Methane and Hydrogen Production from Cotton Wastes in Dark Fermentation Process Under Anaerobic and Microaerobic Conditions

Author(s):  
Gaweł Sołowski ◽  
Izabela Konkol ◽  
Adam Cenian
2019 ◽  
Author(s):  
◽  
Nonsikelelo Precios Mthethwa

Aquatic weeds are well known for their fast growth rate and high carbohydrate content that can be easily hydrolysed into fermentable sugars. This study was aimed at the utilization of an indigenous aquatic weed, Pistia stratiotes for biohydrogen production through the dark fermentation process. Characterization of the biomass, effect of pre–treatment methods on biomass hydrolysis, effect of reactor operational conditions and type of inoculum on enhancing hydrogen production potential of P. stratiotes was assessed. Physical and chemical pre–treatments were employed on P. stratiotes biomass to increase digestibility and to achieve high conversion rates of fermentable sugars. The highest sugar yield of 139± 0.8 mg/g was obtained when the oven dried biomass was subjected to H2SO4 (2.5%) pre– treatment followed by autoclaving at 121°C for 30 min. Biohydrogen production under different operational conditions was thereafter optimized using One–factor–at–a–time (OFAT) batch experiments in 120 mL serum bottles. A maximum hydrogen yield (HY) of 2.46 ± 0.14 mol-H2/mol-glucose (3.51 ± 0.20 mg-H2/g-dry weight) and 2.75 ± 0.07 mL h-1 hydrogen production rate was observed under optimized conditions (pH 5.5, Temp 35°C, S/X: 1.0 g-COD/g-VSS and HRT 8 h). The organic mass balance (92 – 96%) and electron– equivalent balance (92 – 98%) further indicated the reliability of the obtained fermentation data. Assessment of microbial activity was achieved using molecular techniques such as quantitative polymerase chain reaction (qPCR) targeting both 16s rRNA (of Clostridium spp., Bacillus spp., and Enterobacter spp.) and the functional hydrogenase gene (hydA). The highest gene activity of hydrogenase was noted at pH of 5.5 with 2.53×104 copies/ng-DNA compared to low pH: 4.5 (6.95 × 103 copies/ng-DNA) and high pH: 8.5 (7.77×103 copies/ng- DNA). A similar trend was also observed for the species containing a highly active hydrogenase (i.e. Clostridium spp., Bacillus spp., and Enterobacter spp.). During the optimum reactor conditions, three hydrogen producing bacterial strains Bacillus cereus and Enterobacter cloacae were successfully isolated. These isolates were used as inoculums for the pure culture studies and achieved HYs of 2.2, 1.10 and 1.97 mol-H2/mol-glucose respectively under optimized fermentation conditions. However, the thermally treated mixed culture displayed a marginally higher HY (2.46 mol-H2/mol-glucose) compared to the pure culture used alone. Furthermore, the cost estimation indicated a potential and economically feasible for biotransformation of P. stratiotes to hydrogen energy. In conclusion, the results from this study has revealed the potential of employing P. stratiotes biomass for biohydrogen production. The results also indicated the importance of employing suitable pre–treatment methods, operating conditions as well as inoculum types for enhanced hydrogen production using P. stratiotes.


Author(s):  
Carol J. Rangel ◽  
Mario A. Hernández ◽  
Jhessica D. Mosquera ◽  
Yesid Castro ◽  
Ivan O. Cabeza ◽  
...  

2018 ◽  
Vol 286 ◽  
pp. 71-78 ◽  
Author(s):  
J.S. Silva ◽  
J.S. Mendes ◽  
J.A.C. Correia ◽  
M.V.P. Rocha ◽  
L. Micoli

2016 ◽  
Author(s):  
◽  
Karen Reddy

Anaerobic dark fermentation is an efficient biological process to produce hydrogen from waste material. In South Africa, this technology has not been explored adequately to extract energy from biological wastes. Within the KwaZulu Natal region of South Africa, the sugar industry is a prominent venture that produces mass quantities of sugarcane bagasse amongst other waste products. This by-product can be an ideal source of substrate for biohydrogen generation. In this study, sugarcane bagasse was used as the main substrate for biohydrogen production by anaerobic fermentation using sewage sludge as the inoculum. Different pre-treatment methods were employed to maximize the release of fermentable sugars from the lignocellulosic biomass. Among the different pre-treatment methods employed, the maximum sugar yield (294.4 mg/g) was achieved with 0.25% H2SO4 for 60 minutes at 121°C. Prior to inoculation, the sewage sludge was also subjected to thermal pre-treatment to eliminate methanogens. Thermal pre-treatment of inoculum sludge for 30 min was effective in eliminating methanogens. Fluorescence in situ hybridization was used to positively identify the hydrogen producing bacteria present before and after treatment. The pre-treated substrate and inoculum was integrated into a dark fermentation process to further optimize the effect of pH, substrate to biomass, iron and magnetite nanoparticles on hydrogen production. The maximum hydrogen production (1.2 mol/mol glucose) was achieved at a pH range of 5-6, a substrate to biomass ratio of 3.5, and iron and magnetite nanoparticle concentration of 200 mg/L. Microbial analysis using quantitative polymerase chain reaction has confirmed the dominance of Clostridium spp. in the reactor. The highest hydrogenase gene activity (number of copies of hydrogenase gene expression/ng DNA) was recorded in the reactor supplemented with magnetite nanoparticles with lowest being in the raw sludge. There was a direct positive correlation between the hydrogenase gene copy number and the hydrogen yield obtained at different reactor conditions. Scanning electron microscopy was a useful to visually analyse the interaction of microorganisms with activated sludge. This study highlights the significance of anaerobic microorganisms from waste sludge being able to utilize agricultural waste material to produce biohydrogen which could be further scaled up for continuous hydrogen production. In addition, statistical tools used to predict the possible sugar (Design of experiments) and hydrogen yields (Gompertz model) produced would be helpful in saving time during full-scale operation of biohydrogen producing reactors.


2020 ◽  
Vol 297 ◽  
pp. 122504 ◽  
Author(s):  
Yameng Li ◽  
Zhiping Zhang ◽  
Quanguo Zhang ◽  
Nadeem Tahir ◽  
Yanyan Jing ◽  
...  

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
R. M. Silva ◽  
A. A. Abreu ◽  
A. F. Salvador ◽  
M. M. Alves ◽  
I. C. Neves ◽  
...  

AbstractThermophilic biohydrogen production by dark fermentation from a mixture (1:1) of C5 (arabinose) and C6 (glucose) sugars, present in lignocellulosic hydrolysates, and from Sargassum sp. biomass, is studied in this work in batch assays and also in a continuous reactor experiment. Pursuing the interest of studying interactions between inorganic materials (adsorbents, conductive and others) and anaerobic bacteria, the biological processes were amended with variable amounts of a zeolite type-13X in the range of zeolite/inoculum (in VS) ratios (Z/I) of 0.065–0.26 g g−1. In the batch assays, the presence of the zeolite was beneficial to increase the hydrogen titer by 15–21% with C5 and C6-sugars as compared to the control, and an increase of 27% was observed in the batch fermentation of Sargassum sp. Hydrogen yields also increased by 10–26% with sugars in the presence of the zeolite. The rate of hydrogen production increased linearly with the Z/I ratios in the experiments with C5 and C6-sugars. In the batch assay with Sargassum sp., there was an optimum value of Z/I of 0.13 g g−1 where the H2 production rate observed was the highest, although all values were in a narrow range between 3.21 and 4.19 mmol L−1 day−1. The positive effect of the zeolite was also observed in a continuous high-rate reactor fed with C5 and C6-sugars. The increase of the organic loading rate (OLR) from 8.8 to 17.6 kg m−3 day−1 of COD led to lower hydrogen production rates but, upon zeolite addition (0.26 g g−1 VS inoculum), the hydrogen production increased significantly from 143 to 413 mL L−1 day−1. Interestingly, the presence of zeolite in the continuous operation had a remarkable impact in the microbial community and in the profile of fermentation products. The effect of zeolite could be related to several properties, including the porous structure and the associated surface area available for bacterial adhesion, potential release of trace elements, ion-exchanger capacity or ability to adsorb different compounds (i.e. protons). The observations opens novel perspectives and will stimulate further research not only in biohydrogen production, but broadly in the field of interactions between bacteria and inorganic materials.


Sign in / Sign up

Export Citation Format

Share Document