serological tests using ELISA assays and western blotting indicated that the virus reacted positively to a rabbit antiserum prepared to CMV (4). Amplicons of an expected size (1.1 kb) were obtained in reverse transcription-PCR with primers specific to the 3′-half of CMV RNA 3 (3) using total RNA extracted from infected desert rose and N. tabacum. The amplified cDNA fragment was cloned and sequenced (GenBank Accession No. AB667971). Nucleotide sequences of the coat protein open reading frame (CP ORF) (657 nt) had 92 to 96% and 76 to 77% sequence identity to those of CMV in subgroups I (GenBank Accession Nos. NC_001440, D00385, M57602, D28780, and AB008777) and II (GenBank Accession Nos. L15336, AF127976, AF198103, and M21464), respectively. Desert roses infected by Tomato spotted wilt virus (TSWV) (1) and CMV (2) have been reported previously. In spite of the plants showing mosaic symptoms similar to that caused by CMV (2) and chlorotic ringspots and line patterns caused by TSWV (1), only CMV was detected in and isolated from these infected desert roses. However, the possibility of mixed infection of CMV and other viruses were not excluded in this research. To our knowledge, this is the first report of CMV infection in desert rose plants occurring in Taiwan. References: (1) S. Adkins and C. A. Baker. Plant Dis. 89:526, 2005. (2) C. A. Baker et al. Plant Dis. 87:1007, 2003. (3) Y. K. Chen et al. Arch. Virol. 146:1631, 2001. (4) Y. K. Chen and C. C. Yang. Plant Dis. 89:529, 2005.

Sign in / Sign up

Export Citation Format

Share Document