scholarly journals BISM: Bytecode-Level Instrumentation for Software Monitoring

Author(s):  
Chukri Soueidi ◽  
Ali Kassem ◽  
Yliès Falcone
Keyword(s):  
2021 ◽  
Vol 1025 ◽  
pp. 104-109
Author(s):  
Nur Husnina Iffah Bakar ◽  
Noor Suhana Adzahar ◽  
Thong Chuan Lee ◽  
Rama Yusvana ◽  
Raha Ahmad Raus

Azolla Filliculoides has been utilized as biofertilizer to increase productivity and yield of paddy. Azolla was used as a good source of nutrient to the paddy plant. In this study, we investigated the growth and productivity of paddy plant supplemented with liquid Azolla biofertilizer. The preparation of Azolla was monitored under several parameters such as pH, dissolved oxygen, temperature, and salinity in an aquaponics system. Water quality analysis of the aquaponic system was monitored by using the Arduino system which the customized design that consists of a microcontroller to record the parameters directly to the computing device in a single optimum and efficient system. The nutrient composition of liquid Azolla biofertilizer was analyzed by using Inductively Coupled Plasma Mass Spectrometry (ICP/MS) and CHNS elemental analysers. hows that liquid Azolla contents 0.958% nitrogen, 15.5 ppm phosphorus and 159.8 ppm potassium. After four months, the yield of paddy on Azolla was 149.12 kg/he with the productivity of 63.157 kg/he/year. This application helped to an efficient monitoring system for measure high yield and productivity of biofertilizer by Arduino software monitoring. This study can act as an initial step for the web-based automated control and monitoring of the food production system.


Author(s):  
Sean Callanan ◽  
Daniel J. Dean ◽  
Michael Gorbovitski ◽  
Radu Grosu ◽  
Justin Seyster ◽  
...  
Keyword(s):  

2009 ◽  
Vol 5 (4) ◽  
pp. 231-241 ◽  
Author(s):  
Hui Liang ◽  
Jin Song Dong ◽  
Jing Sun ◽  
W. Eric Wong

2014 ◽  
Vol 635-637 ◽  
pp. 1212-1215
Author(s):  
Ruo Han Liu ◽  
Chun Hua Li

In order to realize intelligent control, the cutting trajectory of TBM research machine adopts the principle of teaching and reappearing cutting trajectory control method, combining with the control system of teaching and reappearing and SIMATIC C7, operation interface is realized by using configuration software monitoring, monitoring site visually through the operation panel parameters change, timely adjust the cutting parameters. The experimental results show that the tracking error within the scope of the permit. The method to improve the intelligence of machine cutting control provides a reference basis.


2003 ◽  
Vol 48 (6-7) ◽  
pp. 221-235 ◽  
Author(s):  
J. Garcı́a ◽  
J. Entrialgo ◽  
D.F. Garcı́a ◽  
J.L. Dı́az ◽  
F.J. Suárez

Sign in / Sign up

Export Citation Format

Share Document