Optimum Selection of the Reference Signal for Correlation Receiver Applied to Marker Localization

Author(s):  
Martin Vestenický ◽  
Peter Vestenický
Author(s):  
G. N. Maltsev ◽  
A. V. Evteev

Introduction: Radio information transmission systems with noise-like phase-shift keyed signals based on pseudo-random sequences have potential noise immunity provided by accurately tracking the delay of the received signal in the correlation receiver. When working with moving objects, the delay of the received signal varies continuously, and the reception quality for noise-like phase-shifted signals highly depends on the synchronization system operation and on the accuracy of estimating the received signal delay by the tracking system. To ensure the required signal reception quality, it is necessary to provide an informed choice of tracking system parameters, taking into account their effects, which are the random and systematic components of the delay tracking error, on the selected noise immunity indicator.Purpose: Analyzing how the errors in tracking the delay of a received phase-shift keyed signal based on a pseudorandom sequence by the synchronization system of a radio information transmission system can affect the probability of erroneous reception of an information symbol.Results: The calculation method was used to obtain families of dependencies of the probability of erroneous reception of an information symbol on the signal-noise ratio (SNR), and the values of the random and systematic components of the delay tracking error which are normalized to the capture band of the correlation receiver. It has been shown that at a fixed SNR, the values of the random and systematic components of the delay tracking error are critical for the erroneous reception probability. In all the cases discussed, all the dependencies are characterized by a slow change of the erroneous reception probability while the synchronization errors within the area of small SNR have fixed values. As the SNR value grows, the erroneous reception probability rapidly drops. To ensure the specified signal reception quality and the reliability of the selection of information symbols and messages in a radio information transmission system with noise-like phase-manipulated signals, its synchronization system requires a joint selection of the tracking system parameters, taking into account the limitations imposed by the operating conditions and technical implementation features.Practical relevance: The obtained results can be used in noise immunity analysis of radio information transmission systems with noise-like phase-shift keyed signals in a wide range of communication conditions, and in providing technical solutions for synchronization systems ensuring the required quality of signal reception.


Materials ◽  
2018 ◽  
Vol 12 (1) ◽  
pp. 112 ◽  
Author(s):  
Alex Iglesias ◽  
Zoltan Dombovari ◽  
German Gonzalez ◽  
Jokin Munoa ◽  
Gabor Stepan

Cutting capacity can be seriously limited in heavy duty face milling processes due to self-excited structural vibrations. Special geometry tools and, specifically, variable pitch milling tools have been extensively used in aeronautic applications with the purpose of removing these detrimental chatter vibrations, where high frequency chatter related to slender tools or thin walls limits productivity. However, the application of this technique in heavy duty face milling operations has not been thoroughly explored. In this paper, a method for the definition of the optimum angles between inserts is presented, based on the optimum pitch angle and the stabilizability diagrams. These diagrams are obtained through the brute force (BF) iterative method, which basically consists of an iterative maximization of the stability by using the semidiscretization method. From the observed results, hints for the selection of the optimum pitch pattern and the optimum values of the angles between inserts are presented. A practical application is implemented and the cutting performance when using an optimized variable pitch tool is assessed. It is concluded that with an optimum selection of the pitch, the material removal rate can be improved up to three times. Finally, the existence of two more different stability lobe families related to the saddle-node and flip type stability losses is demonstrated.


2021 ◽  
Author(s):  
K Harshavardhana Reddy ◽  
Sachin Sharma ◽  
B. Madhuri ◽  
K Shivarama Krishna

2021 ◽  
pp. 2813-2823
Author(s):  
Firas A. Hadi ◽  
Zaid F. Makki ◽  
Rafa A. Al-Baldawi

The main objective of this paper is present a novel method to choice a certain wind turbine for a specific site by using normalized power and capacity factor curves. The site matching is based on identifying the optimum turbine rotation speed parameters from turbine performance index (TPI) curve, which is obtained from the higher values of normalized power and capacity factor curves. Wind Turbine Performance Index a new ranking parameter, is defined to optimally match turbines to wind site. The relations (plots) of normalized power, capacity factor, and turbine performance index versus normalized rated wind speed are drawn for a known value of Weibull shape parameter of a site, thus a superior method is used for Weibull parameters estimation which is called Equivalent Energy Method (EEM).


Sign in / Sign up

Export Citation Format

Share Document