On Friction-Stir Welding of 3D Printed Thermoplastics

2019 ◽  
pp. 75-91 ◽  
Author(s):  
Sunpreet Singh ◽  
Chander Prakash ◽  
Munish K. Gupta
Keyword(s):  
Friction Stir Welding ◽  
Friction Stir ◽  
3D Printed

scholarly journals 3D-Printed Tool Shoulder Design for the Analogue Modelling of Bobbin Friction Stir Weld Joint Quality

2021 ◽  
Vol 21 (1) ◽  
pp. 27-42
Author(s):  
A. Tamadon ◽  
D. J. Pons ◽  
K. Chakradhar ◽  
J. Kamboj ◽  
D. Clucas
Keyword(s):  
Friction Stir Welding ◽  
Cross Sections ◽  
Weld Joint ◽  
Flow Patterns ◽  
Friction Stir Weld ◽  
Butt Weld ◽  
Friction Stir ◽  
Tool Shoulder ◽  
Analogue Modelling ◽  
3D Printed

Abstract A variety of tool shoulder designs comprising three families i.e. blade, spiral and circular shaped scrolls, were produced to improve the material flow and restrictions to avoid the tunnel void. The bobbin tools were manufactured by 3D printing additive manufacturing technology using solid filament. The butt weld joint was produced by each tool using plasticine as the workpiece material. The apparent surface features and bi-colour cross-sections provided a physical flow comparison among the shoulder designs. For the bobbin friction stir welding (BFSW), the tool shoulder with a three-spiral design produced the most stability with the best combination of the flow patterns on surface and cross-sections. The circular family tools showed a suitable intermixing on the surface pattern, while the blade scrolls showed better flow features within the cross-sections. The flow-driven effect of the shoulder features of the bobbin-tool design (inscribed grooves) was replicated by the 3D-printed tools and the analogue modelling of the weld samples. Similar flow patterns were achieved by dissimilar aluminium-copper weld, validating the accuracy of the analogue plasticine for the flow visualization of the bobbin friction stir welding.

Effect of Tool Rotational Speed and Traverse Speed on Friction Stir Welding of 3D-Printed Polylactic Acid Material

2021 ◽  
Author(s):  
S. M. Senthil ◽  
Manickam Bhuvanesh Kumar
Keyword(s):  
Friction Stir Welding ◽  
Polylactic Acid ◽  
Rotational Speed ◽  
Traverse Speed ◽  
Tool Rotational Speed ◽  
Butt Weld ◽  
Friction Stir ◽  
Welding Technology ◽  
Joint Efficiency ◽  
3D Printed

Joining of polymers are usually carried out using adhesives that has a deteriorating quality at elevated working conditions thus limiting its application areas. Friction stir welding (FSW) is a growing solid-state welding technology, with applications including the welding of lightweight materials. FSW was recently introduced for joining thermoplastics materials and found successful. This study attempts in employing FSW to join polylactic acid (PLA)-based 3D printed engineering components and assess the effect of FSW process parameters (tool rotational speed and traverse speed) on the weld property. The present work uses the FSW process to butt weld 5 mm thick 3D printed PLA sheets with taper cylindrical profiled tool. For the experimentation, three different combinations of feed rates and pin rotational speeds are considered. Based on joint efficiency evaluation, it is found that tool rotational speed of 1400 rpm combined with 10 mm/min transverse speed produces the weld with high joint efficiency of 40%.

Joining of 3D-printed AlSi10Mg by friction stir welding

2018 ◽  
Vol 62 (3) ◽  
pp. 675-682 ◽  
Author(s):  
Z. Du ◽  
M. J. Tan ◽  
H. Chen ◽  
G. Bi ◽  
C. K. Chua
Keyword(s):  
Friction Stir Welding ◽  
Friction Stir ◽  
3D Printed

Investigations on friction stir joining of 3D printed parts to overcome bed size limitation and enhance joint quality for unmanned aircraft systems

2020 ◽  
Vol 234 (24) ◽  
pp. 4857-4871
Author(s):  
Vivek Kumar Tiwary ◽  
NJ Ravi ◽  
P Arunkumar ◽  
S Shivakumar ◽  
Anand S Deshpande ◽  
...  
Keyword(s):  
Friction Stir Welding ◽  
3D Printing ◽  
Unmanned Aircraft ◽  
Taper Angle ◽  
Material Combination ◽  
Friction Stir ◽  
Size Limitation ◽  
3D Printed ◽  
Tool Pin ◽  
Welding Technique

3D printing technology is making its mark in automotive, aerospace, and bio-medical-related industries. It is considered a viable option for the direct manufacturing of final parts. However, it is not possible to print longer parts in a single attempt due to the bed size limitation of printers. This problem can be addressed by employing a polymer joining technique as a secondary operation. Moreover, low mechanical strength and inferior geometrical qualities like the flatness of the joined parts restrict its real-time industrial application. Here, an attempt is made to join a longer part (typical of an aircraft wing) using friction stir welding technique. Joining was performed on 3D printed similar/dissimilar thermoplastic parts. Tensile test results showed that friction stir welding of 3D printed parts (for both similar/dissimilar) produced relatively weaker joints compared to the base material. Various important process parameters of 3D printing and friction stir welding technique, namely part infill percentage, material combination, tool rotational speed, traverse speed, and tool pin taper angle were optimized by means of ANOVA. Optimization was aimed at maximizing the weld strength, elongation, hardness, and desired flatness. The results suggested that the material combination and tool pin taper angle play a significant role in the weld's strength as well as its geometric properties (flatness). The results were validated by adopting the optimized parameters for successful joining of the wing section of an unmanned aerial vehicle. A span of 320 mm, with a metrological acceptable flatness value of 0.41 µ/m could be successfully achieved on an existing 3D printer whose bed size limit was 240 mm.

Microstructural and Mechanical Behaviour Evaluation of Mg-Al-Zn Alloy Friction Stir Welded Joint

2020 ◽  
Vol 17 (3) ◽  
pp. 8150-8159
Author(s):  
Kulwant Singh ◽  
Gurbhinder Singh ◽  
Harmeet Singh
Keyword(s):  
Heat Treatment ◽  
Friction Stir Welding ◽  
Magnesium Alloys ◽  
Mechanical Performance ◽  
Fuel Efficiency ◽  
Research Work ◽  
Grain Structure ◽  
Tensile Fracture ◽  
Friction Stir ◽  
The Impact

The weight reduction concept is most effective to reduce the emissions of greenhouse gases from vehicles, which also improves fuel efficiency. Amongst lightweight materials, magnesium alloys are attractive to the automotive sector as a structural material. Welding feasibility of magnesium alloys acts as an influential role in its usage for lightweight prospects. Friction stir welding (FSW) is an appropriate technique as compared to other welding techniques to join magnesium alloys. Field of friction stir welding is emerging in the current scenario. The friction stir welding technique has been selected to weld AZ91 magnesium alloys in the current research work. The microstructure and mechanical characteristics of the produced FSW butt joints have been investigated. Further, the influence of post welding heat treatment (at 260 °C for 1 h) on these properties has also been examined. Post welding heat treatment (PWHT) resulted in the improvement of the grain structure of weld zones which affected the mechanical performance of the joints. After heat treatment, the tensile strength and elongation of the joint increased by 12.6 % and 31.9 % respectively. It is proven that after PWHT, the microhardness of the stir zone reduced and a comparatively smoothened microhardness profile of the FSW joint obtained. No considerable variation in the location of the tensile fracture was witnessed after PWHT. The results show that the impact toughness of the weld joints further decreases after post welding heat treatment.

Friction stir welding

2010 ◽  
Author(s):  
Daniela Lohwasser ◽  
Zhan Chen
Keyword(s):  
Friction Stir Welding ◽  
Friction Stir
Sign in / Sign up

Export Citation Format

Share Document