Morphological Evolution of Somma-Vesuvio During the Last Century: Integration Between Historical Maps and Airborne LiDAR Survey

2020 ◽  
pp. 311-320
Author(s):  
Marina Bisson ◽  
Alessandro Tadini ◽  
Roberto Gianardi ◽  
Andrea Angioletti
Keyword(s):  
Morphological Evolution ◽  
Airborne Lidar ◽  
Historical Maps

scholarly journals On the morphological evolution of restored banks: Case study of the Meuse river

2018 ◽  
Vol 40 ◽  
pp. 02021 ◽  
Author(s):  
Gonzalo Duró ◽  
Alessandra Crosato ◽  
Maarten Kleinhans ◽  
Wim Uijttewaal
Keyword(s):  
Water Level ◽  
Case Studies ◽  
Morphological Evolution ◽  
Airborne Lidar ◽  
Aerial Photographs ◽  
Water Level Fluctuations ◽  
Erosion Rates ◽  
Erosion Processes ◽  
Riparian Trees ◽  
Meuse River

In recent years, many riverbanks in Europe had their protections removed to reactivate natural erosion processes and improve riparian habitats. Yet, other river functions may be affected, such as navigation and flood conveyance. The quantification and prediction of erosion rates and volumes is then relevant to manage and control the integrity of all river functions. This work studies the morphological evolution of riverbanks along two restored reaches of the Meuse River in the Netherlands, which are taken as case studies. This river is an important navigation route and for this its water level is strongly regulated with weirs. Through aerial photographs and two airborne LIDAR surveys, we analysed the evolution over nine years of restoration and reconstructed the topography along 2.2 km. of banks. An extraordinary low-water level after a ship accident provided the opportunity to observe and measure the bank toe. The banks show a terrace of erosion close to the normally regulated water level, highly irregular erosion rates up to 7 m/year, embayments evolving with upstream and downstream shifts, and sub-reaches with uniform erosion. Probable causes of erosion include ship-waves, high water flows and water level fluctuations. Distinct patterns might be explained by the presence of riparian trees and soil strata of different compositions. These intriguing case studies will continue to be studied to disentangle the role of different erosion drivers, predict erosion magnitudes and establish whether bank erosion will stop or continue in the future.

A quantitative image analysis method for the determination of cocontinuity in polymer blends

1993 ◽  
Vol 51 ◽  
pp. 894-895
Author(s):  
William A. Heeschen
Keyword(s):  
Image Analysis ◽  
Polymer Blends ◽  
Quantitative Measurement ◽  
Morphological Evolution ◽  
Phase Ratio ◽  
Irregular Shapes ◽  
Quantitative Image ◽  
Discrete Domains ◽  
A Domains

Two new morphological measurements based on digital image analysis, CoContinuity and CoContinuity Balance, have been developed and implemented for quantitative measurement of morphology in polymer blends. The morphology of polymer blends varies with phase ratio, composition and processing. A typical morphological evolution for increasing phase ratio of polymer A to polymer B starts with discrete domains of A in a matrix of B (A/B < 1), moves through a cocontinuous distribution of A and B (A/B ≈ 1) and finishes with discrete domains of B in a matrix of A (A/B > 1). For low phase ratios, A is often seen as solid convex particles embedded in the continuous B phase. As the ratio increases, A domains begin to evolve into irregular shapes, though still recognizable as separate domains. Further increase in the phase ratio leads to A domains which extend into and surround the B phase while the B phase simultaneously extends into and surrounds the A phase.

Urban energetics applications and Geomatic technologies in a Smart City perspective

2015 ◽  
Vol 6 (1) ◽  
pp. 19-29 ◽  
Author(s):  
G. Bitelli ◽  
P. Conte ◽  
T. Csoknyai ◽  
E. Mandanici
Keyword(s):  
Smart City ◽  
Laser Scanning ◽  
Near Infrared ◽  
Three Dimensional ◽  
Energy Sector ◽  
Primary Objective ◽  
Airborne Lidar ◽  
City Management ◽  
Urban Context ◽  
Research Areas

The management of an urban context in a Smart City perspective requires the development of innovative projects, with new applications in multidisciplinary research areas. They can be related to many aspects of city life and urban management: fuel consumption monitoring, energy efficiency issues, environment, social organization, traffic, urban transformations, etc. Geomatics, the modern discipline of gathering, storing, processing, and delivering digital spatially referenced information, can play a fundamental role in many of these areas, providing new efficient and productive methods for a precise mapping of different phenomena by traditional cartographic representation or by new methods of data visualization and manipulation (e.g. three-dimensional modelling, data fusion, etc.). The technologies involved are based on airborne or satellite remote sensing (in visible, near infrared, thermal bands), laser scanning, digital photogrammetry, satellite positioning and, first of all, appropriate sensor integration (online or offline). The aim of this work is to present and analyse some new opportunities offered by Geomatics technologies for a Smart City management, with a specific interest towards the energy sector related to buildings. Reducing consumption and CO2 emissions is a primary objective to be pursued for a sustainable development and, in this direction, an accurate knowledge of energy consumptions and waste for heating of single houses, blocks or districts is needed. A synoptic information regarding a city or a portion of a city can be acquired through sensors on board of airplanes or satellite platforms, operating in the thermal band. A problem to be investigated at the scale A problem to be investigated at the scale of the whole urban context is the Urban Heat Island (UHI), a phenomenon known and studied in the last decades. UHI is related not only to sensible heat released by anthropic activities, but also to land use variations and evapotranspiration reduction. The availability of thermal satellite sensors is fundamental to carry out multi-temporal studies in order to evaluate the dynamic behaviour of the UHI for a city. Working with a greater detail, districts or single buildings can be analysed by specifically designed airborne surveys. The activity has been recently carried out in the EnergyCity project, developed in the framework of the Central Europe programme established by UE. As demonstrated by the project, such data can be successfully integrated in a GIS storing all relevant data about buildings and energy supply, in order to create a powerful geospatial database for a Decision Support System assisting to reduce energy losses and CO2 emissions. Today, aerial thermal mapping could be furthermore integrated by terrestrial 3D surveys realized with Mobile Mapping Systems through multisensor platforms comprising thermal camera/s, laser scanning, GPS, inertial systems, etc. In this way the product can be a true 3D thermal model with good geometric properties, enlarging the possibilities in respect to conventional qualitative 2D images with simple colour palettes. Finally, some applications in the energy sector could benefit from the availability of a true 3D City Model, where the buildings are carefully described through three-dimensional elements. The processing of airborne LiDAR datasets for automated and semi-automated extraction of 3D buildings can provide such new generation of 3D city models.

Operando Visualization of Morphological Dynamics in All-Solid-State Batteries

2019 ◽  
Author(s):  
Xiaohan Wu ◽  
Juliette Billaud ◽  
Iwan Jerjen ◽  
Federica Marone ◽  
Yuya Ishihara ◽  
...  
Keyword(s):  
Solid State ◽  
Solid Electrolytes ◽  
Rational Design ◽  
Morphological Evolution ◽  
Active Material ◽  
Composite Layer ◽  
Transference Number ◽  
Thermal Stabilities ◽  
Solid State Batteries ◽  
All Solid State Batteries

<div> <div> <div> <p>All-solid-state batteries are considered as attractive options for next-generation energy storage owing to the favourable properties (unit transference number and thermal stabilities) of solid electrolytes. However, there are also serious concerns about mechanical deformation of solid electrolytes leading to the degradation of the battery performance. Therefore, understanding the mechanism underlying the electro-mechanical properties in SSBs are essentially important. Here, we show three-dimensional and time-resolved measurements of an all-solid-state cell using synchrotron radiation x-ray tomographic microscopy. We could clearly observe the gradient of the electrochemical reaction and the morphological evolution in the composite layer. Volume expansion/compression of the active material (Sn) was strongly oriented along the thickness of the electrode. While this results in significant deformation (cracking) in the solid electrolyte region, we also find organized cracking patterns depending on the particle size and their arrangements. This study based on operando visualization therefore opens the door towards rational design of particles and electrode morphology for all-solid-state batteries. </p> </div> </div> </div>

USGS, NPS, and NASA investigate horse-grazing impacts on Assateague Island dunes using airborne lidar surveys

2001 ◽  
Author(s):  
Georgia H. Stoppelaire ◽  
John Brock ◽  
Chris Lea ◽  
Mark Duffy ◽  
William Krabill
Keyword(s):  
Airborne Lidar ◽  
Grazing Impacts ◽  
Assateague Island

Données LiDAR aériennes: pertinence de l'interprétation visuelle pour la foresterie

2017 ◽  
Vol 168 (3) ◽  
pp. 127-133
Author(s):  
Matthew Parkan
Keyword(s):  
Cross Sections ◽  
Forest Edge ◽  
Airborne Lidar ◽  
Visual Interpretation ◽  
Individual Tree ◽  
Small Areas ◽  
Interactive 3D ◽  
The Individual ◽  
Airborne Lidar Data ◽  
Stem Position

Airborne LiDAR data: relevance of visual interpretation for forestry Airborne LiDAR surveys are particularly well adapted to map, study and manage large forest extents. Products derived from this technology are increasingly used by managers to establish a general diagnosis of the condition of forests. Less common is the use of these products to conduct detailed analyses on small areas; for example creating detailed reference maps like inventories or timber marking to support field operations. In this context, the use of direct visual interpretation is interesting, because it is much easier to implement than automatic algorithms and allows a quick and reliable identification of zonal (e.g. forest edge, deciduous/persistent ratio), structural (stratification) and point (e.g. tree/stem position and height) features. This article examines three important points which determine the relevance of visual interpretation: acquisition parameters, interactive representation and identification of forest characteristics. It is shown that the use of thematic color maps within interactive 3D point cloud and/or cross-sections makes it possible to establish (for all strata) detailed and accurate maps of a parcel at the individual tree scale.

Sign in / Sign up

Export Citation Format

Share Document