Genetic manipulation of pyoverdine non-ribosomal peptide synthetases to identify genetic constraints to effective domain recombination

<p>Non-ribosomal peptide synthetases (NRPSs) synthesise small highly diverse peptides with a wide range of activities, such as antibiotics, anticancer drugs, and immunosuppressants. NRPS synthesis often resembles an assembly line, in which each module acts in a linear order to add one monomer to the growing peptide chain. In the basic mechanism of synthesis, an adenylation (A) domain within each module activates a specific monomer. Once activated, the monomer is attached to an immediately downstream thiolation (T) domain via a prosthetic phosphopantheine group, which acts as a flexible arm to pass the substrate between catalytic domains. A condensation (C) domain, upstream to the A-T domains, catalyses peptide bond formation between an acceptor substrate attached to the T domain and a donor substrate attached to the T domain of the upstream module. The peptide remains attached to the T domain of the acceptor substrate, and then acts as the donor substrate for the next C domain. When peptide synthesis reaches the final module, the peptide is released by a thioesterase (TE) domain. The linear mode of synthesis and discrete functional domains within each module gives the potential to generate new products by substituting domains or entire modules with ones that activate alternative substrates. Attempts to create new products using domain and module substitution often result in a loss of activity. The work in this thesis focuses on identifying barriers to effective domain substitution. The NRPS enzyme pvdD, which adds the final residue to the eleven residue non-ribosomal peptide pyoverdine, was developed as a model for domain substitution. The primary benefit for using this model is that pyoverdine creates easily detectible fluorescent products. The first set of experiments focused on testing the limitations of A domain and C-A domain substitutions to alter pyoverdine. Nine A domain and nine C-A domain substitution pvdD variants were constructed and used to complement a P. aeruginosa PAO1 pvdD deletion strain. The A domain substitutions that specified the wild type substrate were highly functional, whereas A domains that specified other substrates resulted in low levels of wild type pyoverdine production. This suggests the acceptor site substrate specificity of the C domain limited the success of A domain substitutions, rather than disruption of the C/A domain junction. In contrast, although C-A domain substitutions in pvdD in some cases synthesised novel pyoverdines, the majority lost function for unknown reasons. The high success rate A domain substitutions (when not limited by the acceptor site specificity of the C domain) suggested the addition of new C domains was a likely cause for loss of function. The second set of experiments investigated whether disrupting the protein interface between C domains and their upstream T domains may cause a loss in function of C-A domain substitutions. However, domain substitutions of T domains were found to have a high rate of success. Therefore, the results thus far confirmed that disrupting interactions of the C domain with A domains or T domains does not have a large affect on enzyme activity. An alternative explanation for the loss in function with C-A domain substitutions is that C domains translocated to a new enzyme are unable to process the new incoming donor peptide chain because of substrate specificity or steric constraints. To develop methods to circumvent limitations caused by the C domain, the final part of this thesis examined acceptor substrate specificity of C domains. Acceptor site substrate specificity was chosen over donor site specificity as it acts on only an amino acid rather than peptide chain. The substrate specificity was narrowed down to a small subsection of the C domain. This was an initial study of C domain substrate specificity, which may guide future development of relaxed specificity C domains.</p>

Genetic manipulation of pyoverdine non-ribosomal peptide synthetases to identify genetic constraints to effective domain recombination

<p>Non-ribosomal peptide synthetases (NRPSs) synthesise small highly diverse peptides with a wide range of activities, such as antibiotics, anticancer drugs, and immunosuppressants. NRPS synthesis often resembles an assembly line, in which each module acts in a linear order to add one monomer to the growing peptide chain. In the basic mechanism of synthesis, an adenylation (A) domain within each module activates a specific monomer. Once activated, the monomer is attached to an immediately downstream thiolation (T) domain via a prosthetic phosphopantheine group, which acts as a flexible arm to pass the substrate between catalytic domains. A condensation (C) domain, upstream to the A-T domains, catalyses peptide bond formation between an acceptor substrate attached to the T domain and a donor substrate attached to the T domain of the upstream module. The peptide remains attached to the T domain of the acceptor substrate, and then acts as the donor substrate for the next C domain. When peptide synthesis reaches the final module, the peptide is released by a thioesterase (TE) domain. The linear mode of synthesis and discrete functional domains within each module gives the potential to generate new products by substituting domains or entire modules with ones that activate alternative substrates. Attempts to create new products using domain and module substitution often result in a loss of activity. The work in this thesis focuses on identifying barriers to effective domain substitution. The NRPS enzyme pvdD, which adds the final residue to the eleven residue non-ribosomal peptide pyoverdine, was developed as a model for domain substitution. The primary benefit for using this model is that pyoverdine creates easily detectible fluorescent products. The first set of experiments focused on testing the limitations of A domain and C-A domain substitutions to alter pyoverdine. Nine A domain and nine C-A domain substitution pvdD variants were constructed and used to complement a P. aeruginosa PAO1 pvdD deletion strain. The A domain substitutions that specified the wild type substrate were highly functional, whereas A domains that specified other substrates resulted in low levels of wild type pyoverdine production. This suggests the acceptor site substrate specificity of the C domain limited the success of A domain substitutions, rather than disruption of the C/A domain junction. In contrast, although C-A domain substitutions in pvdD in some cases synthesised novel pyoverdines, the majority lost function for unknown reasons. The high success rate A domain substitutions (when not limited by the acceptor site specificity of the C domain) suggested the addition of new C domains was a likely cause for loss of function. The second set of experiments investigated whether disrupting the protein interface between C domains and their upstream T domains may cause a loss in function of C-A domain substitutions. However, domain substitutions of T domains were found to have a high rate of success. Therefore, the results thus far confirmed that disrupting interactions of the C domain with A domains or T domains does not have a large affect on enzyme activity. An alternative explanation for the loss in function with C-A domain substitutions is that C domains translocated to a new enzyme are unable to process the new incoming donor peptide chain because of substrate specificity or steric constraints. To develop methods to circumvent limitations caused by the C domain, the final part of this thesis examined acceptor substrate specificity of C domains. Acceptor site substrate specificity was chosen over donor site specificity as it acts on only an amino acid rather than peptide chain. The substrate specificity was narrowed down to a small subsection of the C domain. This was an initial study of C domain substrate specificity, which may guide future development of relaxed specificity C domains.</p>

Searching sequence databases for functional homologs using profile HMMs: how to set bit score thresholds?

UniProt and BFD databases together have 2.5 billion protein sequences. A large majority of these proteins have been electronically annotated. Automated annotation pipelines, vis-á-vis manual curation, have the advantage of scale and speed but are fraught with relatively higher error rates. This is because sequence homology does not necessarily translate to functional homology, molecular function specification is hierarchic and not all functional families have the same amount of experimental data that one can exploit for annotation. Consequently, customization of annotation workflow is inevitable to minimize annotation errors. In this study, we illustrate possible ways of customizing the search of sequence databases for functional homologs using profile HMMs. Choosing an optimal bit score threshold is a critical step in the application of HMMs. We illustrate ways in which an optimal bit score can be arrived at using four Case Studies. These are the single domain nucleotide sugar 6-dehydrogenase and lysozyme-C families, and SH3 and GT-A domains which are typically found as a part of multi-domain proteins. We also discuss the limitations of using profile HMMs for functional annotation and suggests some possible ways to partially overcome such limitations.

Synthesis, Structural Studies, and Anticancer Properties of [CuBr(PPh3)2(4,6-Dimethyl-2-Thiopyrimidine-κS]

CuBr(PPh3)2(4,6-dimethylpyrimidine-2-thione) (Cu-L) was synthesized by stirring CuBr(PPh3)3 and 4,6-dimethylpyrimidine-2-thione in dichloromethane. The crystal structure of Cu-L was obtained, and indicated that the complex adopts a distorted tetrahedral structure with several intramolecular hydrogen bonds. Moreover, a centrosymmetric dimer is formed by the intermolecular hydrogen bonding of the bromine acceptor created by symmetry operation 1−x, 1−y, 1−z to the methyl group (D3 = C42) of the pyrimidine–thione ligand. HSA-binding of Cu-L and its ligand were evaluated, revealing that Cu-L binds to HSA differently than its ligand. The HSA-bindings were modeled by molecular docking, which suggested that Cu-L binds to the II A domain while L binds between the I B and II A domains. Anticancer activities toward OVCAR-3 and HeLa cell lines were tested and indicated the significance of the copper center in enhancing the cytotoxic effect; negligible toxicities for L and Cu-L were observed towards a non-cancer cell line. The current study highlights the potential of copper(I)-phosphine complexes containing thione ligands as therapeutic agents.

Accidental Impurities in Epitaxial Pb(Zr0.2Ti0.8)O3 Thin Films Grown by Pulsed Laser Deposition and Their Impact on the Macroscopic Electric Properties

Structural and electrical properties of epitaxial Pb(Zr0.2Ti0.8)O3 films grown by pulsed laser deposition from targets with different purities are investigated in this study. One target was produced in-house by using high purity precursor oxides (at least 99.99%), and the other target was a commercial product (99.9% purity). It was found that the out-of-plane lattice constant is about 0.15% larger and the a domains amount is lower for the film grown from the commercial target. The polarization value is slightly lower, the dielectric constant is larger, and the height of the potential barrier at the electrode interfaces is larger for the film deposited from the pure target. The differences are attributed to the accidental impurities, with a larger amount in the commercial target as revealed by composition analysis using inductive coupling plasma-mass spectrometry. The heterovalent impurities can act as donors or acceptors, modifying the electronic characteristics. Thus, mastering impurities is a prerequisite for obtaining reliable and reproducible properties and advancing towards all ferroelectric devices.

Synthesis of Multi-Module Low Density Lipoprotein Receptor Class A Domains with Acid Labile Cyanopyridiniumylides (CyPY) as Aspartic Acid Masking Groups

<div><div><div><p>Low-Density Lipoprotein Receptor Class A Domains (LA modules) are common ligand-binding domains of transmembrane receptors of approximately 40 amino acids that are involved in several cellular processes including endocytosis of extracellular targets. Due to their wide-ranging function and distribution among different transmembrane receptors, LA modules are of high interest for therapeutic applications. However, the efficient chemical synthesis of LA modules and derivatives is hindered by complications, many arising from the high abundance of aspartic acid and consequent aspartimide formation. Here, we report a robust, efficient and general applicable chemical synthesis route for accessing such LA modules, demonstrated by the synthesis and folding of the LA3 and LA4 modules of the Low-Density Lipoprotein Receptor, as well as a heterodimeric LA3-LA4 constructed by chemical ligation. The synthesis of the aspartic acid-rich LA domain peptides is made possible by the use of cyanopyridiniumylides (CyPY) – reported here for the first time – as a masking group for carboxylic acids. We show that cyanopyridiniumylide masked aspartic acid monomers are readily available building blocks for solid phase peptide synthesis and successfully suppress aspartimide formation. Unlike previously reported ylide-based carboxylic acid protecting groups, CyPY protected aspartic acids are converted to the free carboxylic acid by acidic hydrolysis and are compatible with all common residues and protecting groups. The chemical synthesis of Cys- and Asp-rich LA modules enable new access to a class of difficult to provide, but promising protein domains.</p></div></div></div>

Synthesis of Multi-Module Low Density Lipoprotein Receptor Class A Domains with Acid Labile Cyanopyridiniumylides (CyPY) as Aspartic Acid Masking Groups

<div><div><div><p>Low-Density Lipoprotein Receptor Class A Domains (LA modules) are common ligand-binding domains of transmembrane receptors of approximately 40 amino acids that are involved in several cellular processes including endocytosis of extracellular targets. Due to their wide-ranging function and distribution among different transmembrane receptors, LA modules are of high interest for therapeutic applications. However, the efficient chemical synthesis of LA modules and derivatives is hindered by complications, many arising from the high abundance of aspartic acid and consequent aspartimide formation. Here, we report a robust, efficient and general applicable chemical synthesis route for accessing such LA modules, demonstrated by the synthesis and folding of the LA3 and LA4 modules of the Low-Density Lipoprotein Receptor, as well as a heterodimeric LA3-LA4 constructed by chemical ligation. The synthesis of the aspartic acid-rich LA domain peptides is made possible by the use of cyanopyridiniumylides (CyPY) – reported here for the first time – as a masking group for carboxylic acids. We show that cyanopyridiniumylide masked aspartic acid monomers are readily available building blocks for solid phase peptide synthesis and successfully suppress aspartimide formation. Unlike previously reported ylide-based carboxylic acid protecting groups, CyPY protected aspartic acids are converted to the free carboxylic acid by acidic hydrolysis and are compatible with all common residues and protecting groups. The chemical synthesis of Cys- and Asp-rich LA modules enable new access to a class of difficult to provide, but promising protein domains.</p></div></div></div>

Causality and Blame Judgments of Negative Side Effects of Actions May Differ for Different Institutional Domains

Cognitive factors are known to influence lay assessments of causality and blame for negative side effects of intentional actions but specific social determinants of such assessments remain relatively unexplored. In a full-factorial, intraindividual experiment using two blocks of analogous vignettes constructed for two particular institutional action domains (“medical” and “corporate dress code”), we tested the propositions that causality and blame judgments differ between (a) domains and depend on (b) the type of action originator; (c) the type of damage; and (d) the “remoteness” of damage from the originator. Our data demonstrate a significant difference between two institutional action domains: actors in “medical”-related vignettes are generally estimated to be more causally effective and blameworthy than actors in “dress code”–related vignettes. In addition to the pronounced main effects of institutional domain as a factor influencing cause and blame judgments, we revealed few significant interaction effects of the latter with other experimental factors used for vignettes construction.